Download or read book Transient Induced Latchup in CMOS Integrated Circuits written by Ming-Dou Ker and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book all semiconductor device engineers must read to gain a practical feel for latchup-induced failure to produce lower-cost and higher-density chips. Transient-Induced Latchup in CMOS Integrated Circuits equips the practicing engineer with all the tools needed to address this regularly occurring problem while becoming more proficient at IC layout. Ker and Hsu introduce the phenomenon and basic physical mechanism of latchup, explaining the critical issues that have resurfaced for CMOS technologies. Once readers can gain an understanding of the standard practices for TLU, Ker and Hsu discuss the physical mechanism of TLU under a system-level ESD test, while introducing an efficient component-level TLU measurement setup. The authors then present experimental methodologies to extract safe and area-efficient compact layout rules for latchup prevention, including layout rules for I/O cells, internal circuits, and between I/O and internal circuits. The book concludes with an appendix giving a practical example of extracting layout rules and guidelines for latchup prevention in a 0.18-micrometer 1.8V/3.3V silicided CMOS process. Presents real cases and solutions that occur in commercial CMOS IC chips Equips engineers with the skills to conserve chip layout area and decrease time-to-market Written by experts with real-world experience in circuit design and failure analysis Distilled from numerous courses taught by the authors in IC design houses worldwide The only book to introduce TLU under system-level ESD and EFT tests This book is essential for practicing engineers involved in IC design, IC design management, system and application design, reliability, and failure analysis. Undergraduate and postgraduate students, specializing in CMOS circuit design and layout, will find this book to be a valuable introduction to real-world industry problems and a key reference during the course of their careers.
Download or read book Latchup written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in latchup is being renewed with the evolution of complimentary metal-oxide semiconductor (CMOS) technology, metal-oxide-semiconductor field-effect transistor (MOSFET) scaling, and high-level system-on-chip (SOC) integration. Clear methodologies that grant protection from latchup, with insight into the physics, technology and circuit issues involved, are in increasing demand. This book describes CMOS and BiCMOS semiconductor technology and their sensitivity to present day latchup phenomena, from basic over-voltage and over-current conditions, single event latchup (SEL) and cable discharge events (CDE), to latchup domino phenomena. It contains chapters focusing on bipolar physics, latchup theory, latchup and guard ring characterization structures, characterization testing, product level test systems, product level testing and experimental results. Discussions on state-of-the-art semiconductor processes, design layout, and circuit level and system level latchup solutions are also included, as well as: latchup semiconductor process solutions for both CMOS to BiCMOS, such as shallow trench, deep trench, retrograde wells, connecting implants, sub-collectors, heavily-doped buried layers, and buried grids – from single- to triple-well CMOS; practical latchup design methods, automated and bench-level latchup testing methods and techniques, latchup theory of logarithm resistance space, generalized alpha (a) space, beta (b) space, new latchup design methods– connecting the theoretical to the practical analysis, and; examples of latchup computer aided design (CAD) methodologies, from design rule checking (DRC) and logical-to-physical design, to new latchup CAD methodologies that address latchup for internal and external latchup on a local as well as global design level. Latchup acts as a companion text to the author’s series of books on ESD (electrostatic discharge) protection, serving as an invaluable reference for the professional semiconductor chip and system-level ESD engineer. Semiconductor device, process and circuit designers, and quality, reliability and failure analysis engineers will find it informative on the issues that confront modern CMOS technology. Practitioners in the automotive and aerospace industries will also find it useful. In addition, its academic treatment will appeal to both senior and graduate students with interests in semiconductor process, device physics, computer aided design and design integration.
Download or read book Latchup in CMOS Technology written by R.R. Troutman and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why a book on Iatchup? Latchup has been, and continues to be, a potentially serious CMOS reliability concern. This concern is becoming more widespread with the ascendency of CMOS as the dominant VLSI technology, particularly as parasitic bipolar characteristics continue to improve at ever smaller dimensions on silicon wafers with ever lower defect densities. Although many successful parts have been marketed, latchup solutions have often been ad hoc. Although latchup avoidance techniques have been previously itemized, there has been little quantitative evaluation of prior latchup fixes. What is needed is a more general, more systematic treatment of the latchup problem. Because of the wide variety of CMOS technologies and the long term interest in latchup, some overall guiding principles are needed. Appreciating the variety of possible triggering mechanisms is key to a real understanding of latchup. This work reviews the origin of each and its effect on the parasitic structure. Each triggering mechanism is classified according to a new taxonomy.
