Download or read book Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections written by Siu-Lai Chan and published by Elsevier. This book was released on 2000-05-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.
Download or read book Analysis of Three dimensional Steel Frames with Semi rigid Connections written by Shang-Hsien Hsieh and published by . This book was released on 1990 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Analysis for Semi rigid Frame Design written by Wai-Fah Chen and published by World Scientific. This book was released on 2000 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the recent progress in practical analysis for semi-rigid frame design in North America. This encompasses codes, databases, modeling, classification, analysis/design, and design tables and aids. Practical design methods include LRFD procedures, approximate procedures, computer-based procedures and the optimization process. The book can be used as a supplementary steel design textbook for graduate students, as a training book for a short course in steel design for practicing engineers, and as a reference book for consulting firms designing building structures.
Download or read book Semi rigid Connections Handbook written by Wai-Fah Chen and published by J. Ross Publishing. This book was released on 2011 with total page 1263 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and accessible introduction to the implementation of partially restrained connections in engineering practice.
Download or read book Stability Design of Steel Frames written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-08-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability Design of Steel Frames provides a summary of the behavior, analysis and design of structural steel members and frames with flexibly-jointed connections. The book presents the theory and design of structural stability and includes extensions of computer-based analyses for individual members in space with imperfections. It also shows how connection flexibility influences the behavior and design of steel frames and how designers must consider this in a limit-state analysis and design procedure. The clearly written text and extensive bibliography make this a practical book for advanced students, researchers and professionals in civil and structural engineering, as well as a useful supplement to traditional books on the theory and design of structural stability.
Download or read book Stability Design of Semi Rigid Frames written by W. F. Chen and published by John Wiley & Sons. This book was released on 1995-12-12 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semi-rigid steel frames are revolutionizing structural design. This book is a practical professional reference, covering analytical methods for the evaluation of connection flexibility and its influence on the stability of the entire framework. The methods range from a simplified member-by-member design approach to a more sophisticated computer-based advanced analysis and design approach.
Download or read book Advanced Analysis of Steel Frames written by W.F. Chen and published by CRC Press. This book was released on 2018-01-18 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the limit state approach to design in recent years has focused particular attention on two basic requirements: accurate information regarding the behavior of structures throughout the entire range of loading up to the ultimate strength, and simple practical procedures to enable engineers to assess this behavior. This book satisfies these requirements by providing practical analysis methods for the design of steel frames. The book contains a wide range of second-order analyses: from elastic to inelastic, rigid to semi-rigid connections, and simple plastic hinge method to sophisticated plastic-zone method. Computer programs for each analysis are provided in the form of a floppy disk for easy implementation. Sample problems are described and user's manuals are well documented for each program developed in the book.
Download or read book ICSCEA 2019 written by J. N. Reddy and published by Springer Nature. This book was released on 2020-07-27 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Sustainable Civil Engineering and Architecture 2019, which was held in Ho Chi Minh City, Vietnam, from 24–26 October 2019. The conference brought together international experts from both academia and industry to share their knowledge and experiences, and to facilitate collaboration and improve cooperation in the field. The book highlights the latest advances in sustainable architecture and civil engineering, covering topics such as offshore structures, structural engineering, construction materials, and architecture.
Download or read book Structural Stability written by Wai-Kai Chen and published by Prentice Hall. This book was released on 1987 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Stability: Theory and Implementation is a practical work that provides engineers and students in structural engineering or structured mechanics with the background needed to make the transition from fundamental theory to practical design rules and computer implementation. Beginning with the basic principles of structural stability and basic governing equations, Structural Stability is a concise and comprehensive introduction that applies the principles and theory of structural stability (which are the basis for structural steel design) to the solution of practical building frame design problems. Special features include: modern theories of structural stability of members and frames, and a discussion of how these theories may be utilized to provide design rules and calculation techniques for design important governing equations and the classical solutions used in design processes examples of analytical and numerical methods selected as the most useful and practically applicable methods available detailed information on the stability design rules of the 1986 AISC/LRFD Specifications for the design, fabrication, and erection of structural steel for buildings dual units (SI and English) with most of the material presented in a non-dimensional format fully worked examples, end-of-chapter problems, answers to selected problems, and clear illustrations and tables Am outstandingly practical resource, Structural Stability offers the reader an understanding of the fundamental principles and theory of structural stability not only in an idealized, perfectly elastic system, but also in an inelastic, imperfect system representative of the actual structural systems encountered in engineering practice.
Download or read book Recent Advances in Structural Engineering Volume 1 written by A. Rama Mohan Rao and published by Springer. This book was released on 2018-08-01 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.
