Download or read book Analysis of Fuel Injection System for Internal Combustion Engine by Computer Simulation written by Talha Firoz and published by . This book was released on 2007 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engine Modeling and Simulation written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-16 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the simulation and modeling of internal combustion engines. The contents include various aspects of diesel and gasoline engine modeling and simulation such as spray, combustion, ignition, in-cylinder phenomena, emissions, exhaust heat recovery. It also explored engine models and analysis of cylinder bore piston stresses and temperature effects. This book includes recent literature and focuses on current modeling and simulation trends for internal combustion engines. Readers will gain knowledge about engine process simulation and modeling, helpful for the development of efficient and emission-free engines. A few chapters highlight the review of state-of-the-art models for spray, combustion, and emissions, focusing on the theory, models, and their applications from an engine point of view. This volume would be of interest to professionals, post-graduate students involved in alternative fuels, IC engines, engine modeling and simulation, and environmental research.
Download or read book Analysis of Injection Processes in an Innovative 3D CFD Tool for the Simulation of Internal Combustion Engines written by Marlene Wentsch and published by Springer. This book was released on 2018-05-16 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the large number of influencing parameters and interactions, the fuel injection and therewith fuel propagation and distribution are among the most complex processes in an internal combustion engine. For this reason, injection is usually the subject to highly detailed numerical modeling, which leads to unacceptably high computing times in the 3D-CFD simulation of a full engine domain. Marlene Wentsch presents a critical analysis, optimization and extension of injection modeling in an innovative, fast response 3D-CFD tool that is exclusively dedicated to the virtual development of internal combustion engines. About the Author Marlene Wentsch works as research associate in the field of 3D-CFD simulations of injection processes at the Institute of Internal Combustion Engines and Automotive Engineering (IVK), University of Stuttgart, Germany.
Download or read book Simulation and Optimization of Internal Combustion Engines written by Zhiyu Han and published by SAE International. This book was released on 2021-12-28 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation and Optimization of Internal Combustion Engines provides the fundamentals and up-to-date progress in multidimensional simulation and optimization of internal combustion engines. While it is impossible to include all the models in a single book, this book intends to introduce the pioneer and/or the often-used models and the physics behind them providing readers with ready-to-use knowledge. Key issues, useful modeling methodology and techniques, as well as instructive results, are discussed through examples. Readers will understand the fundamentals of these examples and be inspired to explore new ideas and means for better solutions in their studies and work. Topics include combustion basis of IC engines, mathematical descriptions of reactive flow with sprays, engine in-cylinder turbulence, fuel sprays, combustions and pollutant emissions, optimization of direct-injection gasoline engines, and optimization of diesel and alternative fuel engines.
Download or read book Fuel Injection written by Daniela Siano and published by BoD – Books on Demand. This book was released on 2010-08-17 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Injection is a key process characterizing the combustion development within Internal Combustion Engines (ICEs) and in many other industrial applications. State of the art in the research and development of modern fuel injection systems are presented in this book. It consists of 12 chapters focused on both numerical and experimental techniques, allowing its proper design and optimization.
Download or read book Modeling Engine Spray and Combustion Processes written by Gunnar Stiesch and published by Springer Science & Business Media. This book was released on 2003-04-10 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of mathematical models to numerically describe the performance of internal combustion engines is of great significance in the development of new and improved engines. Today, such simulation models can already be viewed as standard tools, and their importance is likely to increase further as available com puter power is expected to increase and the predictive quality of the models is constantly enhanced. This book describes and discusses the most widely used mathematical models for in-cylinder spray and combustion processes, which are the most important subprocesses affecting engine fuel consumption and pollutant emissions. The relevant thermodynamic, fluid dynamic and chemical principles are summarized, and then the application of these principles to the in-cylinder processes is ex plained. Different modeling approaches for the each subprocesses are compared and discussed with respect to the governing model assumptions and simplifica tions. Conclusions are drawn as to which model approach is appropriate for a specific type of problem in the development process of an engine. Hence, this book may serve both as a graduate level textbook for combustion engineering stu dents and as a reference for professionals employed in the field of combustion en gine modeling. The research necessary for this book was carried out during my employment as a postdoctoral scientist at the Institute of Technical Combustion (ITV) at the Uni versity of Hannover, Germany and at the Engine Research Center (ERC) at the University of Wisconsin-Madison, USA.
