Download or read book Analytical and Computational Methods in Engineering Rock Mechanics written by Edwin T. Brown and published by Taylor & Francis. This book was released on 1987 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very Good,No Highlights or Markup,all pages are intact.
Download or read book Numerical Methods in Rock Mechanics written by G. N. Pande and published by John Wiley & Sons. This book was released on 1990 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been important changes in rock mechanics during the last decade. This book reflects these changes, particularly in the use of computational methods. It covers the properties and behaviour of rocks, and the ways in which these can be modelled numerically.
Download or read book Engineering Geology written by Wang Sijing and published by VSP. This book was released on 1997-11 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the engineering geological and environmental problems of major engineering works, rock and soil properties, and protection of the geoenvironment and reduction of geohazards, reflecting the major achievements and advancement of engineering geological science and technology.
Download or read book Discontinuous Deformation Analysis in Rock Mechanics Practice written by Yossef H. Hatzor and published by CRC Press. This book was released on 2017-07-20 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical, discrete element, Discontinuous Deformation Analysis (DDA) method was developed by Dr. Gen-hua Shi while he was working at the University of California, Berkeley, under the supervision of Prof. Richard E. Goodman in the late 1980s. Two-dimensional DDA was published in 1993 and three-dimensional DDA in 2001. Since its publication DDA has been verified, validated and applied in numerous studies worldwide and is now considered a powerful and robust method to address both static and dynamic engineering problems in discontinuous rock masses. In this book Yossef H. Hatzor and Guowei Ma, co-chairs of the International Society for Rock Mechanics (ISRM) Commission on DDA, join Dr. Shi in authoring a monograph that presents the state of the art in DDA research. A comprehensive discussion of DDA development since its publication is provided in Chapter 1, followed by concise reviews of 2D and 3D DDA in chapters 2 and 3. Procedures to select geological and numerical input parameters for DDA are discussed in Chapter 4, and DDA validation and verification is presented in Chapter 5. Applications of DDA in underground and rock slope engineering projects are discussed in chapters 6 and 7. In Chapter 8 the novel contact theory recently developed by Dr. Shi is published in its complete form, for the first time. This book is published within the framework of the ISRM Book Series and is the contribution of the ISRM DDA Commission to the international rock mechanics community.
Download or read book Engineering Rock Mechanics written by John A Hudson and published by Elsevier. This book was released on 2000-06-12 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering rock mechanics is the discipline used to design structures built in rock. These structures encompass building foundations, dams, slopes, shafts, tunnels, caverns, hydroelectric schemes, mines, radioactive waste repositories and geothermal energy projects: in short, any structure built on or in a rock mass. Despite the variety of projects that use rock engineering, the principles remain the same. Engineering Rock Mechanics clearly and systematically explains the key principles behind rock engineering. The book covers the basic rock mechanics principles; how to study the interactions between these principles and a discussion on the fundamentals of excavation and support and the application of these in the design of surface and underground structures. Engineering Rock Mechanics is recommended as an across-the-board source of information for the benefit of anyone involved in rock mechanics and rock engineering.
Download or read book Development and Application of Discontinuous Modelling for Rock Engineering written by Ming Lu and published by CRC Press. This book was released on 2021-07-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thirty papers published in this book represent the latest developments in Discontinuous Deformation Analysis (DDA). The Numerical Manifold Method (NMM) and other numerical methods and their applications are also covered, as are the theoretical contributions of 3D DDA, modelling and visualization of 3D joint systems, and high-order NMM. Applications of these advances include the stability of underground works, rock slopes and boreholes.
Download or read book Rock Mechanics and Engineering Volume 3 written by Xia-Ting Feng and published by CRC Press. This book was released on 2017-04-21 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Modeling & Design is the third volume of the five-volume set Rock Mechanics and Engineering and contains twenty-eight chapters from key experts in the following fields: - Numerical Modeling Methods; - Back Analysis; - Risk Analysis; - Design and Stability Analysis: Overviews; - Design and Stability Analysis: Coupling Process Analysis; - Design and Stability Analysis: Blast Analysis and Design; - Rock Slope Stability Analysis and Design; - Analysis and Design of Tunnels, Caverns and Stopes. The five-volume set “Comprehensive Rock Engineering”, which was published in 1993, has had an important influence on the development of rock mechanics and rock engineering. Significant and extensive advances and achievements in these fields over the last 20 years now justify the publishing of a comparable, new compilation. Rock Mechanics and Engineering represents a highly prestigious, multi-volume work edited by Professor Xia-Ting Feng, with the editorial advice of Professor John A. Hudson. This new compilation offers an extremely wideranging and comprehensive overview of the state-of-the-art in rock mechanics and rock engineering and is composed of peer-reviewed, dedicated contributions by all the key experts worldwide. Key features of this set are that it provides a systematic, global summary of new developments in rock mechanics and rock engineering practices as well as looking ahead to future developments in the fields. Contributors are worldrenowned experts in the fields of rock mechanics and rock engineering, though younger, talented researchers have also been included. The individual volumes cover an extremely wide array of topics grouped under five overarching themes: Principles (Vol. 1), Laboratory and Field Testing (Vol. 2), Analysis, Modelling and Design (Vol. 3), Excavation, Support and Monitoring (Vol. 4) and Surface and Underground Projects (Vol. 5). This multi-volume work sets a new standard for rock mechanics and engineering compendia and will be the go-to resource for all engineering professionals and academics involved in rock mechanics and engineering for years to come.
Download or read book Rock Mechanics and Rock Engineering written by Reşat Ulusay and published by CRC Press. This book was released on 2016-08-19 with total page 1330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mechanics and Rock Engineering: From the Past to the Future contains the contributions presented at EUROCK2016, the 2016 International Symposium of the International Society for Rock Mechanics (ISRM 2016, Ürgüp, Cappadocia Region, Turkey, 29-31 August 2016). The contributions cover almost all aspects of rock mechanics and rock engineering from theories to engineering practices, emphasizing the future direction of rock engineering technologies. The 204 accepted papers and eight keynote papers, are grouped into several main sections: - Fundamental rock mechanics - Rock properties and experimental rock mechanics - Analytical and numerical methods in rock engineering - Stability of slopes in civil and mining engineering - Design methodologies and analysis - Rock dynamics, rock mechanics and rock engineering at historical sites and monuments - Underground excavations in civil and mining engineering - Coupled processes in rock mass for underground storage and waste disposal - Rock mass characterization - Petroleum geomechanics - Carbon dioxide sequestration - Instrumentation-monitoring in rock engineering and back analysis - Risk management, and - the 2016 Rocha Medal Lecture and the 2016 Franklin Lecture Rock Mechanics and Rock Engineering: From the Past to the Future will be of interest to researchers and professionals involved in the various branches of rock mechanics and rock engineering. EUROCK 2016, organized by the Turkish National Society for Rock Mechanics, is a continuation of the successful series of ISRM symposia in Europe, which began in 1992 in Chester, UK.