Download or read book Recent Advances in Optimal Structural Design written by Scott A. Burns and published by ASCE Publications. This book was released on 2002-01-01 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sponsored by the Technical Committee on Structural Design of the Technical Administrative Committee on Analysis and Computation of the Technical Activities Division of the Structural Engineering Institute of ASCE. This report documents the dramatic new developments in the field of structural optimization over the last two decades. Changes in both computational techniques and applications can be seen by developments in computational methods and solution algorithms, the role of optimization during the various stages of structural design, and the stochastic nature of design in relation to structural optimization. Topics include: Ømethods for discrete variable structural optimization; Ødecomposition methods in structural optimization; Østate of the art on the use of genetic algorithms in design of steel structures; Øconceptual design optimization of engineering structures; Øtopology and geometry optimization of trusses and frames; Øevolutionary structural optimization; Ødesign and optimization of semi-rigid framed structures; Øoptimized performance-based design for buildings; Ømulti-objective optimum design of seismic-resistant structures; and Øreliability- and cost-oriented optimal bridge maintenance planning. The book concludes with an extensive bibliography of journal papers on structural optimization published between 1987 and 1999.
Download or read book Steel Composite Structures written by and published by Research Publishing Service. This book was released on 2010 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stability Design of Steel Frames written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-08-30 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability Design of Steel Frames provides a summary of the behavior, analysis and design of structural steel members and frames with flexibly-jointed connections. The book presents the theory and design of structural stability and includes extensions of computer-based analyses for individual members in space with imperfections. It also shows how connection flexibility influences the behavior and design of steel frames and how designers must consider this in a limit-state analysis and design procedure. The clearly written text and extensive bibliography make this a practical book for advanced students, researchers and professionals in civil and structural engineering, as well as a useful supplement to traditional books on the theory and design of structural stability.
Download or read book Guide to Stability Design Criteria for Metal Structures written by Ronald D. Ziemian and published by John Wiley & Sons. This book was released on 2010-02-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to stability design criteria, fully updated and incorporating current research Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability. Under the editorship of Ronald Ziemian and written by SSRC task group members who are leading experts in structural stability theory and research, this Sixth Edition brings this foundational work in line with current practice and research. The Sixth Edition incorporates a decade of progress in the field since the previous edition, with new features including: Updated chapters on beams, beam-columns, bracing, plates, box girders, and curved girders. Significantly revised chapters on columns, plates, composite columns and structural systems, frame stability, and arches Fully rewritten chapters on thin-walled (cold-formed) metal structural members, stability under seismic loading, and stability analysis by finite element methods State-of-the-art coverage of many topics such as shear walls, concrete filled tubes, direct strength member design method, behavior of arches, direct analysis method, structural integrity and disproportionate collapse resistance, and inelastic seismic performance and design recommendations for various moment-resistant and braced steel frames Complete with over 350 illustrations, plus references and technical memoranda, the Guide to Stability Design Criteria for Metal Structures, Sixth Edition offers detailed guidance and background on design specifications, codes, and standards worldwide.
Download or read book Behaviour of Steel Structures in Seismic Areas written by Federico Mazzolani and published by CRC Press. This book was released on 2009-12-03 with total page 1667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Behaviour of Steel Structures in Seismic Areas comprises the latest progress in both theoretical and experimental research on the behaviour of steel structures in seismic areas. The book presents the most recent trends in the field of steel structures in seismic areas, with particular reference to the utilisation of multi-level performance bas
Download or read book Life Cycle Civil Engineering written by Fabio Biondini and published by CRC Press. This book was released on 2008-05-28 with total page 996 pages. Available in PDF, EPUB and Kindle. Book excerpt: Life-Cycle Civil Engineering contains the papers presented at the First International Symposium on Life-Cycle Civil Engineering (IALCCE 08), held in Villa Monastero, Varenna, Lake Como, Italy, 10-14 June, 2008. It consists of a book and a CD-ROM containing 150 papers, including eight keynote papers and 142 technical contributions from 28 countries.
Download or read book Design Fabrication and Economy of Metal Structures written by Károly Jármai and published by Springer Science & Business Media. This book was released on 2013-03-15 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the International Conference on Design, Fabrication and Economy of Metal Structures held on 24-26 April 2013 in Miskolc, Hungary which contain 99 papers covering: Structural optimization Thin-walled structures Stability Fatigue Frames Fire Fabrication Welding technology Applications Steel-concrete composite Special problems The authors are from 23 different countries, ensuring that the themes covered are of worldwide interest and importance. The International Institute of Welding (IIW), the International Society of Structural and Multidisciplinary Optimization (ISSMO), the TÁMOP 4.2.1.B-10/2/KONV-2010-0001 project entitled “Increasing the quality of higher education through the development of research - development and innovation program at the University of Miskolc supported by the European Union, co-financed by the European Social Fund” and many other sponsors helped organizers to collect these valuable studies, the results of which will provoke discussion, and provide an important reference for civil and mechanical engineers, architects, researchers and structural designers and fabricators, as well as managers in a range of industries including building, transport, shipbuilding, aircraft, chemical and offshore engineering.
