Download or read book Electron Spectroscopy for Surface Analysis written by H. Ibach and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of surface physics and surface chemistry as a science is closely related to the technical development of a number of methods involving electrons either as an excitation source or as an emitted particle carrying characteristic information. Many of these various kinds of electron spectroscopies have become commercially available and have made their way into industrial laboratories. Others are still in an early stage, but may become of increasing importance in the future. In this book an assessment of the various merits and possible drawbacks of the most frequently used electron spectroscopies is attempted. Emphasis is put on prac tical examples and experimental design rather than on theoretical considerations. The book addresses itself to the reader who wishes to know which electron spectroscopy or which combination of different electron spectroscopies he may choose for the particular problems under investigation. After a brief introduction the practical design of electron spectrometers and their figures of merit important for the different applications are discussed in Chapter 2. Chapter 3 deals with electron excited electron spectroscopies which are used for the elemental analysis of surfaces. Structure analysis by electron diffrac tion is described in Chapter 4 with special emphasis on the use of electron diffrac tion for the investigation of surface imperfections. For the application of electron diffraction to surface crystallography in general, the reader is referred to Volume 4 of "Topics in Applied Physics".

Download or read book Electron Spectroscopy written by C. R. Brundle and published by Mittal Publications. This book was released on 2002 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Auger Electron Spectroscopy written by Donald T. Hawkins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Auger electron spectroscopy is rapidly developing into the single most powerful analytical technique in basic and applied science.for investigating the chemical and structural properties of solids. Its ex plosive growth beginning in 1967 was triggered by the development of Auger analyzers capable of de tecting one atom layer of material in a fraction of a second. Continued growth was guaranteed firstly by the commercial availability of apparatus which combined the capabilities of scanning electron mi croscopy and ion-mill depth profiling with Auger analysis, and secondly by the increasing need to know the atomistics of many processes in fundamental research and engineering applications. The expanding use of Auger analysis was accompanied by an increase in the number of publications dealing with it. Because of the developing nature of Auger spectroscopy, the articles have appeared in many different sources covering diverse disciplines, so that it is extremely difficult to discover just what has or has not been subjected to Auger analysis. In this situation, a comprehensive bibliography is obviou-sly useful to those both inside and outside the field. For those in the field, this bibliography should be a wonderful time saver for locating certain references, in researching a particular topic, or when considering various aspects of instrumentation or data analysis. This bibliography not only provides the most complete listing of references pertinent to surface Auger analysis available today, but it is also a basis for extrapolating from past trends to future expectations.

Download or read book Electronic and Photoelectron Spectroscopy written by Andrew M. Ellis and published by Cambridge University Press. This book was released on 2005-01-13 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic and photoelectron spectroscopy can provide extraordinarily detailed information on the properties of molecules and are in widespread use in the physical and chemical sciences. Applications extend beyond spectroscopy into important areas such as chemical dynamics, kinetics and atmospheric chemistry. This book aims to provide the reader with a firm grounding of the basic principles and experimental techniques employed. The extensive use of case studies effectively illustrates how spectra are assigned and how information can be extracted, communicating the matter in a compelling and instructive manner. Topics covered include laser-induced fluorescence, resonance-enhanced multiphoton ionization, cavity ringdown and ZEKE spectroscopy. The volume is for advanced undergraduate and graduate students taking courses in spectroscopy and will also be useful to anyone encountering electronic and/or photoelectron spectroscopy during their research.

Download or read book Auger and X Ray Photoelectron Spectroscopy in Materials Science written by Siegfried Hofmann and published by Springer Science & Business Media. This book was released on 2012-10-25 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: To anyone who is interested in surface chemical analysis of materials on the nanometer scale, this book is prepared to give appropriate information. Based on typical application examples in materials science, a concise approach to all aspects of quantitative analysis of surfaces and thin films with AES and XPS is provided. Starting from basic principles which are step by step developed into practically useful equations, extensive guidance is given to graduate students as well as to experienced researchers. Key chapters are those on quantitative surface analysis and on quantitative depth profiling, including recent developments in topics such as surface excitation parameter and backscattering correction factor. Basic relations are derived for emission and excitation angle dependencies in the analysis of bulk material and of fractional nano-layer structures, and for both smooth and rough surfaces. It is shown how to optimize the analytical strategy, signal-to-noise ratio, certainty and detection limit. Worked examples for quantification of alloys and of layer structures in practical cases (e.g. contamination, evaporation, segregation and oxidation) are used to critically review different approaches to quantification with respect to average matrix correction factors and matrix relative sensitivity factors. State-of-the-art issues in quantitative, destructive and non-destructive depth profiling are discussed with emphasis on sputter depth profiling and on angle resolved XPS and AES. Taking into account preferential sputtering and electron backscattering corrections, an introduction to the mixing-roughness-information depth (MRI) model and its extensions is presented.

