Download or read book Analysis of Boundary Element Methods for Wave Propagation in Porous Media written by Peter Urthaler and published by . This book was released on 2012 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wave Propagation Analysis with Boundary Element Method written by Chiara Guardasoni and published by Ledizioni. This book was released on 2010 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave propagation analysis with boundary element method.
Download or read book Wave Propagation in Viscoelastic and Poroelastic Continua written by Martin Schanz and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wave propagation is an important topic in engineering sciences, especially, in the field of solid mechanics. A description of wave propagation phenomena is given by Graff [98]: The effect of a sharply applied, localized disturbance in a medium soon transmits or 'spreads' to other parts of the medium. These effects are familiar to everyone, e.g., transmission of sound in air, the spreading of ripples on a pond of water, or the transmission of radio waves. From all wave types in nature, here, attention is focused only on waves in solids. Thus, solely mechanical disturbances in contrast to electro-magnetic or acoustic disturbances are considered. of waves - the compression wave similar to the In solids, there are two types pressure wave in fluids and, additionally, the shear wave. Due to continual reflec tions at boundaries and propagation of waves in bounded solids after some time a steady state is reached. Depending on the influence of the inertia terms, this state is governed by a static or dynamic equilibrium in frequency domain. However, if the rate of onset of the load is high compared to the time needed to reach this steady state, wave propagation phenomena have to be considered.
Download or read book Progress in Boundary Element Methods written by BREBBIA and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: A substantial amount of research on Boundary Elements has taken place since publication of the first Volume of this series. Most of the new work has concentrated on the solution of non-linear and time dependent problems and the development of numerical techniques to increase the efficiency of the method. Chapter 1 of this Volume deals with the solution of non-linear potential problems, for which the diffusivity coefficient is a function of the potential and the boundary conditions are also non-linear. The recent research reported here opens the way for the solution of a: large range of non-homogeneous problems by using a simple transformation which linearizes the governing equations and consequently does not require the use of internal cells. Chapter 2 summarizes the main integral equations for the solution of two-and three dimensional scalar wave propagation problems. This is a type of problem that is well suited to boundary elements but generally gives poor results when solved using finite elements. The problem of fracture mechanics is studied in Chapter 3, where the ad vantages of using boundary integral equations are demonstrated. One of the most interesting features of BEM i~ the possibility of describing the problem only as a function of the boundary unknowns, even in the presence of body, centrifugal and temperature induced forces. Chapter 4 explains how this can be done for two-and three-dimensional elastostatic problems.
Download or read book Porous Media written by Wolfgang Ehlers and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume offers a state-of-the-art report on the various recent sci entific developments in the Theory of Porous Media (TPM) comprehending the basic theoretical concepts in continuum mechanics on porous and mul tiphasic materials as well as the wide range of experimental and numerical applications. Following this, the volume does not only address the sophisti cated reader but also the interested beginner in the area of Porous Media by presenting a collection of articles. These articles written by experts in the field concern the fundamental approaches to multiphasic and porous materials as well as various applications to engineering problems. In many branches of engineering just as in applied natural sciences like bio- and chemomechanics, one often has to deal with continuum mechanical problems which cannot be uniquely classified within the well-known disci plines of either "solid mechanics" or "fluid mechanics". These problems, characterized by the fact that they require a unified treatment of volumetri cally coupled solid-fluid aggregates; basically fall into the categories of either mixtures or porous media. Following this, there is a broad variety of problems ranging in this category as for example the investigation of reacting fluid mix tures or solid-fluid suspensions as well as the investigation of the coupled solid deformation and pore-fluid flow behaviour of liquid- and gas-saturated porous solid skeleton materials like geomaterials (soil, rock, concrete, etc. ), polymeric and metallic foams or biomaterials (hard and soft tissues, etc).
