Download or read book System Level ESD Co Design written by Charvaka Duvvury and published by John Wiley & Sons. This book was released on 2017-05-05 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: An effective and cost efficient protection of electronic system against ESD stress pulses specified by IEC 61000-4-2 is paramount for any system design. This pioneering book presents the collective knowledge of system designers and system testing experts and state-of-the-art techniques for achieving efficient system-level ESD protection, with minimum impact on the system performance. All categories of system failures ranging from 'hard' to 'soft' types are considered to review simulation and tool applications that can be used. The principal focus of System Level ESD Co-Design is defining and establishing the importance of co-design efforts from both IC supplier and system builder perspectives. ESD designers often face challenges in meeting customers' system-level ESD requirements and, therefore, a clear understanding of the techniques presented here will facilitate effective simulation approaches leading to better solutions without compromising system performance. With contributions from Robert Ashton, Jeffrey Dunnihoo, Micheal Hopkins, Pratik Maheshwari, David Pomerenke, Wolfgang Reinprecht, and Matti Usumaki, readers benefit from hands-on experience and in-depth knowledge in topics ranging from ESD design and the physics of system ESD phenomena to tools and techniques to address soft failures and strategies to design ESD-robust systems that include mobile and automotive applications. The first dedicated resource to system-level ESD co-design, this is an essential reference for industry ESD designers, system builders, IC suppliers and customers and also Original Equipment Manufacturers (OEMs). Key features: Clarifies the concept of system level ESD protection. Introduces a co-design approach for ESD robust systems. Details soft and hard ESD fail mechanisms. Detailed protection strategies for both mobile and automotive applications. Explains simulation tools and methodology for system level ESD co-design and overviews available test methods and standards. Highlights economic benefits of system ESD co-design.

Download or read book Chemical Electrostatics written by Fernando Galembeck and published by Springer. This book was released on 2017-03-09 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides new clues for understanding electrostatic charging in solids and liquids, resulting from the surge of research in this active area of science that is taking place since the 1990's but is still largely unknown to most researchers, lecturers and engineers. Written by a leading researcher in this field, this book describes the formation and properties of the Earth capacitor, the production of environmental electricity and its effect on natural and anthropic systems and examines many situations in which water may play a decisive role in electrostatic behavior. The authors present an informed critique of the long-held assumption that pure substances should be electroneutral. In this regard, the authors show that charge partition and accumulation is expected considering the electrochemical potential under non-zero electrostatic potential, which prevails at Earth surface. This book provides conceptual tools to guide the reader through the complexities and consequences of electrostatic phenomena while covering exciting current topics such as energy scavenging from the environment, electrostatic based green production, energy-saving processes, electrochemistry at the solid-gas interface, therapeutic electrostatic treatments, applications in sanitation and pest control and control of atmospheric electricity and its use in climate engineering.

Download or read book CMOSET 2010 Nano and Micro Technologies Track Presentation Slides written by CMOS Emerging Technologies Research and published by CMOS Emerging Technologies. This book was released on 2010-05-31 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The ESD Control Program Handbook written by Jeremy M. Smallwood and published by John Wiley & Sons. This book was released on 2020-09-01 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the understanding and practical skills needed to develop and maintain an effective ESD control program for manufacturing, storage, and handling of ESD sensitive components This essential guide to ESD control programs explains the principles and practice of ESD control in an easily accessible way whilst also providing more depth and a wealth of references for those who want to gain a deeper knowledge of the subject. It describes static electricity and ESD principles such as triboelectrification, electrostatic fields, and induced voltages, with the minimum of theory or mathematics. It is designed for the reader to "dip into" as required, rather than need to read cover to cover. The ESD Control Program Handbook begins with definitions and commonly used terminology, followed by the principles of static electricity and ESD control. Chapter 3 discusses ESD susceptible electronic devices, and how ESD susceptibility of a component is measured. This is followed by the “Seven habits of a highly effective ESD program”, explaining the essential activities of an effective ESD control program. While most texts mainly address manual handling of ESD susceptible devices, Chapter 5 extends the discussion to ESD control in automated systems, processes and handling, which form a major part of modern electronic manufacture. Chapter 6 deals with requirements for compliance given by the IEC 61340-5-1 and ANSI/ESD S20.20 ESD control standards. Chapter 7 gives an overview of the selection, use, care and maintenance of equipment and furniture commonly used to control ESD risks. The chapter explains how these often work together as part of a system and must be specified with that in mind. ESD protective packaging is available in an extraordinary range of forms from bags, boxes and bubble wrap to tape and reel packaging for automated processes. The principles and practice of this widely misunderstood area of ESD control are introduced in Chapter 8. The thorny question of how to evaluate an ESD control program is addressed in Chapter 9 with a goal of compliance with a standard as well as effective control of ESD risks and possible customer perceptions. Whilst evaluating an existing ESD control program provides challenges, developing an ESD control program from scratch provides others. Chapter 10 gives an approach to this. Standard test methods used in compliance with ESD control standards are explained and simple test procedures given in Chapter 11. ESD Training has long been recognised as essential in maintaining effective ESD control. Chapter 12 discusses ways of covering essential topics and how to demonstrate static electricity in action. The book ends with a look at where ESD control may go in the near future. The ESD Control Program Handbook: Gives readers a sound understanding of the subject to analyze the ESD control requirements of manufacturing processes, and develop an effective ESD control program Provides practical knowledge, as well as sufficient theory and background to understand the principles of ESD control Teaches how to track and identify how ESD risks arise, and how to identify fitting means for minimizing or eliminating them Emphasizes working with modern ESD control program standards IEC 61340-5-1 and ESD S20:20 The ESD Control Program Handbook is an invaluable reference for anyone tasked with setting up, evaluating, or maintaining an effective ESD control program, training personnel, or making ESD control related measurements. It would form an excellent basis for a University course on the subject as well as a guide and resource for industry professionals.

