Download or read book Analysis and Design of Steel Tubular Pile Foundations Embedded in Typical Soils written by Zeinab Bayati and published by . This book was released on 2022 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piles should sustain the axial loads transmitted from the supported structure without failing in bearing capacity and/or undergoing structural damage, as well as limit excessive settlements. This is verified by examining the stability (strength) and serviceability (e.g. permissible settlements) of the pile foundation. Classical design frameworks (e.g. the AASHTO LRFD specifications) only address the pile design at the strength limit state, and the pile serviceability is typically checked after determining the design bearing capacity. Therefore, a more comprehensive and practical design framework is required to account simultaneously for the strength and serviceability limit states. An analysis approach based on predicting the load-settlement response can facilitate the incorporation of both strength and serviceability limit states in the routine design of axially loaded pile foundations. The research presented in this dissertation aimed at investigating the strength and serviceability limit states for the analysis and design of axially loaded steel tubular piles. The research was conducted over three major phases of study. The first phase investigated the stability of a pile having tubular steel square section. The model considered buckling of an axially loaded pile entrenched in a continuous medium. Three-dimensional finite element analyses were conducted by modelling partially embedded piles in typical clayey and sandy soils. Three-dimensional analyses were necessary in order to account for the influence of the surrounding soil elastic medium. In order to model the pile section as closely as possible to reality, no particular restrains were imposed on the pile tip. The influence of the pile head restraint, as well as lateral soil support, on the stability of a pile was investigated. Moreover, the effect of the pile-soil interface stiffness on the value of critical buckling load (Pcr) was brought to light for design purposes. The second phase of the study verified the stability of the pile-soil system against failure by considering the nonlinearity of the surrounding soil medium. The serviceability of the pilesoil system was also examined at this stage by means of the pile load-settlement relation in order to certify satisfactory control of the allowable deformations. The objectives of the second phase of the study were met through conducting two levels of analyses: (1) Continuum medium-based finite element analyses, and (2) one-dimensional load transfer analyses. The first level of analyses involved using two- and three-dimensional finite element simulations, that incorporated classical elasto-plastic (Drucker-Prager and Mohr-Coulomb), and nonlinear elastic (Duncan-Chang and Hyperbolic) soil models. The properties of such soils are generally obtained from lab tests. In this context, a new modelling strategy was proposed for the elasto-plastic analysis of steel tubular section piles having sharp corners embedded in a granular (sandy) soil medium. The second level of analyses introduced an approach based on the simultaneous use of the load transfer and finite element analysis methods. In this framework, an elasto-plastic finite element approach was implemented in order to conduct nonlinear finite element analyses with the load-settlement response curve of axially loaded single piles. This was achieved via the nonlinear pile-soil stress-displacement curves along the pile shaft (t-z curve) and a tip (qz curve). The plasticity algorithm considered strain hardening through the pile-soil interaction (t-z and q-z) curves. The load transfer analysis showed a significantly improved characterization for the pile load-settlement behavior compared to field test results. The computation of pile settlement was also improved by reproducing the interaction curves for both pile shaft and pile tip via the use of the so-called “Sublayer” or “Overlay” method. Finally, the third phase aimed at providing a practical design framework accounting simultaneously for the pile strength and serviceability limit states. The design framework accounts for the stability (buckling) of the pile section and can be extended to the design of different types of deep foundations such as steel tubular and concrete piles.
Download or read book Design of Pile Foundations written by Aleksandar Sedmak Vesić and published by Transportation Research Board. This book was released on 1977-01-01 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Pile Foundations in Liquefiable Soils written by Gopal Madabhushi and published by World Scientific. This book was released on 2010 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile foundations are the most common form of deep foundations that are used both onshore and offshore to transfer large superstructural loads into competent soil strata. This book provides many case histories of failure of pile foundations due to earthquake loading and soil liquefaction. Based on the observed case histories, the possible mechanisms of failure of the pile foundations are postulated. The book also deals with the additional loading attracted by piles in liquefiable soils due to lateral spreading of sloping ground. Recent research at Cambridge forms the backbone of this book with the design methodologies being developed directly based on quantified centrifuge test results and numerical analysis.The book provides designers and practicing civil engineers with a sound knowledge of pile behaviour in liquefiable soils and easy-to-use methods to design pile foundations in seismic regions. For graduate students and researchers, it brings together the latest research findings on pile foundations in a way that is relevant to geotechnical practice.
Download or read book Pile Foundations in Engineering Practice written by Shamsher Prakash and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a concise, systematic and complete treatment of the design and construction of pile foundations. Discusses pile behavior under various loadings and types of piles and their installation, including consideration of soil parameters. It provides step-by-step design procedures for piles subject to vertical loading and pullout, lateral, inclined and eccentric loads, or dynamic loads, and for piles in permafrost. Also describes load test procedures and their interpretation and buckling of long, slender piles with and without supported length. The closing chapter presents case histories of prediction and performance of piles and pile groups. Includes numerous solved problems.
Download or read book Foundation Analysis and Design written by Joseph E. Bowles and published by McGraw-Hill Companies. This book was released on 1982 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing. Copyright © Libri GmbH. All rights reserved.
Download or read book Pile Design and Construction Rules of Thumb written by Ruwan Abey Rajapakse and published by Butterworth-Heinemann. This book was released on 2016-02-20 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Design and Construction Rules of Thumb presents Geotechnical and Civil Engineers a comprehensive coverage of Pile Foundation related theory and practice. Based on the author’s experience as a PE, the book brings concise theory and extensive calculations, examples and case studies that can be easily applied by professional in their day-to-day challenges. In its first part, the book covers the fundamentals of Pile Selection: Soil investigation, condition, pile types and how to choose them. In the second part it addresses the Design of Pile Foundations, including different types of soils, pile groups, pile settlement and pile design in rock. Next, the most extensive part covers Design Strategies and contains chapters on loading analysis, load distribution, negative skin friction, design for expansive soils, wave equation analysis, batter piles, seismic analysis and the use of softwares for design aid. The fourth part covers Construction Methods including hammers, Inspection, cost estimation, load tests, offshore piling, beams and caps. In this new and updated edition the author has incorporated new pile designs such as helical, composite, wind turbine monopiles, and spiral coil energy piles. All calculations have been updated to most current materials characteristics and designs available in the market. Also, new chapters on negative skin friction, pile driving, and pile load testing have been added. Practicing Geotechnical, and Civil Engineers will find in this book an excellent handbook for frequent consult, benefiting from the clear and direct calculations, examples, and cases. Civil Engineering preparing for PE exams may benefit from the extensive coverage of the subject. Convenient for day-to-day consults Numerous design examples for sandy soils, clay soils, and seismic loadings Now including helical, composite, wind turbine monopiles, and spiral coil energy piles Methodologies and case studies for different pile types Serves as PE exam preparation material
Download or read book Analysis and Design of Pile Foundations written by Joseph Ray Meyer and published by . This book was released on 1984 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Analysis and Design of Deep Foundations written by Murad Abu-Farsakh and published by Springer. This book was released on 2017-07-11 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume on “Advances in Analysis and Design of Deep Foundations” contains 22 technical papers which cover various aspects of analysis and design of deep foundations based on full-scale field testing, numerical modeling, and analytical solutions. The technical papers are 8-10 pages long that present the results and findings from research as well as practical-oriented studies on deep foundations that are of interest to civil/geotechnical engineering community. The topics cover a wide spectrum of applications that include evaluation of the axial and lateral capacity of piles, pile group effects, evaluation of the increase in pile capacity with time (or pile setup), influence of excavation on pile capacity, study the behavior of pile raft caisson foundations, evaluate the bearing capacity and settlement of piles from cone penetration tests, etc. This volume is part of the proceedings of the 1st GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2017.
Download or read book Postgraduate Course on Analysis and Design of Pile Foundations written by University of Sydney. School of Civil Engineering and published by . This book was released on 1972 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis Design and Construction of Pile Foundations in the Coastal Environment written by Francis K.-P. Cheung and published by . This book was released on 1981 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
Download or read book Analysis Design and Construction of Foundations written by Yung Ming Cheng and published by CRC Press. This book was released on 2024-05-28 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis, Design and Construction of Foundations covers the key concepts in the analysis and design of foundation systems, balancing theory with engineering practice. The book examines in depth the methods used for the analysis, design and construction of shallow foundations, deep foundations, excavation and lateral support systems, slope stability and stabilization and ground monitoring for proper site management. Some new and innovative foundation construction methods are also introduced. It is illustrated with case studies of failures and defects from actual construction projects. This second edition is extensively revised and developed to include a new chapter on numerical methods in geotechnical engineering, as well as a large number of new construction drawings, project photos and construction method statements from existing projects to give the book a stronger professional application and connection to engineering practice. It also covers some new advanced theoretical concepts not covered in other texts, making it useful in both the theoretical and practical aspects. It is ideal for senior undergraduates and graduate students, academics and consulting geotechnical engineers.
Download or read book The Design of Piled Foundations written by Thomas Whitaker and published by Elsevier. This book was released on 2013-10-22 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Design of Piled Foundations, Second Edition focuses on the theories which have been advanced to predict the loads which piles will carry, both singly and when used in groups to form a piled foundation. Organized into 12 chapters, this book begins with an explanation of the utilization of piles. Subsequent chapters discuss the types of piles and their construction; pile driving by vibration; the calculation of the ultimate bearing capacity of a pile from soil properties; the settlement of single piles and the choice of a factor of safety; and piles in soft soils. Other chapters describe pile testing; piles in groups with vertical loading; horizontal forces on piles and pile group; and the durability of piles.
Download or read book Pile Design and Construction Practice written by Michael Tomlinson and published by CRC Press. This book was released on 2014-10-08 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to Eurocode 7 and the UK National AnnexUpdated to reflect the current usage of Eurocode 7, along with relevant parts of the British Standards, Pile Design and Construction Practice, Sixth Edition maintains the empirical correlations of the original-combining practical know how with scientific knowledge-and emphasizing relevant principles an
Download or read book Piles and Pile Foundations written by Carlo Viggiani and published by CRC Press. This book was released on 2014-11-06 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piled foundations are generally designed using empirical methods, in particular the traditional capacity based approach on which the majority of codes of practice are based. However in recent years the analysis of pile groups and piled rafts has undergone substantial development in the light of new research and the mechanisms for the interactions b
Download or read book Analysis and Design of Shallow and Deep Foundations written by Lymon C. Reese and published by John Wiley & Sons. This book was released on 2005-11-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-of-a-kind coverage on the fundamentals of foundation analysis and design Analysis and Design of Shallow and Deep Foundations is a significant new resource to the engineering principles used in the analysis and design of both shallow and deep, load-bearing foundations for a variety of building and structural types. Its unique presentation focuses on new developments in computer-aided analysis and soil-structure interaction, including foundations as deformable bodies. Written by the world's leading foundation engineers, Analysis and Design of Shallow and Deep Foundations covers everything from soil investigations and loading analysis to major types of foundations and construction methods. It also features: * Coverage on computer-assisted analytical methods, balanced with standard methods such as site visits and the role of engineering geology * Methods for computing the capacity and settlement of both shallow and deep foundations * Field-testing methods and sample case studies, including projects where foundations have failed, supported with analyses of the failure * CD-ROM containing demonstration versions of analytical geotechnical software from Ensoft, Inc. tailored for use by students in the classroom
Download or read book Pile Foundations written by National Research Council (U.S.). Highway Research Board and published by . This book was released on 1970 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: And review of Part I of the Symposium on Pile Foundations / Martin S. Kapp -- Types of piles : their characteristics and general use / Bernard A. Grand -- Pile driving : hammers and driving methods / George J. Gendron -- Pile-driving formulas / Ernest T. Mosley, Tonis Raamot -- Pile-driving analysis by one-dimensional theory : state of the art / T.J. Hirsch (and others) -- Summary and review of Part II of the Symposium on Pile Foundations / G.A. Leonards -- Structural behavior of driven piling / Donald L. York -- Pile load tests including quick-load test method, conventional methods, and interpretations / Frank M. Fuller and Horace E. Hoy -- Bearing capacity of foundation piles : state of the art / Harrry M. Coyle, Ibrahim H, . Sulaiman -- Lateral load capacity of piles / M.T. Davisson -- Current construction practices in the installation of high-capacity piling / Ben C. Gerwick, Jr. -- Pile load test by impact driving / G.G. Noble, Frank Rausche.
