Download or read book Analysis and Design of Energy Systems written by American Society of Mechanical Engineers. Winter Annual Meeting and published by . This book was released on 1989 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ECOS 2012 The 25th International Conference on Efficiency Cost Optimization and Simulation of Energy Conversion Systems and Processes Perugia June 26th June 29th 2012 written by Umberto Desideri and published by Firenze University Press. This book was released on 2012 with total page 3218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8-volume set contains the Proceedings of the 25th ECOS 2012 International Conference, Perugia, Italy, June 26th to June 29th, 2012. ECOS is an acronym for Efficiency, Cost, Optimization and Simulation (of energy conversion systems and processes), summarizing the topics covered in ECOS: Thermodynamics, Heat and Mass Transfer, Exergy and Second Law Analysis, Process Integration and Heat Exchanger Networks, Fluid Dynamics and Power Plant Components, Fuel Cells, Simulation of Energy Conversion Systems, Renewable Energies, Thermo-Economic Analysis and Optimisation, Combustion, Chemical Reactors, Carbon Capture and Sequestration, Building/Urban/Complex Energy Systems, Water Desalination and Use of Water Resources, Energy Systems- Environmental and Sustainability Issues, System Operation/ Control/Diagnosis and Prognosis, Industrial Ecology.
Download or read book Energy Optimization in Process Systems written by Stanislaw Sieniutycz and published by Elsevier. This book was released on 2009-05-06 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the vast research on energy optimization and process integration, there has to date been no synthesis linking these together. This book fills the gap, presenting optimization and integration in energy and process engineering. The content is based on the current literature and includes novel approaches developed by the authors. Various thermal and chemical systems (heat and mass exchangers, thermal and water networks, energy converters, recovery units, solar collectors, and separators) are considered. Thermodynamics, kinetics and economics are used to formulate and solve problems with constraints on process rates, equipment size, environmental parameters, and costs. Comprehensive coverage of dynamic optimization of energy conversion systems and separation units is provided along with suitable computational algorithms for deterministic and stochastic optimization approaches based on: nonlinear programming, dynamic programming, variational calculus, Hamilton-Jacobi-Bellman theory, Pontryagin's maximum principles, and special methods of process integration. Integration of heat energy and process water within a total site is shown to be a significant factor reducing production costs, in particular costs of utilities for the chemical industry. This integration involves systematic design and optimization of heat exchangers and water networks (HEN and WN). After presenting basic, insight-based Pinch Technology, systematic, optimization-based sequential and simultaneous approaches to design HEN and WN are described. Special consideration is given to the HEN design problem targeting stage, in view of its importance at various levels of system design. Selected, advanced methods for HEN synthesis and retrofit are presented. For WN design a novel approach based on stochastic optimization is described that accounts for both grassroot and revamp design scenarios. - Presents a unique synthesis of energy optimization and process integration that applies scientific information from thermodynamics, kinetics, and systems theory - Discusses engineering applications including power generation, resource upgrading, radiation conversion and chemical transformation, in static and dynamic systems - Clarifies how to identify thermal and chemical constraints and incorporate them into optimization models and solutions
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design in Control and Engineering Systems written by P. Martin Larsen and published by Elsevier. This book was released on 2014-05-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Aided Design in Control and Engineering Systems contains the proceedings of the 3rd International Federation of Automatic Control/International Federation for Information Processing Symposium held in Lyngby, Denmark, from July 31 to August 2, 1985. The papers review the state of the art and the trends in development of computer aided design (CAD) of control and engineering systems, techniques, procedures, and concepts. This book is comprised of 74 chapters divided into 17 sections and begins with a description of a prototype computer environment that combines expert control system analysis and design tools. The discussion then turns to decision support systems which could be used to address problems of management and control of large-scale multiproduct multiline batch manufacturing outside the mechanical engineering industries. The following chapters focus on the use of CAD in control education, industrial applications of CAD, and hardware/software systems. Some examples of universal and specialized CAD packages are presented, and applications of CAD in electric power plants, process control systems, and transportation systems are highlighted. The remaining chapters look at CAD/computer aided engineering/computer aided manufacturing systems as well as the use of mathematical methods in CAD. This monograph will be of interest to practitioners in computer science, computer engineering, and industrial engineering.
