Download or read book Subsynchronous Resonance in Power Systems written by Paul M. Anderson and published by John Wiley & Sons. This book was released on 1999-02-02 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical calculations for subsynchronous system modeling Subsynchronous Resonance in Power Systems provides in-depth guidance toward the parameters, modeling, and analysis of this complex subclass of power systems. Emphasizing field testing to determine the data required, this book facilitates thorough and efficient oscillation and damping modeling using eigenvalues of a system's linear model. Expert discussion provides step-by-step instruction for generator, network, and turbine-generator shaft models, followed by detailed tutorials for model testing and analysis based on IEEE, CORPALS, and SSR eigenvalue analysis. Comprehensive in scope and practical in focus, this book is an invaluable resource for anyone working with frequencies below 60 Hz.
Download or read book Analysis of Subsynchronous Resonance in Power Systems written by K.R. Padiyar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: 4. 2 Analysis of induction generator effect: frequency scanning method 83 4. 3 Analysis of torsional interaction(TI) 87 4. 4 State equations and eigenvalue analysis 96 4. 5 An algorithm for computing torsional modes 108 4. 6 Countermeasures for SSR III 4. 7 Torsional oscillations in parallel connected turbine generators 120 121 5. INTERACTIONS WITH POWER SYSTEM STABILIZER 5. 1 Introduction 121 5. 2 Basic concept in the application of PSS 122 5. 3 Design of PSS 126 5. 4 Torsional interaction with PSS 130 5. 5 A case study 132 6. INTERACTIONS WITH HVDC CONVERTER CONTROL 137 6. 1 Introduction 137 6. 2 HVDC converters and control 138 6. 3 Modelling of HVDC system for study of torsional interactions 147 6. 4 Analysis of torsional interactions -A simplified approach 153 6. 5 A case study 156 6. 6 A simplified damping torque analysis 161 6. 7 Control of torsional interaction 167 7. INTERACTIONS WITH SHUNT COMPENSATORS 169 7. 1 Introduction 169 7. 2 Static Var Compensator 171 7 . 3 Torsional Interactions with SVC 186 7. 4 Static Condenser(STATCON) 189 7. 5 Torsional interactions with STATCON 196 7. 6 A simplified analysis of torsional interaction with voltage controller 200 8. INTERACTIONS WITH SERIES COMPENSATORS 205 8. 1 Introduction 205 8. 2 Thyristor Controlled Series Compensator 206 8. 3 Modelling of TCSC for SSR studies 216 8. 4 Mitigation of SSR with TCSC 223 8. 5 Static Synchronous Series Compensator (SSSC) 229 8.
Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.
Download or read book Analysis and Damping Control of Power System Low frequency Oscillations written by Haifeng Wang and published by Springer. This book was released on 2016-03-30 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research and development results on power systems oscillations in three categories of analytical methods. First is damping torque analysis which was proposed in 1960’s, further developed between 1980-1990, and widely used in industry. Second is modal analysis which developed between the 1980’s and 1990’s as the most powerful method. Finally the linearized equal-area criterion analysis that is proposed and developed recently. The book covers three main types of controllers: Power System Stabilizer (PSS), FACTS (Flexible AC Transmission Systems) stabilizer, and ESS (Energy Storage Systems) stabilizer. The book provides a systematic and detailed introduction on the subject as the reference for industry applications and academic research.
Download or read book Risk Based Assessment of Subsynchronous Resonance in AC DC Systems written by Atia Adrees and published by Springer. This book was released on 2016-10-04 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This relevant and timely thesis presents the pioneering use of risk-based assessment tools to analyse the interaction between electrical and mechanical systems in mixed AC/DC power networks at subsynchronous frequencies. It also discusses assessing the effect of uncertainties in the mechanical parameters of a turbine generator on SSR in a meshed network with both symmetrical and asymmetrical compensation systems. The research presented has resulted in 12 publications including three top international journal papers (IEEE Transactions on Power Systems) and nine international conference publications, including two award-winning papers.
