Download or read book Analytical Approach to Cold Extrusion written by M. E. Ward and published by . This book was released on 1976 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of metal extrusion can demonstrate cost reduction,, and material and energy conservation when compared with conventional manufacturing processes. Using computer techniques to handle the complex mathematics and the.
Download or read book Statistical Analysis of the Effects Cold Extrusion Has on Fragmentation written by Thomas A. McWilliams and published by . This book was released on with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simulation of Material Processing Theory Methods and Application written by Ken-ichiro Mori and published by CRC Press. This book was released on 2001-01-01 with total page 1170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains about 180 papers including seven keynotes presented at the 7th NUMIFORM Conference. It reflects the state-of-the-art of simulation of industrial forming processes such as rolling, forging, sheet metal forming, injection moulding and casting.
Download or read book Mechanical Engineering and Green Manufacturing written by Sheng Yi Li and published by Trans Tech Publications Ltd. This book was released on 2010-10-25 with total page 2086 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection of 390 peer-reviewed papers was contributed to by researchers from various disciplines: Mechanical Engineering Design, Green Manufacturing Technology, Applied Mechanics, Sustainable Materials, etc.
Download or read book The Mechanics of Metal Extrusion written by William Johnson and published by Manchester University Press. This book was released on 1962 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact and Cold Extrusion of Metals written by John Laurence Everhart and published by . This book was released on 1964 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONTENTS - 1. INTRODUCTION - PART 1: THE PROCESS - 2. FUNDAMENTALS OF IMPACT EXTRUSION - 3. EXTRUSION PRESSURE - 4. TOOLING FOR IMPACT EXTRUSION - 5. MATERIALS FOR TOOLS - 6. LUBRICATION - 7. HIGH ENERGY RATE FORMING - PART 2: THE PRODUCT - 8. FACTORS IN DESIGN - 9. ALUMINUM AND ALUMINUM ALLOYS - 10. LEAD, TIN, COLLAPSIBLE TUBES - 11. OTHER NONFERROUS METALS - 12. FERROUS METALS - BIBLIOGRAPHY - INDEX - Excerpt from Book (short): Preface - The impact or cold extrusion of metals is a "chipless machining" process that can greatly reduce costs of material and labor if properly applied. Within certain limitations in shape, some parts can be produced by this process that often require only trimming to length. On others, the secondary operations are reduced greatly over those required for several of the competing processes. Finally, certain components can be made that can be produced by no other method. Impact extrusion can be employed for the production of parts from a wide range of metallic materials. In commercial production at present are components produced from aluminum, copper, lead, magnesium, tin, zinc and their alloys and various steels. In the development stage are parts produced from less common metals, such as titanium and molybdenum. The aim of this book is to present a coordinated description of impact extrusion. Its purpose is to present the information required by an engineer to determine whether the process is applicable to his products, and to assist the metallurgist in selecting the metal to be used. The book is based on personal experience, talks, and correspondence with producers of components, and a search of the free-world technical literature. It is divided into two parts. The first deals with the underlying principles and the characteristics of the process; the second, with the metals being extruded and the products.
Download or read book Technical Digest written by and published by . This book was released on 2000 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CIRP Annals written by International Institution for Production Engineering Research and published by . This book was released on 1994 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques written by Vadim Silberschmidt and published by Elsevier. This book was released on 2020-04-03 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Materials in Modern Manufacturing Methods and Processing Techniques provides a detailed overview of the latest developments in the mechanics of modern metal forming manufacturing. Focused on mechanics as opposed to process, it looks at the mechanical behavior of materials exposed to loading and environmental conditions related to modern manufacturing processes, covering deformation as well as damage and fracture processes. The book progresses from forming to machining and surface-treatment processes, and concludes with a series of chapters looking at recent and emerging technologies. Other topics covered include simulations in autofrettage processes, modeling strategies related to cutting simulations, residual stress caused by high thermomechanical gradients and pultrusion, as well as the mechanics of the curing process, forging, and cold spraying, among others. Some non-metallic materials, such as ceramics and composites, are covered as well. - Synthesizes the latest research in the mechanics of modern metal forming processes - Suggests theoretical models and numerical codes to predict mechanical responses - Covers mechanics of shot peening, pultrusion, hydroforming, magnetic pulse forming - Considers applicability of different materials and processes for optimum performance
Download or read book An Analysis of Canned Extrusion Using Analytical Methods and the Experimental Extrusion of Cast IN100 written by Robert L. Goetz and published by . This book was released on 1990 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forming the Future written by Glenn Daehn and published by Springer Nature. This book was released on 2021-07-10 with total page 2890 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this collection, scientists and engineers from across industry, academia, and government present their latest improvements and innovations in all aspects of metal forming science and technology, with the intent of facilitating linkages and collaborations among these groups. Chapters cover the breadth of metal forming topics, from fundamental science to industrial application.
Download or read book AMST 99 Advanced Manufacturing Systems and Technology written by Elso Kuljanic and published by Springer. This book was released on 2014-05-04 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Conference on Advanced Manufacturing Systems and Technology – AMST ’99 – aims at presenting up-to-date information on the latest developments research results and industrial experience in the field of machining of conventional and advanced materials, high speed machining, forming, modeling, nonconventional machining processes, new tool materials and tool systems, rapid prototyping, life cycle of products and quality assurance, thus providing an international forum for a beneficial exchange of ideas, and furthering a favourable cooperation between research and industry.
Download or read book Applied Plasticity Second Edition written by Jagabandhu Chakrabarty and published by Springer Science & Business Media. This book was released on 2010-07-07 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book begins with the fundamentals of the mathematical theory of plasticity. The discussion then turns to the theory of plastic stress and its applications to structural analysis. It concludes with a wide range of topics in dynamic plasticity including wave propagation, armor penetration, and structural impact in the plastic range. In view of the rapidly growing interest in computational methods, an appendix presents the fundamentals of a finite-element analysis of metal-forming problems.
Download or read book Handbook of Workability and Process Design written by George E. Dieter and published by ASM International. This book was released on 2003-01-01 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Modelling of Material Deformation Processes written by Peter Hartley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principal aim of this text is to encourage the development and application of numerical modelling techniques as an aid to achieving greater efficiency and optimization of metal-forming processes. The contents of this book have therefore been carefully planned to provide both an introduction to the fundamental theory of material deformation simulation, and also a comprehensive survey of the "state-of-the-art" of deformation modelling techniques and their application to specific and industrially relevant processes. To this end, leading international figures in the field of material deformation research have been invited to contribute chapters on subjects on which they are acknowledged experts. The information in this book has been arranged in four parts: Part I deals with plasticity theory, Part II with various numerical modelling techniques, Part III with specific process applications and material phenomena and Part IV with integrated computer systems. The objective of Part I is to establish the underlying theory of material deformation on which the following chapters can build. It begins with a chapter which reviews the basic theories of classical plasticity and describes their analytical representations. The second chapter moves on to look at the theory of deforming materials and shows how these expressions may be used in numerical techniques. The last two chapters of Part I provide a review of isotropic plasticity and anisotropic plasticity.