Download or read book A Simulation technique for the fuel injection system of diesel engines AES Vol 24 Thermodynamics and energy systems fundamentals educaton and computer aided analysis written by D.A. Kouremenos and published by . This book was released on 1991 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fuel Injection and Emission in Two Stroke Engines written by Wadysaw Mitianiec and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.
Download or read book Fuel Systems for IC Engines written by Institution of Mechanical Engineers and published by Elsevier. This book was released on 2012-03-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the papers from the latest conference in this successful series on fuel injection systems for internal combustion engines. It is vital for the automotive industry to continue to meet the demands of the modern environmental agenda. In order to excel, manufacturers must research and develop fuel systems that guarantee the best engine performance, ensuring minimal emissions and maximum profit. The papers from this unique conference focus on the latest technology for state-of-the-art system design, characterisation, measurement, and modelling, addressing all technological aspects of diesel and gasoline fuel injection systems. Topics range from fundamental fuel spray theory, component design, to effects on engine performance, fuel economy and emissions. - Presents the papers from the IMechE conference on fuel injection systems for internal combustion engines - Papers focus on the latest technology for state-of-the-art system design, characterisation, measurement and modelling; addressing all technological aspects of diesel and gasoline fuel injection systems - Topics range from fundamental fuel spray theory and component design to effects on engine performance, fuel economy and emissions
Download or read book Diesel Fuel Injection System Simulation written by Jukka Kiijärvi and published by . This book was released on 2003 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbocharging the Internal Combustion Engine written by Neil Watson and published by . This book was released on 1982 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Injection in Automotive Engineering written by Kazimierz Lejda and published by BoD – Books on Demand. This book was released on 2012-04-20 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main topic of "Fuel injection in automotive engineering" book is fundamental process that determines the development of internal combustion engines and performances of automotive vehicles. The book collects original works focused on up-to-date issues relevant to improving injection phenomena per se and injection systems as the engine key components.
Download or read book Detailed Modeling of SI Engines in Fuel Consumption Simulations for Functional Analysis written by Manuel Dorsch and published by Logos Verlag Berlin. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this thesis is to establish a coupled modeling approach to simulate fuel consumption and in-cylinder gas emissions of a passenger car in various driving cycles (NEDC, RDE, WLTP). Combining models of the engine control unit and the mechanical vehicle powertrain with a crank-angle based combustion engine simulation opens up the possibility to support the development and calibration of future engines, demonstrated here for a turbo-charged spark ignited engine with direct injection and a fully-variable valvetrain. Thermodynamic processes are implemented within a 1D gas exchange model which allows to consider not only steady-state but also transient engine operation. The coupled system is extended by calculations of engine-out emissions considering the formation of nitrogen oxide (NOx), carbon monoxide (CO), and hydrocarbons (HC). Furthermore, tailpipe emissions are determined in an additional simulation model. The successful validation of this complex coupling technique is presented with exemplary results from all stages of the validation process. Finally, the advantage of this simulation methodology is shown by several application examples demonstrating the attained capabilities.
Download or read book Introduction to Modeling and Control of Internal Combustion Engine Systems written by Lino Guzzella and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal combustion engines still have a potential for substantial improvements, particularly with regard to fuel efficiency and environmental compatibility. These goals can be achieved with help of control systems. Modeling and Control of Internal Combustion Engines (ICE) addresses these issues by offering an introduction to cost-effective model-based control system design for ICE. The primary emphasis is put on the ICE and its auxiliary devices. Mathematical models for these processes are developed in the text and selected feedforward and feedback control problems are discussed. The appendix contains a summary of the most important controller analysis and design methods, and a case study that analyzes a simplified idle-speed control problem. The book is written for students interested in the design of classical and novel ICE control systems.
Download or read book Computer Simulation of an Aircraft Engine Fuel Injection System written by David D. Hester and published by . This book was released on 1978 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this report was to develop an analytical model of the fuel system to provide a basis for quantitatively exploring deficiencies in the system response which lead to poor exhaust emission characteristics. A computer model of the fuel system was developed based on component testing and found to give accurate predictions for pressures and flow rates within the system. The model has been used to investigate modifications to the system for improved fuel management and reduced exhaust emissions. The effect of improved fuel management on engine exhaust emissions was evaluated.
Download or read book Computer simulation of the diesel fuel injection system written by Milan Marčič and published by . This book was released on 1985 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics based Reduced order Modeling of Fuel Injection and Combustion Processes in Internal Combustion Engines written by Abhishek Y. Deshmukh and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