Download or read book Modeling and Analysis of Doubly Fed Induction Generator Wind Energy Systems written by Lingling Fan and published by Academic Press. This book was released on 2015-04-16 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind Energy Systems: Modeling, Analysis and Control with DFIG provides key information on machine/converter modelling strategies based on space vectors, complex vector, and further frequency-domain variables. It includes applications that focus on wind energy grid integration, with analysis and control explanations with examples. For those working in the field of wind energy integration examining the potential risk of stability is key, this edition looks at how wind energy is modelled, what kind of control systems are adopted, how it interacts with the grid, as well as suitable study approaches. Not only giving principles behind the dynamics of wind energy grid integration system, but also examining different strategies for analysis, such as frequency-domain-based and state-space-based approaches. - Focuses on real and reactive power control - Supported by PSCAD and Matlab/Simulink examples - Considers the difference in control objectives between ac drive systems and grid integration systems
Download or read book Advanced technologies for planning and operation of prosumer energy systems written by Bin Zhou and published by Frontiers Media SA. This book was released on 2023-04-28 with total page 1092 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transient Analysis of Power Systems written by Juan A. Martinez-Velasco and published by John Wiley & Sons. This book was released on 2020-02-10 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on introduction to advanced applications of power system transients with practical examples Transient Analysis of Power Systems: A Practical Approach offers an authoritative guide to the traditional capabilities and the new software and hardware approaches that can be used to carry out transient studies and make possible new and more complex research. The book explores a wide range of topics from an introduction to the subject to a review of the many advanced applications, involving the creation of custom-made models and tools and the application of multicore environments for advanced studies. The authors cover the general aspects of the transient analysis such as modelling guidelines, solution techniques and capabilities of a transient tool. The book also explores the usual application of a transient tool including over-voltages, power quality studies and simulation of power electronics devices. In addition, it contains an introduction to the transient analysis using the ATP. All the studies are supported by practical examples and simulation results. This important book: Summarises modelling guidelines and solution techniques used in transient analysis of power systems Provides a collection of practical examples with a detailed introduction and a discussion of results Includes a collection of case studies that illustrate how a simulation tool can be used for building environments that can be applied to both analysis and design of power systems Offers guidelines for building custom-made models and libraries of modules, supported by some practical examples Facilitates application of a transients tool to fields hardly covered with other time-domain simulation tools Includes a companion website with data (input) files of examples presented, case studies and power point presentations used to support cases studies Written for EMTP users, electrical engineers, Transient Analysis of Power Systems is a hands-on and practical guide to advanced applications of power system transients that includes a range of practical examples.
Download or read book Power Plants and Power Systems Control 2003 written by Kwang Y Lee and published by Elsevier. This book was released on 2004-04 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power Systems Modelling and Fault Analysis written by Nasser Tleis and published by Elsevier. This book was released on 2007-11-30 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive practical treatment of the modelling of electrical power systems, and the theory and practice of fault analysis of power systems covering detailed and advanced theories as well as modern industry practices.The continuity and quality of electricity delivered safely and economically by today's and future's electrical power networks are important for both developed and developing economies. The correct modelling of power system equipment and correct fault analysis of electrical networks are pre-requisite to ensuring safety and they play a critical role in the identification of economic network investments. Environmental and economic factors require engineers to maximise the use of existing assets which in turn require accurate modelling and analysis techniques. The technology described in this book will always be required for the safe and economic design and operation of electrical power systems. The book describes relevant advances in industry such as in the areas of international standards developments, emerging new generation technologies such as wind turbine generators, fault current limiters, multi-phase fault analysis, measurement of equipment parameters, probabilistic short-circuit analysis and electrical interference.*A fully up-to-date guide to the analysis and practical troubleshooting of short-circuit faults in electricity utilities and industrial power systems*Covers generators, transformers, substations, overhead power lines and industrial systems with a focus on best-practice techniques, safety issues, power system planning and economics*North American and British / European standards covered
Download or read book Electrical Power Systems and Computers written by Xiaofeng Wan and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes extended and revised versions of a set of selected papers from the International Conference on Electric and Electronics (EEIC 2011) , held on June 20-22 , 2011, which is jointly organized by Nanchang University, Springer, and IEEE IAS Nanchang Chapter. The objective of EEIC 2011 Volume 3 is to provide a major interdisciplinary forum for the presentation of new approaches from Electrical Power Systems and Computers, to foster integration of the latest developments in scientific research. 133 related topic papers were selected into this volume. All the papers were reviewed by 2 program committee members and selected by the volume editor Prof. Xiaofeng Wan. We hope every participant can have a good opportunity to exchange their research ideas and results and to discuss the state of the art in the areas of the Electrical Power Systems and Computers.
Download or read book Analysis of Subsynchronous Resonance in Power Systems written by K.R. Padiyar and published by Springer Science & Business Media. This book was released on 1999 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents comprehensive mathematical models of turbine-generators, HVDC and FACTS controllers, and small signal analysis of SSR. The emphasis is on the analysis using linearized models. Both damping torque and eigenvalue analysis are covered. Also included are the basic concepts of SSR interactions with fixed series compensation, PSS, HVDC, and FACTS controllers. Timely treatment has been given to the development of electrical analogue for the rotor system, the derivation of the network equations based on circuit topology and immittance functions using D-Q variables. The material is supported by several illustrative examples and case studies based on IEEE benchmark models. Analysis of Subsynchronous Resonance in Power Systems is an invaluable reference work for power systems researchers, system planners, and designers.