Download or read book The Physics and Modeling of Latch up and CMOS Integrated Circuits written by Donald B. Estreich and published by . This book was released on 1980 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectronics Failure Analysis written by and published by ASM International. This book was released on 2004-01-01 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: For newcomers cast into the waters to sink or swim as well as seasoned professionals who want authoritative guidance desk-side, this hefty volume updates the previous (1999) edition. It contains the work of expert contributors who rallied to the job in response to a committee's call for help (the committee was assigned to the update by the Electron
Download or read book The ESD Handbook written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2021-03-02 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and comprehensive reference that explores Electrostatic Discharge (ESD) in semiconductor components and electronic systems The ESD Handbook offers a comprehensive reference that explores topics relevant to ESD design in semiconductor components and explores ESD in various systems. Electrostatic discharge is a common problem in the semiconductor environment and this reference fills a gap in the literature by discussing ESD protection. Written by a noted expert on the topic, the text offers a topic-by-topic reference that includes illustrative figures, discussions, and drawings. The handbook covers a wide-range of topics including ESD in manufacturing (garments, wrist straps, and shoes); ESD Testing; ESD device physics; ESD semiconductor process effects; ESD failure mechanisms; ESD circuits in different technologies (CMOS, Bipolar, etc.); ESD circuit types (Pin, Power, Pin-to-Pin, etc.); and much more. In addition, the text includes a glossary, index, tables, illustrations, and a variety of case studies. Contains a well-organized reference that provides a quick review on a range of ESD topics Fills the gap in the current literature by providing information from purely scientific and physical aspects to practical applications Offers information in clear and accessible terms Written by the accomplished author of the popular ESD book series Written for technicians, operators, engineers, circuit designers, and failure analysis engineers, The ESD Handbook contains an accessible reference to ESD design and ESD systems.
Download or read book ESD Testing written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2016-10-07 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the evolution of semiconductor technology and global diversification of the semiconductor business, testing of semiconductor devices to systems for electrostatic discharge (ESD) and electrical overstress (EOS) has increased in importance. ESD Testing: From Components to Systems updates the reader in the new tests, test models, and techniques in the characterization of semiconductor components for ESD, EOS, and latchup. Key features: Provides understanding and knowledge of ESD models and specifications including human body model (HBM), machine model (MM), charged device model (CDM), charged board model (CBM), cable discharge events (CDE), human metal model (HMM), IEC 61000-4-2 and IEC 61000-4-5. Discusses new testing methodologies such as transmission line pulse (TLP), to very fast transmission line pulse (VF-TLP), and future methods of long pulse TLP, to ultra-fast TLP (UF-TLP). Describes both conventional testing and new testing techniques for both chip and system level evaluation. Addresses EOS testing, electromagnetic compatibility (EMC) scanning, to current reconstruction methods. Discusses latchup characterization and testing methodologies for evaluation of semiconductor technology to product testing. ESD Testing: From Components to Systems is part of the authors’ series of books on electrostatic discharge (ESD) protection; this book will be an invaluable reference for the professional semiconductor chip and system-level ESD and EOS test engineer. Semiconductor device and process development, circuit designers, quality, reliability and failure analysis engineers will also find it an essential reference. In addition, its academic treatment will appeal to both senior and graduate students with interests in semiconductor process, device physics, semiconductor testing and experimental work.
Download or read book ESD written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic discharge (ESD) continues to impact semiconductor components and systems as technologies scale from micro- to nano-electronics. This book studies electrical overstress, ESD, and latchup from a whole-chip ESD design synthesis approach. It provides a clear insight into the integration of ESD protection networks from a generalist perspective, followed by examples in specific technologies, circuits, and chips. Uniquely both the semiconductor chip integration issues and floorplanning of ESD networks are covered from a ‘top-down' design approach. Look inside for extensive coverage on: integration of cores, power bussing, and signal pins in DRAM, SRAM, CMOS image processing chips, microprocessors, analog products, RF components and how the integration influences ESD design and integration architecturing of mixed voltage, mixed signal, to RF design for ESD analysis floorplanning for peripheral and core I/O designs, and the implications on ESD and latchup guard ring integration for both a ‘bottom-up' and ‘top-down' methodology addressing I/O guard rings, ESD guard rings, I/O to I/O, and I/O to core classification of ESD power clamps and ESD signal pin circuitry, and how to make the correct choice for a given semiconductor chip examples of ESD design for the state-of-the-art technologies discussed, including CMOS, BiCMOS, silicon on insulator (SOI), bipolar technology, high voltage CMOS (HVCMOS), RF CMOS, and smart power practical methods for the understanding of ESD circuit power distribution, ground rule development, internal bus distribution, current path analysis, quality metrics ESD: Design and Synthesis is a continuation of the author's series of books on ESD protection. It is an essential reference for: ESD, circuit, and semiconductor engineers; design synthesis team leaders; layout design, characterisation, floorplanning, test and reliability engineers; technicians; and groundrule and test site developers in the manufacturing and design of semiconductor chips. It is also useful for graduate and undergraduate students in electrical engineering, semiconductor sciences, and manufacturing sciences, and on courses involving the design of ESD devices, chips and systems. This book offers a useful insight into the issues that confront modern technology as we enter the nano-electronic era.