Download or read book Analysis of Single Concrete Anchors with Deep Embedments Loaded in Tension written by Kurt W. Krauss and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Reports the tests of 44 concrete anchors varying in type, including cast-in-place anchors, post-installed mechanical anchors, and post-installed epoxy anchors and the design, construction, and concrete characteristics of the two slabs used for testing.
Download or read book Test Report of Single Anchors with Deep Embedments 8 to 16 Inches Loaded in Tension written by Kurt W. Krauss and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this jOint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 40 (thesis year 1995) a total of 10,746 thesis titles from 19 Canadian and 144 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 40 reports theses submitted in 1995, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.
Download or read book Design of anchorages in concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011-01-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Download or read book Post Installed Anchors written by Geraldine S. Cheok and published by Forgotten Books. This book was released on 2017-10-29 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Post-Installed Anchors: A Literature Review Summary and conclusions General Summary of Findings Concrete Compressive Strength Anchor Preload Cyclic Loading Embedment Depth Cracked Concrete Anchor Capacity Tension Loading. Shear Loading Combined Loading Transverse Reinforcement Conclusions. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book ACI Structural Journal written by and published by . This book was released on 2009 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchors in Concrete design and Behavior written by George A. Senkiw and published by . This book was released on 1991 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2008 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.
Download or read book ACI Manual of Concrete Practice written by American Concrete Institute and published by . This book was released on 2007 with total page 1196 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Adhesive Anchors in Concrete Under Sustained Loading Conditions written by Ronald A. Cook and published by Transportation Research Board National Research. This book was released on 2009 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explores a test method designed to help determine an adhesive anchor's ability to resist sustained tensile loads.
Download or read book Guide to the Concrete Capacity Design CCD Method written by ACI Committee 349 and published by . This book was released on 2007 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Abstracts written by and published by . This book was released on 1987 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analyzing the Failure Mechanisms and Developing Strength Prediction Models for Concrete Expansion and Screw Anchors In Tension written by Zhao Chen and published by . This book was released on 2018 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete anchors serve as the connections between structural elements in various applications in concrete structures. This dissertation focused on investigating two popular post-installed mechanical anchors, torque-controlled expansion (TCE) anchors and screw anchors, and their common failure modes. TCE anchors commonly fail in a Pull-through mode when installed at deep effective embedment depths (hef). Screw anchors typically fail in a Combined mode of Pull-out and Concrete breakout modes. However, research on these failure modes are scarce and no design model is available to predict the ultimate tensile strength (Nu) of these failure modes in the current design codes. A total of 128 tension tests on TCE anchors from 3 manufacturers in 3 diameters were tested in 2 hef per diameter. Both failure modes and Nu are found dependent on hef and diameter. Using ABAQUS, finite element models (FEM)s of TCE anchors were developed and matched well with the test results regarding failure modes, load-displacement behavior, and ultimate strength. Total of 144 tension tests on screw anchors from 3 manufacturers in 3 diameters and 2 hef per diameter were conducted. Approximately 80% of the tested anchors failed in the Combined mode and Ncomb was found linearly correlated to hef 1.3 but slightly dependent on anchor diameter. FEMs were also developed for screw anchors. Combine failure mode was observed for both deep and shallow embedment depths. Good agreements were found in load-displacement behavior and Ncomb between FEMs and test results. Based on parametric studies using additional FEM simulations, prediction models for predicting Nu of the pull-through mode of TCE anchors and Combined mode of screw anchors, individually, was developed and showed good agreements with the test results. Post-installed anchors are frequently installed with abandoned drilled hole (ADH)s at the job site. Total of 60 TCE anchors were tested at two scenarios of hole conditions: 1) reference (no hole), and 2) one ADH drilled at 2xd offset. The ADH scenario resulted in (~4.5-21%) reduction in Nu, regardless of the failure mode, and the percent reductions decreased as diameter and/or hef increased. An area method was developed to predict the reduced Nu in the ADH scenario.
Download or read book Fastenings to Concrete and Masonry Structures written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern fastening techniques are increasingly being used to transfer loads into concrete and masonry structures. This book aims to compile and compare research on the behaviour of fastening systems. It also proposes an approach to the design of fastenings based on empirical and theoretical models.
Download or read book Determination of Minimum Embedment Depth for Polyester Resin Capsule Anchors Securing Bridge mounted Signs written by John P. Dusel and published by . This book was released on 1985 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NEHRP Recommended Provisions National Earthquake Hazards Reduction Program for Seismic Regulations for New Buildings and Other Structures Provisions written by United States. Federal Emergency Management Agency and published by . This book was released on 2001 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:
