Download or read book Analysis and Design Optimization of Micromixers Conclusion written by Arshad Afzal and published by . This book was released on 2021 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the computational framework based on knowledge of flow and mass transfer together with optimization techniques to solve problems relevant to micromixing technology. The authors provide a detailed analysis of the different numerical techniques applied to the design of micromixers. Flow and mixing analysis is based on both the Eulerian and Lagrangian approaches; relative advantages and disadvantages of the two methods and suitability to different types of mixing problems are analysed. The book also discusses the various facets of numerical schemes subjected to discretization errors and computational grid requirements. Since a large number of studies are based on commercial computational fluid dynamics (CFD) packages, relevant details of these packages to the mixing problem using them are presented. Numerical optimization techniques coupled with CFD analysis of flow and mixing have proved to be an important tool for micromixers design, and therefore, are an important part of the book. These techniques are presented briefly, and focus is on surrogate modeling and optimization applied to design of micromixers.
Download or read book Analysis and Design Optimization of Micromixers written by Arshad Afzal and published by Springer Nature. This book was released on 2020-12-07 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the computational framework based on knowledge of flow and mass transfer together with optimization techniques to solve problems relevant to micromixing technology. The authors provide a detailed analysis of the different numerical techniques applied to the design of micromixers. Flow and mixing analysis is based on both the Eulerian and Lagrangian approaches; relative advantages and disadvantages of the two methods and suitability to different types of mixing problems are analysed. The book also discusses the various facets of numerical schemes subjected to discretization errors and computational grid requirements. Since a large number of studies are based on commercial computational fluid dynamics (CFD) packages, relevant details of these packages to the mixing problem using them are presented. Numerical optimization techniques coupled with CFD analysis of flow and mixing have proved to be an important tool for micromixers design, and therefore, are an important part of the book. These techniques are presented briefly, and focus is on surrogate modeling and optimization applied to design of micromixers.
Download or read book Analysis and Design Optimization of Micromixers Active and Passive micromixers 3 Computational analysis of flow and mixing in micromixers 4 Design optimization of micromixers written by Arshad Afzal and published by . This book was released on 2021 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book illustrates the computational framework based on knowledge of flow and mass transfer together with optimization techniques to solve problems relevant to micromixing technology. The authors provide a detailed analysis of the different numerical techniques applied to the design of micromixers. Flow and mixing analysis is based on both the Eulerian and Lagrangian approaches; relative advantages and disadvantages of the two methods and suitability to different types of mixing problems are analysed. The book also discusses the various facets of numerical schemes subjected to discretization errors and computational grid requirements. Since a large number of studies are based on commercial computational fluid dynamics (CFD) packages, relevant details of these packages to the mixing problem using them are presented. Numerical optimization techniques coupled with CFD analysis of flow and mixing have proved to be an important tool for micromixers design, and therefore, are an important part of the book. These techniques are presented briefly, and focus is on surrogate modeling and optimization applied to design of micromixers.
Download or read book Design Analysis and Multi criteria Optimization of Micromixers written by C. A. Cortes Quiroz and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passive Micromixers written by Mubashshir A. and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passive Micromixers written by Mubashshir Ansari A. (Ed.) and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Micromixers written by Nam-Trung Nguyen and published by William Andrew. This book was released on 2011-09-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to mix minute quantities of fluids is critical in a range of recent and emerging techniques in engineering, chemistry and life sciences, with applications as diverse as inkjet printing, pharmaceutical manufacturing, specialty and hazardous chemical manufacturing, DNA analysis and disease diagnosis. The multidisciplinary nature of this field – intersecting engineering, physics, chemistry, biology, microtechnology and biotechnology – means that the community of engineers and scientists now engaged in developing microfluidic devices has entered the field from a variety of different backgrounds. Micromixers is uniquely comprehensive, in that it deals not only with the problems that are directly related to fluidics as a discipline (aspects such as mass transport, molecular diffusion, electrokinetic phenomena, flow instabilities, etc.) but also with the practical issues of fabricating micomixers and building them into microsystems and lab-on-chip assemblies.With practical applications to the design of systems vital in modern communications, medicine and industry this book has already established itself as a key reference in an emerging and important field. The 2e includes coverage of a broader range of fabrication techniques, additional examples of fully realized devices for each type of micromixer and a substantially extended section on industrial applications, including recent and emerging applications. Introduces the design and applications of micromixers for a broad audience across chemical engineering, electronics and the life sciences, and applications as diverse as lab-on-a-chip, ink jet printing, pharmaceutical manufacturing and DNA analysis Helps engineers and scientists to unlock the potential of micromixers by explaining both the scientific (microfluidics) aspects and the engineering involved in building and using successful microscale systems and devices with micromixers The author's applied approach combines experience-based discussion of the challenges and pitfalls of using micromixers, with proposals for how to overcome them
Download or read book Process Analysis Design and Intensification in Microfluidics and Chemical Engineering written by Santana, Harrson Silva and published by IGI Global. This book was released on 2019-01-18 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics represent great potential for chemical processes design, development, optimization, and chemical engineering bolsters the project design of industrial processes often found in large chemical plants. Together, microfluidics and chemical engineering can lead to a more complete and comprehensive process. Process Analysis, Design, and Intensification in Microfluidics and Chemical Engineering provides emerging research exploring the theoretical and practical aspects of microfluidics and its application in chemical engineering with the intention of building pathways for new processes and product developments in industrial areas. Featuring coverage on a broad range of topics such as design techniques, hydrodynamics, and numerical modelling, this book is ideally designed for engineers, chemists, microfluidics and chemical engineering companies, academicians, researchers, and students.
Download or read book Passive Micromixers written by Kwang-Yong Kim and published by MDPI. This book was released on 2018-08-20 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue " Passive Micromixers" that was published in Micromachines
Download or read book Issues in Environmental Research and Application 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 4876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Environmental Research and Application: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Environmental Research and Application. The editors have built Issues in Environmental Research and Application: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Environmental Research and Application in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Environmental Research and Application: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Advances in Heat Transfer and Fluid Dynamics written by Mohammad Altamush Siddiqui and published by Springer Nature. This book was released on with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CFD Based Researches and Applications for Fluid Machinery and Fluid Device written by Jin-Hyuk Kim and published by . This book was released on 2021 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demand for computational fluid dynamics (CFD)-based numerical techniques is increasing rapidly with the development of the computing power system. These advanced CFD techniques are applicable to various issues in the industrial engineering fields and especially contribute to the design of fluid machinery and fluid devices, which have very complicated unsteady flow phenomena and physics. In other words, to aid the rapid development of CFD techniques, the performances of fluid machinery and fluid devices with complicated unsteady flows have been enhanced significantly. In addition, many persistently troublesome problems of fluid machinery and fluid devices such as flow instability, rotor-stator interaction, surging, cavitation, vibration, and noise are solved clearly using advanced CFD techniques.This Special Issue on “CFD-Based Research and Applications for Fluid Machinery and Fluid Devices” aims to present recent novel research trends based on advanced CFD techniques for fluid machinery and fluid devices. The following topics, among others, are included in this issue:- CFD techniques and applications in fluid machinery and fluid devices;- Unsteady and transient phenomena in fluid machinery and fluid devices;- Pumps, fans, compressors, hydraulic turbines, pump turbines, valves, etc.
Download or read book Advances in Modelling and Optimization of Manufacturing and Industrial Systems written by Ravi Pratap Singh and published by Springer Nature. This book was released on 2023-03-01 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the 2nd International Conference on Industrial and Manufacturing Systems (CIMS 2021) and discusses the applications of soft computing, modelling and optimization practices in industrial and manufacturing systems. Various topics covered in this book include advanced machining methods and performances, industrial operations, processing with hybrid manufacturing techniques, fabrication and developments in micro-machining and its applications, practical issues in supply chain, micro-structure analysis, additive manufacturing processes, reliability and system analysis, material science and metallurgical behaviour analysis, product design and development, etc. The book will be a valuable reference for beginners, researchers, and professionals interested in the modelling, optimization and soft computing related aspects of industrial and production engineering and its allied domains.
Download or read book Model based Geostatistics written by Peter Diggle and published by Springer Science & Business Media. This book was released on 2007-05-26 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the first book-length treatment of model-based geostatistics. The text is expository, emphasizing statistical methods and applications rather than the underlying mathematical theory. Analyses of datasets from a range of scientific contexts feature prominently, and simulations are used to illustrate theoretical results. Readers can reproduce most of the computational results in the book by using the authors' software package, geoR, whose usage is illustrated in a computation section at the end of each chapter. The book assumes a working knowledge of classical and Bayesian methods of inference, linear models, and generalized linear models.
Download or read book Topology Optimization Theory for Laminar Flow written by Yongbo Deng and published by Springer. This book was released on 2017-09-27 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the topology optimization theory for laminar flows with low and moderate Reynolds numbers, based on the density method and level-set method, respectively. The density-method-based theory offers efficient convergence, while the level-set-method-based theory can provide anaccurate mathematical expression of the structural boundary. Unsteady, body-force-driven and two-phase properties are basic characteristics of the laminar flows. The book discusses these properties, which are typical of microfluidics and one of the research hotspots in the area of Micro-Electro-Mechanical Systems (MEMS), providing an efficient inverse design approach for microfluidic structures. To demonstrate the applications of this topology optimization theory in the context of microfluidics, it also investigates inverse design for the micromixer, microvalve and micropump, which are key elements in lab-on-chip devices.
Download or read book Numerical Prediction of Flow Heat Transfer Turbulence and Combustion written by D. Brian Spalding and published by Elsevier. This book was released on 2015-07-14 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Prediction of Flow, Heat Transfer, Turbulence and Combustion: Selected Works of Professor D. Brian Spalding focuses on the many contributions of Professor Spalding on thermodynamics. This compilation of his works is done to honor the professor on the occasion of his 60th birthday. Relatively, the works contained in this book are selected to highlight the genius of Professor Spalding in this field of interest. The book presents various research on combustion, heat transfer, turbulence, and flows. His thinking on separated flows paved the way for the multi-dimensional modeling of turbulence. Arguments on the universality of the models of turbulence and the problems that are associated with combustion engineering are clarified. The text notes the importance of combustion science as well as the problems associated with it. Mathematical computations are also presented in determining turbulent flows in different environments, including on curved pipes, curved ducts, and rotating ducts. These calculations are presented to further strengthen the claims of Professor Spalding in this discipline. The book is a great find for those who are interested in studying thermodynamics.
Download or read book Lab on a Chip Devices and Micro Total Analysis Systems written by Jaime Castillo-León and published by Springer. This book was released on 2014-11-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all the steps in order to fabricate a lab-on-a-chip device starting from the idea, the design, simulation, fabrication and final evaluation. Additionally, it includes basic theory on microfluidics essential to understand how fluids behave at such reduced scale. Examples of successful histories of lab-on-a-chip systems that made an impact in fields like biomedicine and life sciences are also provided. This book also: · Provides readers with a unique approach and toolset for lab-on-a-chip development in terms of materials, fabrication techniques, and components · Discusses novel materials and techniques, such as paper-based devices and synthesis of chemical compounds on-chip · Covers the four key aspects of development: basic theory, design, fabrication, and testing · Provides readers with a comprehensive list of the most important journals, blogs, forums, and conferences where microfluidics and lab-on-a-chip news, methods, techniques and challenges are presented and discussed, as well as a list of companies providing design and simulation support, components, and/or developing lab-on-a-chip and microfluidic devices.