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1982 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Test Structures for CMOS Latch up Prediction written by Philip Joseph Oldiges and published by . This book was released on 1985 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Electronic Design Automation Handbook written by Dirk Jansen and published by Springer Science & Business Media. This book was released on 2010-02-23 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: When I attended college we studied vacuum tubes in our junior year. At that time an average radio had ?ve vacuum tubes and better ones even seven. Then transistors appeared in 1960s. A good radio was judged to be one with more thententransistors. Latergoodradioshad15–20transistors and after that everyone stopped counting transistors. Today modern processors runing personal computers have over 10milliontransistorsandmoremillionswillbeaddedevery year. The difference between 20 and 20M is in complexity, methodology and business models. Designs with 20 tr- sistors are easily generated by design engineers without any tools, whilst designs with 20M transistors can not be done by humans in reasonable time without the help of Prof. Dr. Gajski demonstrates the Y-chart automation. This difference in complexity introduced a paradigm shift which required sophisticated methods and tools, and introduced design automation into design practice. By the decomposition of the design process into many tasks and abstraction levels the methodology of designing chips or systems has also evolved. Similarly, the business model has changed from vertical integration, in which one company did all the tasks from product speci?cation to manufacturing, to globally distributed, client server production in which most of the design and manufacturing tasks are outsourced.
Download or read book Semiconductor Devices and Integrated Electronics written by A. G. Milnes and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a need for a semiconductor device book that carries diode and transistor theory beyond an introductory level and yet has space to touch on a wider range of semiconductor device principles and applica tions. Such topics are covered in specialized monographs numbering many hun dreds, but the voluminous nature of this literature limits access for students. This book is the outcome of attempts to develop a broad course on devices and integrated electronics for university students at about senior-year level. The edu cational prerequisites are an introductory course in semiconductor junction and transistor concepts, and a course on analog and digital circuits that has intro duced the concepts of rectification, amplification, oscillators, modulation and logic and SWitching circuits. The book should also be of value to professional engineers and physicists because of both, the information included and the de tailed guide to the literature given by the references. The aim has been to bring some measure of order into the subject area examined and to provide a basic structure from which teachers may develop themes that are of most interest to students and themselves. Semiconductor devices and integrated circuits are reviewed and fundamental factors that control power levels, frequency, speed, size and cost are discussed. The text also briefly mentions how devices are used and presents circuits and comments on representative applications. Thus, the book seeks a balance be tween the extremes of device physics and circuit design.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital CMOS Circuit Design written by Silvia Annaratone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Circuit Design for Radiation Environments written by Stephen J. Gaul and published by John Wiley & Sons. This book was released on 2019-12-03 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to the effects of radiation on semiconductor components of electronic systems, and techniques for the designing, laying out, and testing of hardened integrated circuits This book teaches the fundamentals of radiation environments and their effects on electronic components, as well as how to design, lay out, and test cost-effective hardened semiconductor chips not only for today’s space systems but for commercial terrestrial applications as well. It provides a historical perspective, the fundamental science of radiation, and the basics of semiconductors, as well as radiation-induced failure mechanisms in semiconductor chips. Integrated Circuits Design for Radiation Environments starts by introducing readers to semiconductors and radiation environments (including space, atmospheric, and terrestrial environments) followed by circuit design and layout. The book introduces radiation effects phenomena including single-event effects, total ionizing dose damage and displacement damage) and shows how technological solutions can address both phenomena. Describes the fundamentals of radiation environments and their effects on electronic components Teaches readers how to design, lay out and test cost-effective hardened semiconductor chips for space systems and commercial terrestrial applications Covers natural and man-made radiation environments, space systems and commercial terrestrial applications Provides up-to-date coverage of state-of-the-art of radiation hardening technology in one concise volume Includes questions and answers for the reader to test their knowledge Integrated Circuits Design for Radiation Environments will appeal to researchers and product developers in the semiconductor, space, and defense industries, as well as electronic engineers in the medical field. The book is also helpful for system, layout, process, device, reliability, applications, ESD, latchup and circuit design semiconductor engineers, along with anyone involved in micro-electronics used in harsh environments.
Download or read book ERDA Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low power HF Microelectronics written by Gerson A. S. Machado and published by IET. This book was released on 1996 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together innovative modelling, simulation and design techniques in CMOS, SOI, GaAs and BJT to achieve successful high-yield manufacture for low-power, high-speed and reliable-by-design analogue and mixed-mode integrated systems.