Download or read book ESD Protection Methodologies written by Marise Bafleur and published by Elsevier. This book was released on 2017-07-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failures caused by electrostatic discharges (ESD) constitute a major problem concerning the reliability and robustness of integrated circuits and electronic systems. This book summarizes the many diverse methodologies aimed at ESD protection and shows, through a number of concrete studies, that the best approach in terms of robustness and cost-effectiveness consists of implementing a global strategy of ESD protection. ESD Protection Methodologies begins by exploring the various normalized test techniques that are used to qualify ESD robustness as well as characterization and defect localization methods aimed at implementing corrective measures. Due to the increasing complexity of integrated circuits, it is important to be able to provide a simulation in which the implemented ESD protection strategy provides the desired protection, while not harming the performance levels of the circuit. Therefore, the main features and difficulties related to the different types of simulation, finite element, SPICE-type and behavioral, are then studied. To conclude, several case studies are presented which provide real-life examples of the approaches explained in the previous chapters and validate a number of the strategies from component to system level. - Provides a global ESD protection approach from component to system, including both the proposal of investigation techniques and predictive simulation methodologies - Addresses circuit and system designers as well as failure analysis engineers - Provides the description of specifically developed investigation techniques and the application of the proposed methodologies to real case studies

Download or read book Low Frequency Electromagnetic Modeling for Electrical and Biological Systems Using MATLAB written by Sergey N. Makarov and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a detailed and systematic description of the Method of Moments (Boundary Element Method) for electromagnetic modeling at low frequencies and includes hands-on, application-based MATLAB® modules with user-friendly and intuitive GUI and a highly visualized interactive output. Includes a full-body computational human phantom with over 120 triangular surface meshes extracted from the Visible Human Project® Female dataset of the National library of Medicine and fully compatible with MATLAB® and major commercial FEM/BEM electromagnetic software simulators. This book covers the basic concepts of computational low-frequency electromagnetics in an application-based format and hones the knowledge of these concepts with hands-on MATLAB® modules. The book is divided into five parts. Part 1 discusses low-frequency electromagnetics, basic theory of triangular surface mesh generation, and computational human phantoms. Part 2 covers electrostatics of conductors and dielectrics, and direct current flow. Linear magnetostatics is analyzed in Part 3. Part 4 examines theory and applications of eddy currents. Finally, Part 5 evaluates nonlinear electrostatics. Application examples included in this book cover all major subjects of low-frequency electromagnetic theory. In addition, this book includes complete or summarized analytical solutions to a large number of quasi-static electromagnetic problems. Each Chapter concludes with a summary of the corresponding MATLAB® modules. Combines fundamental electromagnetic theory and application-oriented computation algorithms in the form of stand alone MATLAB® modules Makes use of the three-dimensional Method of Moments (MoM) for static and quasistatic electromagnetic problems Contains a detailed full-body computational human phantom from the Visible Human Project® Female, embedded implant models, and a collection of homogeneous human shells Low-Frequency Electromagnetic Modeling for Electrical and Biological Systems Using MATLAB® is a resource for electrical and biomedical engineering students and practicing researchers, engineers, and medical doctors working on low-frequency modeling and bioelectromagnetic applications.

Download or read book Electrostatic Discharge Protection written by Juin J. Liou and published by CRC Press. This book was released on 2017-12-19 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic discharge (ESD) is one of the most prevalent threats to electronic components. In an ESD event, a finite amount of charge is transferred from one object (i.e., human body) to another (i.e., microchip). This process can result in a very high current passing through the microchip within a very short period of time. Thus, more than 35 percent of single-event chip damages can be attributed to ESD events, and designing ESD structures to protect integrated circuits against the ESD stresses is a high priority in the semiconductor industry. Electrostatic Discharge Protection: Advances and Applications delivers timely coverage of component- and system-level ESD protection for semiconductor devices and integrated circuits. Bringing together contributions from internationally respected researchers and engineers with expertise in ESD design, optimization, modeling, simulation, and characterization, this book bridges the gap between theory and practice to offer valuable insight into the state of the art of ESD protection. Amply illustrated with tables, figures, and case studies, the text: Instills a deeper understanding of ESD events and ESD protection design principles Examines vital processes including Si CMOS, Si BCD, Si SOI, and GaN technologies Addresses important aspects pertinent to the modeling and simulation of ESD protection solutions Electrostatic Discharge Protection: Advances and Applications provides a single source for cutting-edge information vital to the research and development of effective, robust ESD protection solutions for semiconductor devices and integrated circuits.

Download or read book Microelectronics Failure Analysis written by EDFAS Desk Reference Committee and published by ASM International. This book was released on 2011 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references and index.

Download or read book Mixed Signal Circuits written by Thomas Noulis and published by CRC Press. This book was released on 2018-09-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Signal Circuits offers a thoroughly modern treatment of integrated circuit design in the context of mixed-signal applications. Featuring chapters authored by leading experts from industry and academia, this book: Discusses signal integrity and large-scale simulation, verification, and testing Demonstrates advanced design techniques that enable digital circuits and sensitive analog circuits to coexist without any compromise Describes the process technology needed to address the performance challenges associated with developing complex mixed-signal circuits Deals with modeling topics, such as reliability, variability, and crosstalk, that define pre-silicon design methodology and trends, and are the focus of companies involved in wireless applications Develops methods to move analog into the digital domain quickly, minimizing and eliminating common trade-offs between performance, power consumption, simulation time, verification, size, and cost Details approaches for very low-power performances, high-speed interfaces, phase-locked loops (PLLs), voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), and biomedical filters Delineates the respective parts of a full system-on-chip (SoC), from the digital parts to the baseband blocks, radio frequency (RF) circuitries, electrostatic-discharge (ESD) structures, and built-in self-test (BIST) architectures Mixed-Signal Circuits explores exciting opportunities in wireless communications and beyond. The book is a must for anyone involved in mixed-signal circuit design for future technologies.

Download or read book ANSI ESDA JEDEC JS 002 2018 ESDA JEDEC Joint Standard for Electrostatic Discharge Sensitivity Testing Charged Device Model CDM Device Level written by EOS/ESD Association, Incorporated and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gallium Nitride enabled High Frequency and High Efficiency Power Conversion written by Gaudenzio Meneghesso and published by Springer. This book was released on 2018-05-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates to readers why Gallium Nitride (GaN) transistors have a superior performance as compared to the already mature Silicon technology. The new GaN-based transistors here described enable both high frequency and high efficiency power conversion, leading to smaller and more efficient power systems. Coverage includes i) GaN substrates and device physics; ii) innovative GaN -transistors structure (lateral and vertical); iii) reliability and robustness of GaN-power transistors; iv) impact of parasitic on GaN based power conversion, v) new power converter architectures and vi) GaN in switched mode power conversion. Provides single-source reference to Gallium Nitride (GaN)-based technologies, from the material level to circuit level, both for power conversions architectures and switched mode power amplifiers; Demonstrates how GaN is a superior technology for switching devices, enabling both high frequency, high efficiency and lower cost power conversion; Enables design of smaller, cheaper and more efficient power supplies.

Download or read book Handbook of Mems for Wireless and Mobile Applications written by Deepak Uttamchandani and published by Elsevier. This book was released on 2013-08-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for mobile and wireless sensing necessitates the use of highly integrated technology featuring small size, low weight, high performance and low cost: micro-electro-mechanical systems (MEMS) can meet this need. The Handbook of MEMS for wireless and mobile applications provides a comprehensive overview of radio frequency (RF) MEMS technologies and explores the use of these technologies over a wide range of application areas.Part one provides an introduction to the use of RF MEMS as an enabling technology for wireless applications. Chapters review RF MEMS technology and applications as a whole before moving on to describe specific technologies for wireless applications including passive components, phase shifters and antennas. Packaging and reliability of RF MEMS is also discussed. Chapters in part two focus on wireless techniques and applications of wireless MEMS including biomedical applications, such as implantable MEMS, intraocular pressure sensors and wireless drug delivery. Further chapters highlight the use of RF MEMS for automotive radar, the monitoring of telecommunications reliability using wireless MEMS and the use of optical MEMS displays in portable electronics.With its distinguished editor and international team of expert authors, the Handbook of MEMS for wireless and mobile applications is a technical resource for MEMS manufacturers, the electronics industry, and scientists, engineers and academics working on MEMS and wireless systems. - Reviews the use of radio frequency (RF) MEMS as an enabling technology for wireless applications - Discusses wireless techniques and applications of wireless MEMS, including biomedical applications - Describes monitoring structures and the environment with wireless MEMS