Download or read book Handbook of Monochromatic XPS Spectra written by B. Vincent Crist and published by John Wiley & Sons. This book was released on 2000-10-19 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: These three volumes provide comprehensive information about the instrument, the samples, and the methods used to collect the spectra. The spectra are presented on a landscape format and cover a wide variety of elements,polymers, semiconductors, and other materials. Offers a clear presentation of spectra with the rightamount of experimental detail. All of the experiments have been conducted under controlled conditions on the same instrument by aworld-renowned expert.

Download or read book Spectroscopy for Materials Characterization written by Simonpietro Agnello and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPECTROSCOPY FOR MATERIALS CHARACTERIZATION Learn foundational and advanced spectroscopy techniques from leading researchers in physics, chemistry, surface science, and nanoscience In Spectroscopy for Materials Characterization, accomplished researcher Simonpietro Agnello delivers a practical and accessible compilation of various spectroscopy techniques taught and used to today. The book offers a wide-ranging approach taught by leading researchers working in physics, chemistry, surface science, and nanoscience. It is ideal for both new students and advanced researchers studying and working with spectroscopy. Topics such as confocal and two photon spectroscopy, as well as infrared absorption and Raman and micro-Raman spectroscopy, are discussed, as are thermally stimulated luminescence and spectroscopic studies of radiation effects on optical materials. Each chapter includes a basic introduction to the theory necessary to understand a specific technique, details about the characteristic instrumental features and apparatuses used, including tips for the appropriate arrangement of a typical experiment, and a reproducible case study that shows the discussed techniques used in a real laboratory. Readers will benefit from the inclusion of: Complete and practical case studies at the conclusion of each chapter to highlight the concepts and techniques discussed in the material Citations of additional resources ideal for further study A thorough introduction to the basic aspects of radiation matter interaction in the visible-ultraviolet range and the fundamentals of absorption and emission A rigorous exploration of time resolved spectroscopy at the nanosecond and femtosecond intervals Perfect for Master and Ph.D. students and researchers in physics, chemistry, engineering, and biology, Spectroscopy for Materials Characterization will also earn a place in the libraries of materials science researchers and students seeking a one-stop reference to basic and advanced spectroscopy techniques.

Download or read book Photoelectron Spectroscopy written by Shigemasa Suga and published by Springer. This book was released on 2013-09-07 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectron spectroscopy is now becoming more and more required to investigate electronic structures of various solid materials in the bulk, on surfaces as well as at buried interfaces. The energy resolution was much improved in the last decade down to 1 meV in the low photon energy region. Now this technique is available from a few eV up to 10 keV by use of lasers, electron cyclotron resonance lamps in addition to synchrotron radiation and X-ray tubes. High resolution angle resolved photoelectron spectroscopy (ARPES) is now widely applied to band mapping of materials. It attracts a wide attention from both fundamental science and material engineering. Studies of the dynamics of excited states are feasible by time of flight spectroscopy with fully utilizing the pulse structures of synchrotron radiation as well as lasers including the free electron lasers (FEL). Spin resolved studies also made dramatic progress by using higher efficiency spin detectors and two dimensional spin detectors. Polarization dependent measurements in the whole photon energy spectrum of the spectra provide useful information on the symmetry of orbitals. The book deals with the fundamental concepts and approaches for the application of this technique to materials studies. Complementary techniques such as inverse photoemission, photoelectron diffraction, photon spectroscopy including infrared and X-ray and scanning tunneling spectroscopy are presented. This book provides not only a wide scope of photoelectron spectroscopy of solids but also extends our understanding of electronic structures beyond photoelectron spectroscopy.

Download or read book NEXAFS Spectroscopy written by Joachim Stöhr and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first ever comprehensive treatment of NEXAFS spectroscopy. It is suitable for novice researchers as an introduction to the field, while experts will welcome the detailed description of state-of-the-art instrumentation and analysis techniques, along with the latest experimental and theoretical results.

Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.

Download or read book Photoelectron Spectroscopy written by Stefan Hüfner and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date introduction to the field, treating in depth the electronic structures of atoms, molecules, solids and surfaces, together with brief descriptions of inverse photoemission, spin-polarized photoemission and photoelectron diffraction. Experimental aspects are considered throughout and the results carefully interpreted by theory. A wealth of measured data is presented in tabullar for easy use by experimentalists.