Download or read book Linear and Nonlinear Dynamic Analysis by Boundary Element Method written by Shahid Ahmad and published by . This book was released on 1991 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transient Flow and Dispersion Analysis in Porous Media Using Boundary Element Method written by T. I. Eldho and published by . This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoelasticity written by Witold Nowacki and published by Elsevier. This book was released on 2013-10-22 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelasticity, Second Edition reviews advances in thermoelasticity and covers topics ranging from stationary problems of thermoelasticity to variational theorems of stationary thermoelasticity; stresses due to the action of a discontinuous temperature field in an infinite elastic body; the action of heat sources in the elastic space; and thermal inclusions in an infinite disc and semi-infinite disc. Three different sets of differential equations describing the fields of strain and temperature are presented. This book is comprised of 12 chapters and begins with a discussion on basic relations and equations of thermoelasticity. Thermoelasticity is treated as a synthesis of the theory of elasticity and the theory of heat conduction. Some particular cases of thermoelasticity are then investigated, including stationary problems, the theory of thermal stresses, and classical dynamic elasticity. Dynamic effects due to the action of a non-stationary temperature field are examined, along with plane harmonic waves in an elastic space and thermal stresses in plates, shells, and viscoelastic bodies. The final chapter focuses on micropolar thermoelasticity, magnetothermoelasticity, and thermopiezoelectricity. This monograph will be of interest to physicists and mechanical engineers.
Download or read book Developments in Boundary Element Methods written by P.K. Banerjee and published by CRC Press. This book was released on 2005-12-07 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nine detailed survey chapters by different authors present a number of applications of BEMs.
Download or read book Mechanics of Poroelastic Media written by A.P.S. Selvadurai and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Mechanics of Poroelastic Media the classical theory of poroelasticity developed by Biot is developed and extended to the study of problems in geomechanics, biomechanics, environmental mechanics and materials science. The contributions are grouped into sections covering constitutive modelling, analytical aspects, numerical modelling, and applications to problems. The applications of the classical theory of poroelasticity to a wider class of problems will be of particular interest. The text is a standard reference for researchers interested in developing mathematical models of poroelasticity in geoenvironmental mechanics, and in the application of advanced theories of poroelastic biomaterials to the mechanics of biomaterials.
Download or read book Fast Boundary Element Methods in Engineering and Industrial Applications written by Ulrich Langer and published by Springer Science & Business Media. This book was released on 2012-02-02 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains eight state of the art contributions on mathematical aspects and applications of fast boundary element methods in engineering and industry. This covers the analysis and numerics of boundary integral equations by using differential forms, preconditioning of hp boundary element methods, the application of fast boundary element methods for solving challenging problems in magnetostatics, the simulation of micro electro mechanical systems, and for contact problems in solid mechanics. Other contributions are on recent results on boundary element methods for the solution of transient problems. This book is addressed to researchers, graduate students and practitioners working on and using boundary element methods. All contributions also show the great achievements of interdisciplinary research between mathematicians and engineers, with direct applications in engineering and industry.
Download or read book Boundary Element Methods in Engineering written by Balkrishna S. Annigeri and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Method (BEM) has become established as an effective tool for the solutions of problems in engineering science. The salient features of the BEM have been well documented in the open literature and therefore will not be elaborated here. The BEM research has progressed rapidly, especially in the past decade and continues to evolve worldwide. This Symposium was organized to provide an international forum for presentation of current research in BEM for linear and nonlinear problems in solid and fluid mechanics and related areas. To this end, papers on the following topics were included: rotary wing aerodynamics, unsteady aerodynamics, design and optimization, elasticity, elasto dynamics and elastoplasticity, fracture mechanics, acoustics, diffusion and wave motion, thermal analysis, mathematical aspects and boundary/finite element coupled methods. A special session was devoted to parallel/vector supercomputing with emphasis on mas sive parallelism. This Symposium was sponsored by United Technologies Research Center (UTRC) , NASA Langley Research Center, and the International Association of Boundary Ele ment Methods (lAB EM) . We thank the UTRC management for their permission to host this Symposium. In particular, we thank Dr. Arthur S. Kesten and Mr. Robert E. Olson for their encouragement and support. We gratefully acknowledge the support of Dr. E. Carson Yates, Jr. of NASA Langley, Prof. Luigi Morino, Dr. Thomas A.