Download or read book Stability Analysis and Modelling of Underground Excavations in Fractured Rocks written by Jian Zhao and published by Elsevier. This book was released on 2003-12-18 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practical solutions to the challenge of modeling and analyzing rock masses Consolidates a wealth of previously published technical papers on the subject and introduces previously unseen material This authoritative title is a key reference for any Geo-engineer. Rock masses differ considerably from man-made materials, and their properties can vary with location, direction and time. As a result there is a critical need to capture these variations via modeling and analysis. Zhu and Zhao provide an expert introduction to the techniques and analytical methods needed for studying underground excavations in fractured rock masses. The book brings together previously published and new material to provide a comprehensive and up-to-date reference. Provides practical solutions to the challenge of modeling and analyzing rock masses Consolidates a wealth of previously published technical papers on the subject and introduces previously unseen material
Download or read book Advanced Computational Methods and Geomechanics written by Shenghong Chen and published by Springer Nature. This book was released on 2023-01-01 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is intended, through parallel expounding, to help readers comprehensively grasp the intrinsic features of typical advanced computational methods. These methods are created in recent three decades for the understanding of the post-failure of geo-materials accompanied with discontinuous and finite deformation/dislocation, as well as the violent fluid-structure interaction accompanied with strong distortion of water surface. The strong points and weak points of the formalisms for governing equations, the discretization schemes, the nodal interpolation /approximation of field variables, and their connectivity (via support domains, covers, or enrichments), the basic algorithms, etc., are clarified. Being aware of that the differences in these methods are not so large as at the first glance, this book will help readers to select appropriate methods, to improve the methods for their specific purpose, and to evaluate the reliability/applicability of the outcomes in the hazard evaluation of geotechnical (hydraulic) structures beyond extreme work situation. This book may be looked at as an advanced continuation of “Computational Geomechanics and Hydraulic Structures” by the author (2018) (Springer-Verlag, ISBN 978-981-10-8134-7) which elaborates the fundamental computational methods in geomechanics for the routine design of geotechnical (hydraulic) engineering.
Download or read book Computer Methods and Advances in Geomechanics written by Chandra S. Desai and published by Taylor & Francis US. This book was released on 1991 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Discontinuity Analysis for Rock Engineering written by S.D. Priest and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers wishing to build structures on or in rock use the discipline known as rock mechanics. This discipline emerged as a subject in its own right about thirty five years ago, and has developed rapidly ever since. However, rock mechanics is still based to a large extent on analytical techniques that were originally formulated for the mechanical design of structures made from man made materials. The single most important distinction between man-made materials and the natural material rock is that rock contains fractures, of many kinds on many scales; and because the fractures - of whatever kin- represent breaks in the mechanical continuum, they are collectively termed 'discontinuities' . An understanding of the mechanical influence of these discontinuities is essential to all rock engineers. Most of the world is made of rock, and most of the rock near the surface is fractured. The fractures dominate the rock mass geometry, deformation modulus, strength, failure behaviour, permeability, and even the local magnitudes and directions of the in situ stress field. Clearly, an understanding of the presence and mechanics of the discontinuities, both singly and in the rock mass context, is therefore of paramount importance to civil, mining and petroleum engineers. Bearing this in mind, it is surprising that until now there has been no book dedicated specifically to the subject of discontinuity analysis in rock engineering.
Download or read book Analysis and Design Methods written by Catherine Fairhurst and published by Elsevier. This book was released on 2014-06-28 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Design Methods
Download or read book Fundamentals of Rock Mechanics written by John Conrad Jaeger and published by John Wiley & Sons. This book was released on 2009-03-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Widely regarded as the most authoritative and comprehensive book inits field, the fourth edition of Fundamentals of RockMechanics includes new and substantially updated chapters tothis highly praised text. Extensively updated throughout, this new edition containssubstantially expanded chapters on poroelasticity, wavepropogation, and subsurface stresses Features entirely new chapters on rock fractures andmicromechanical models of rock behaviour Discusses fundamental concepts such as stress and strain Offers a thorough introduction to the subject before expertlydelving into a fundamental, self-contained discussion of specifictopics Unavailable for many years, now back by popular demand. An Instructor manual CD-ROM for this title is available. Pleasecontact our Higher Education team at ahref="mailto:[email protected]"[email protected]/afor more information. Reviews: “With this attention to detail, and rigorous adherence toclarity and exactness in description, this edition will consolidatethe standing achieved by the earlier editions as a mostauthoritative and comprehensive book in its field. It will continueto serve as a leading reference work for geoscientists interestedin structural geology, tectonics and petrophysics as well as forcivil, mining and petroleum engineers.” (PetroleumGeoscience) "...I consider this book to be an invaluable reference forstudying and understanding the fundamental science at the base ofrock mechanics. I believe this to be a must-have textbook and Istrongly recommend it to anyone, student or professional,interested in the subject." (Rock Mechanics and RockEngineering) "An excellent book, very well presented, and is a must for theshelves of serious engineers and scientists active or interested inthe fields of rock mechanics and rock engineering.... Highlyrecommended." (South African Geographical Journal, 2008)
Download or read book Rockfall Engineering written by Stéphane Lambert and published by John Wiley & Sons. This book was released on 2013-02-07 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rockfall Engineering is an up-to-date, international picture of the state of the art in rockfall engineering. The three basic stages of rockfalls are considered: the triggering stage, the motion stage, and the interaction with a structure stage; along with contributions including structural characterization of cliffs, remote monitoring, stability analysis, boulder propagation, design of protection structures an risk assessment. Academic contributions are illustrated by practical examples, and completed by engineering contributions where practical purposes are thoroughly considered. This title is intended for engineers, students as well as researchers.