Download or read book Power System Dynamics written by Jan Machowski and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 885 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to the most up-to-date information on power system dynamics The revised third edition of Power System Dynamics and Stability contains a comprehensive, state-of-the-art review of information on the topic. The third edition continues the successful approach of the first and second editions by progressing from simplicity to complexity. It places the emphasis first on understanding the underlying physical principles before proceeding to more complex models and algorithms. The book is illustrated by a large number of diagrams and examples. The third edition of Power System Dynamics and Stability explores the influence of wind farms and virtual power plants, power plants inertia and control strategy on power system stability. The authors—noted experts on the topic—cover a range of new and expanded topics including: Wide-area monitoring and control systems. Improvement of power system stability by optimization of control systems parameters. Impact of renewable energy sources on power system dynamics. The role of power system stability in planning of power system operation and transmission network expansion. Real regulators of synchronous generators and field tests. Selectivity of power system protections at power swings in power system. Criteria for switching operations in transmission networks. Influence of automatic control of a tap changing step-up transformer on the power capability area of the generating unit. Mathematical models of power system components such as HVDC links, wind and photovoltaic power plants. Data of sample (benchmark) test systems. Power System Dynamics: Stability and Control, Third Edition is an essential resource for students of electrical engineering and for practicing engineers and researchers who need the most current information available on the topic.
Download or read book Proceedings of the Eighth Power Systems Computation Conference written by Committee 8th Pwr Sys Comp Conf and published by Butterworth-Heinemann. This book was released on 2014-05-20 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the Eighth Power Systems Computation Conference
Download or read book Robust Control in Power Systems written by Bikash Pal and published by Springer Science & Business Media. This book was released on 2006-07-02 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust Control in Power Systems deals with the applications of new techniques in linear system theory to control low frequency oscillations in power systems. The book specifically focuses on the analysis and damping of inter-area oscillations in the systems which are in the range of 0.2-1 Hz. The damping control action is injected through high power electronic devices known as flexible AC transmission system (FACTS) controllers. Three commonly used FACTS controllers: controllable series capacitors (CSCs) controllable phase shifters (CPSs) and static var compensators (SVCs) have been used in this book to control the inter-area oscillations. The overview of linear system theory from the perspective of power system control is explained through examples. The damping control design is formulated as norm optimization problem. The H_infinity, H2 norm of properly defined transfer functions are minimized in linear matrix inequalities (LMI) framework to obtain desired performance and stability robustness. Both centralized and decentralized control structures are used. Usually the transmission of feedback signal from a remote location encounters delays making it difficult to control the system. Smith predictor based approach has been successfully explored in this book as a solution to such a problem. Robust Control in Power Systems will be valuable to academicians in the areas of power, control and system theory, as well as professionals in the power industry.
Download or read book Power System Coherency and Model Reduction written by Joe H. Chow and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Power System Coherency and Model Reduction" provides a comprehensive treatment for understanding interarea modes in large power systems and obtaining reduced-order models using the coherency concept and selective modal analysis method. Both linear and nonlinear analysis methods are covered. This is a reference book for researchers interested in interarea oscillations and model reduction, and power engineers in developing reduced models for power system studies and control design.
Download or read book Unified Power Flow Controller Technology and Application written by Jijun Yin and published by Academic Press. This book was released on 2017-06-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unified Power Flow Controller Technology and Application provides comprehensive coverage on UPFC technology, providing a range of topics, including design principle, control and protection, and insulation coordination. It summarizes all the most up-to-date research and practical achievements that are related to UPFC and MMC technology, including test techniques for main components, closed-loop test techniques for control and protection systems, and onsite techniques for implementing UPFC projects. The book is an essential reference book for both academics and engineers working in power system protection control, power system planning engineers, and HVDC FACTS related areas. Readers will not only obtain the detailed information regarding theoretical analysis and practical application of UPFC, but also the control mechanism of advanced MMC technology, both of which are not common topics in previously published books. - Shows how to use modular multilevel converters (MMC) to implement UPFC that lead to cost-effective and reliable systems - Draws from the most up-to-date research and practical applications - Teaches electromechanical/electromagnetic transient simulation techniques and real-time closed-loop simulation test techniques of the MMC based UPFC