Download or read book Practical Guide to Surface Science and Spectroscopy written by Yip-Wah Chung and published by Elsevier. This book was released on 2012-12-02 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Guide to Surface Science and Spectroscopy provides a practical introduction to surface science as well as describes the basic analytical techniques that researchers use to understand what occurs at the surfaces of materials and at their interfaces. These techniques include auger electron spectroscopy, photoelectron spectroscopy, inelastic scattering of electrons and ions, low energy electron diffraction, scanning probe microscopy, and interfacial segregation. Understanding the behavior of materials at their surfaces is essential for materials scientists and engineers as they design and fabricate microelectronics and semiconductor devices. The book gives over 100 examples, discussion questions and problems with varying levels of difficulty. Included with this book is a CD-ROM, which not only contains the same information, but also provides many elements of animation and interaction that are not easily emulated on paper. In diverse subject matters ranging from the operation of ion pumps, computer-assisted data acquisition to tapping mode atomic force microscopy, the interactive component is especially helpful in conveying difficult concepts and retention of important information. The succinct style and organization of this practical guide is ideal for anyone who wants to get up to speed on a given topic in surface spectroscopy or phenomenon within a reasonable amount of time. - Both theory and practice are emphasized - Logical organization allows one to get up to speed on any given topic quickly - Numerous examples, questions for discussion and practice problems are included - The CD includes animation and interactive elements that help to convey difficult concepts

Download or read book Molten Salt Chemistry written by Gleb Mamantov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molten salts are of considerable significance to chemical technology. Applications range from the established ones, such as the production of aluminum, magnesium, sodium and fluorine, to those as yet to be fully exploited, such as molten salt batteries and fuel cells, catalysis, and solar energy. Molten salts are investigated for different purposes by many diverse techniques. There is a need to keep investigators working in different areas, such as metal production, power sources, and glass industry, aware of progress in various specialties, as well as to familiarize new research workers with the fundamental aspects of the broad field of molten salt _ chemistry. This volume constitutes the plenary lectures presented at the NATO Advanced Study Institute on Molten Salt Chemistry, Camerino, Italy, August 3-15, 1986. The fundamentals and several selected applications of molten salt chemistry were addressed. The major fundamental topics covered at this ASI were the structure of melts, thermodynamics of molten salt mixtures, theoretical and experimental studies of transport processes, metal-metal salt solutions, solvent properties of melt systems, acid-base effects in molten salt chemistry, electronic absorption, vibrational, and nuclear magnetic resonance spectroscopy of melt systems, electrochemistry and electroanalytical chemistry in molten salts, and organic chemistry in molten salts. The applied aspects of molten salt chemistry included the chemistry of aluminum production, electrodeposition using molten salts, and molten salt batteries and fuel cells.

Download or read book Fuel Cells and Hydrogen written by Viktor Hacker and published by Elsevier. This book was released on 2018-07-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells and Hydrogen: From Fundamentals to Applied Research provides an overview of the basic principles of fuel cell and hydrogen technology, which subsequently allows the reader to delve more deeply into applied research. In addition to covering the basic principles of fuel cells and hydrogen technologies, the book examines the principles and methods to develop and test fuel cells, the evaluation of the performance and lifetime of fuel cells and the concepts of hydrogen production. Fuel Cells and Hydrogen: From Fundamentals to Applied Research acts as an invaluable reference book for fuel cell developers and students, researchers in industry entering the area of fuel cells and lecturers teaching fuel cells and hydrogen technology. - Includes laboratory methods for fuel cell characterization and manufacture - Outlines approaches in modelling components, cells and stacks - Covers practical and theoretical methods for hydrogen production and storage

Download or read book X ray Photoelectron Spectroscopy written by Paul van der Heide and published by John Wiley & Sons. This book was released on 2011-11-01 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers interested in the field of X-ray Photoelectron Spectroscopy (XPS) to the practical concepts in this field. The book first introduces the reader to the language and concepts used in this field and then demonstrates how these concepts are applied. Including how the spectra are produced, factors that can influence the spectra (all initial and final state effects are discussed), how to derive speciation, volume analysed and how one controls this (includes depth profiling), and quantification along with background substraction and curve fitting methodologies. This is presented in a concise yet comprehensive manner and each section is prepared such that they can be read independently of each other, and all equations are presented using the most commonly used units. Greater emphasis has been placed on spectral understanding/interpretation. For completeness sake, a description of commonly used instrumentation is also presented. Finally, some complementary surface analytical techniques and associated concepts are reviewed for comparative purposes in stand-alone appendix sections.

Download or read book Handbook of Surface and Interface Analysis written by John C. Riviere and published by CRC Press. This book was released on 2009-06-24 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The original Handbook of Surface and Interface Analysis: Methods for Problem-Solving was based on the authors' firm belief that characterization and analysis of surfaces should be conducted in the context of problem solving and not be based on the capabilities of any individual technique. Now, a decade later, trends in science and technology appear

Download or read book Handbook of Conducting Polymers Second Edition written by Terje A. Skotheim and published by CRC Press. This book was released on 1997-11-24 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing theory and transport, synthesis, processing, properties, and applications, this second edition of a standard resource covers advances in the field of electrically conducting polymers and contains more than 1500 drawings, photographs, tables, and equations. Maintaining the style of presentation and depth of coverage that made the first edition so popular, it contains the authoritative contributions of an interdisciplinary team of world-renowned experts encompassing the fields of chemistry, physics, materials science, and engineering. The Handbook of Conducting Polymers highlights progress, delineates improvements, and examines novel tools for polymer and materials scientists..