Download or read book Understanding Smart Sensors written by Randy Frank and published by Artech House Publishers. This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Two of the most important trends in sensor development in recent years have been advances in micromachined sensing elements of all kinds, and the increase in intelligence applied at the sensor level. This book addresses both, and provides a good overview of current technology". -- I&CS

Download or read book Ansi esda jedec Js 001 2010 written by EOS/ESD Association, Incorporated and published by . This book was released on 2010-02-09 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Overstress EOS written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2013-08-27 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Overstress (EOS) continues to impact semiconductor manufacturing, semiconductor components and systems as technologies scale from micro- to nano-electronics. This bookteaches the fundamentals of electrical overstress and how to minimize and mitigate EOS failures. The text provides a clear picture of EOS phenomena, EOS origins, EOS sources, EOS physics, EOS failure mechanisms, and EOS on-chip and system design. It provides an illuminating insight into the sources of EOS in manufacturing, integration of on-chip, and system level EOS protection networks, followed by examples in specific technologies, circuits, and chips. The book is unique in covering the EOS manufacturing issues from on-chip design and electronic design automation to factory-level EOS program management in today’s modern world. Look inside for extensive coverage on: Fundamentals of electrical overstress, from EOS physics, EOS time scales, safe operating area (SOA), to physical models for EOS phenomena EOS sources in today’s semiconductor manufacturing environment, and EOS program management, handling and EOS auditing processing to avoid EOS failures EOS failures in both semiconductor devices, circuits and system Discussion of how to distinguish between EOS events, and electrostatic discharge (ESD) events (e.g. such as human body model (HBM), charged device model (CDM), cable discharge events (CDM), charged board events (CBE), to system level IEC 61000-4-2 test events) EOS protection on-chip design practices and how they differ from ESD protection networks and solutions Discussion of EOS system level concerns in printed circuit boards (PCB), and manufacturing equipment Examples of EOS issues in state-of-the-art digital, analog and power technologies including CMOS, LDMOS, and BCD EOS design rule checking (DRC), LVS, and ERC electronic design automation (EDA) and how it is distinct from ESD EDA systems EOS testing and qualification techniques, and Practical off-chip ESD protection and system level solutions to provide more robust systems Electrical Overstress (EOS): Devices, Circuits and Systems is a continuation of the author’s series of books on ESD protection. It is an essential reference and a useful insight into the issues that confront modern technology as we enter the nano-electronic era.

Download or read book Electromagnetic Compatibility of Integrated Circuits written by Sonia Ben Dhia and published by Springer Science & Business Media. This book was released on 2006-06-04 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic Compatibility of Integrated Circuits: Techniques for Low Emission and Susceptibility focuses on the electromagnetic compatibility of integrated circuits. The basic concepts, theory, and an extensive historical review of integrated circuit emission and susceptibility are provided. Standardized measurement methods are detailed through various case studies. EMC models for the core, I/Os, supply network, and packaging are described with applications to conducted switching noise, signal integrity, near-field and radiated noise. Case studies from different companies and research laboratories are presented with in-depth descriptions of the ICs, test set-ups, and comparisons between measurements and simulations. Specific guidelines for achieving low emission and susceptibility derived from the experience of EMC experts are presented.

Download or read book On Chip ESD Protection for Integrated Circuits written by Albert Z.H. Wang and published by Springer Science & Business Media. This book was released on 2006-01-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and insightful book discusses ESD protection circuit design problems from an IC designer's perspective. On-Chip ESD Protection for Integrated Circuits: An IC Design Perspective provides both fundamental and advanced materials needed by a circuit designer for designing ESD protection circuits, including: Testing models and standards adopted by U.S. Department of Defense, EIA/JEDEC, ESD Association, Automotive Electronics Council, International Electrotechnical Commission, etc. ESD failure analysis, protection devices, and protection of sub-circuits Whole-chip ESD protection and ESD-to-circuit interactions Advanced low-parasitic compact ESD protection structures for RF and mixed-signal IC's Mixed-mode ESD simulation-design methodologies for design prediction ESD-to-circuit interactions, and more! Many real world ESD protection circuit design examples are provided. The book can be used as a reference book for working IC designers and as a textbook for students in the IC design field.