Download or read book The Scaled Boundary Finite Element Method written by Chongmin Song and published by John Wiley & Sons. This book was released on 2018-06-19 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: An informative look at the theory, computer implementation, and application of the scaled boundary finite element method This reliable resource, complete with MATLAB, is an easy-to-understand introduction to the fundamental principles of the scaled boundary finite element method. It establishes the theory of the scaled boundary finite element method systematically as a general numerical procedure, providing the reader with a sound knowledge to expand the applications of this method to a broader scope. The book also presents the applications of the scaled boundary finite element to illustrate its salient features and potentials. The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation covers the static and dynamic stress analysis of solids in two and three dimensions. The relevant concepts, theory and modelling issues of the scaled boundary finite element method are discussed and the unique features of the method are highlighted. The applications in computational fracture mechanics are detailed with numerical examples. A unified mesh generation procedure based on quadtree/octree algorithm is described. It also presents examples of fully automatic stress analysis of geometric models in NURBS, STL and digital images. Written in lucid and easy to understand language by the co-inventor of the scaled boundary element method Provides MATLAB as an integral part of the book with the code cross-referenced in the text and the use of the code illustrated by examples Presents new developments in the scaled boundary finite element method with illustrative examples so that readers can appreciate the significant features and potentials of this novel method—especially in emerging technologies such as 3D printing, virtual reality, and digital image-based analysis The Scaled Boundary Finite Element Method: Introduction to Theory and Implementation is an ideal book for researchers, software developers, numerical analysts, and postgraduate students in many fields of engineering and science.
Download or read book Boundary Element Methods written by S. Kobayashi and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Methods (BEM) has become one of the most efficient tools for solving various kinds of problems in engineering science. The International Association for Boundary Element Methods (IABEM) was established in order to promote and facilitate the exchange of scientific ideas related to the theory and applications of boundary element methods. The aim of this symposium is to provide a forum for researchers in boundary element methods and boundary-integral formulations in general to present contemporary concepts and techniques leading to the advancement of capabilities and understanding of this com putational methodology. The topics covered in this symposium include mathematical and computational aspects, applications to solid mechanics, fluid mechanics, acoustics, electromagnetics, heat transfer, optimization, control, inverse problems and other interdisciplinary problems. Papers deal ing with the coupling of the boundary element method with other computational methods are also included. The editors hope that this volume presents some innovative techniques and useful knowl edge for the development of the boundary element methods. February, 1992 S. Kobayashi N. Nishimura Contents Abe, K.
Download or read book Generalized Formulation and Numerical Solution for the Mechanics of Porous Media written by Xiaoyan Wu and published by . This book was released on 2002 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Boundary Element Methods written by C. A. Brebbia and published by . This book was released on 1981 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boundary Elements and Other Mesh Reduction Methods XXXVIII written by A.H-D. Cheng and published by WIT Press. This book was released on 2015-11-16 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the latest in a long line of conferences covering the most recent advances in Boundary Elements and Mesh Reduction Methods (BEM/MRM), this book contains an important chapter in the history of this important method used in science and engineering. The BEM/MRM conference has long been recognised as THE international forum on the technique. The proceedings of the conference therefore constitute a record of the development of the method, running from the initial successful development of boundary integral techniques into the BEM, a method that eliminates the need for an internal mesh, to the recent and most sophisticated Mesh Reduction and even Meshless Methods. Since the boundary elements, mesh reduction, and meshless methods are used in many engineering and scientific fields, the book will be of great interest to all engineers and scientists working within the areas of numerical analysis, boundary elements and meshless methods. Topics covered include: Advanced formulations; Advanced meshless and mesh reduction methods; Structural mechanics applications; Solid mechanics; Heat and mass transfer, Electrical engineering and electromagnetics; Computational methods; Fluid flow modelling; Damage mechanics and fracture; Dynamics and Vibrations Engineering applications.