Download or read book Rock Mechanics written by Barry H. G. Brady and published by Springer Science & Business Media. This book was released on 1993 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although Rock Mechanics addresses many of the rock mechanics issues which arise in underground mining engineering, it is not a text exclusively for mining applications. It consists of five categories of topics on the science and practice of rock engineering: basic engineering principles relevant to rock mechanics; mechanical properties of rock and rock masses; design of underground excavations in various rock mass conditions; mining methods and their implementation; and guidelines on rock mechanics practice. Throughout the text, and particularly in those sections concerned with excavation design and design of mining layouts, reference is made to computational methods of analysis of stress and displacement in a rock mass. The principles of various computational schemes, such as boundary element, finite element and distinct element methods, are considered. This new edition has been completely revised to reflect the notable innovations in mining engineering and the remarkable developments in the science of rock mechanics and the practice of rock engineering that have taken place over the last two decades. Based on extensive professional, research and teaching experience, this book will provide an authoritative and comprehensive text for final year undergraduates and commencing postgraduate students. For professional practitioners, not only will it be of interest to mining and geological engineers but also to civil engineers, structural and mining geologists and geophysicists as a standard work for professional reference purposes. B.H.G. Brady is Emeritus Professor and former Dean of the Faculty of Engineering, Computing and Mathematics at The University of Western Australia, and a consulting rock mechanics engineer. E.T. Brown is Senior Consultant, Golder Associates Pty Ltd, Brisbane, Australia and formerly Senior Deputy Vice-Chancellor of The University of Queensland, Australia.
Download or read book Fundamentals of Discrete Element Methods for Rock Engineering Theory and Applications written by Lanru Jing and published by Elsevier. This book was released on 2007-07-18 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents some fundamental concepts behind the basic theories and tools of discrete element methods (DEM), its historical development, and its wide scope of applications in geology, geophysics and rock engineering. Unlike almost all books available on the general subject of DEM, this book includes coverage of both explicit and implicit DEM approaches, namely the Distinct Element Methods and Discontinuous Deformation Analysis (DDA) for both rigid and deformable blocks and particle systems, and also the Discrete Fracture Network (DFN) approach for fluid flow and solute transport simulations. The latter is actually also a discrete approach of importance for rock mechanics and rock engineering. In addition, brief introductions to some alternative approaches are also provided, such as percolation theory and Cosserat micromechanics equivalence to particle systems, which often appear hand-in-hand with the DEM in the literature. Fundamentals of the particle mechanics approach using DEM for granular media is also presented. · Presents the fundamental concepts of the discrete models for fractured rocks, including constitutive models of rock fractures and rock masses for stress, deformation and fluid flow · Provides a comprehensive presentation on discrete element methods, including distinct elements, discontinuous deformation analysis, discrete fracture networks, particle mechanics and Cosserat representation of granular media · Features constitutive models of rock fractures and fracture system characterization methods detaiing their significant impacts on the performance and uncertainty of the DEM models