Download or read book Computer Aided Design in Control Systems 1988 written by Zhen-Yu Chen and published by Elsevier. This book was released on 2017-05-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 73 papers, presenting the state of the art in computer-aided design in control systems (CADCS). The latest information and exchange of ideas presented at the Symposium illustrates the development of computer-aided design science and technology within control systems. The Proceedings contain six plenary papers and six special invited papers, and the remainder are divided into five themes: CADCS packages; CADCS software and hardware; systems design methods; CADCS expert systems; CADCS applications, with finally a discussion on CADCS in education and research.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Design and Optimization written by Adrian Bejan and published by John Wiley & Sons. This book was released on 1995-12-12 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and rigorous introduction to thermal system designfrom a contemporary perspective Thermal Design and Optimization offers readers a lucid introductionto the latest methodologies for the design of thermal systems andemphasizes engineering economics, system simulation, andoptimization methods. The methods of exergy analysis, entropygeneration minimization, and thermoeconomics are incorporated in anevolutionary manner. This book is one of the few sources available that addresses therecommendations of the Accreditation Board for Engineering andTechnology for new courses in design engineering. Intended forclassroom use as well as self-study, the text provides a review offundamental concepts, extensive reference lists, end-of-chapterproblem sets, helpful appendices, and a comprehensive case studythat is followed throughout the text. Contents include: * Introduction to Thermal System Design * Thermodynamics, Modeling, and Design Analysis * Exergy Analysis * Heat Transfer, Modeling, and Design Analysis * Applications with Heat and Fluid Flow * Applications with Thermodynamics and Heat and Fluid Flow * Economic Analysis * Thermoeconomic Analysis and Evaluation * Thermoeconomic Optimization Thermal Design and Optimization offers engineering students,practicing engineers, and technical managers a comprehensive andrigorous introduction to thermal system design and optimizationfrom a distinctly contemporary perspective. Unlike traditionalbooks that are largely oriented toward design analysis andcomponents, this forward-thinking book aligns itself with anincreasing number of active designers who believe that moreeffective, system-oriented design methods are needed. Thermal Design and Optimization offers a lucid presentation ofthermodynamics, heat transfer, and fluid mechanics as they areapplied to the design of thermal systems. This book broadens thescope of engineering design by placing a strong emphasis onengineering economics, system simulation, and optimizationtechniques. Opening with a concise review of fundamentals, itdevelops design methods within a framework of industrialapplications that gradually increase in complexity. Theseapplications include, among others, power generation by large andsmall systems, and cryogenic systems for the manufacturing,chemical, and food processing industries. This unique book draws on the best contemporary thinking aboutdesign and design methodology, including discussions of concurrentdesign and quality function deployment. Recent developments basedon the second law of thermodynamics are also included, especiallythe use of exergy analysis, entropy generation minimization, andthermoeconomics. To demonstrate the application of important designprinciples introduced, a single case study involving the design ofa cogeneration system is followed throughout the book. In addition, Thermal Design and Optimization is one of the best newsources available for meeting the recommendations of theAccreditation Board for Engineering and Technology for more designemphasis in engineering curricula. Supported by extensive reference lists, end-of-chapter problemsets, and helpful appendices, this is a superb text for both theclassroom and self-study, and for use in industrial design,development, and research. A detailed solutions manual is availablefrom the publisher.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1980 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Complexity and Complex Thermo Economic Systems written by Stanislaw Sieniutycz and published by Elsevier. This book was released on 2019-11-24 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complexity and Complex Thermoeconomic Systems describes the properties of complexity and complex thermo-economic systems as the consequence of formulations, definitions, tools, solutions and results consistent with the best performance of a system. Applying to complex systems contemporary advanced techniques, such as static optimization, optimal control, and neural networks, this book treats the systems theory as a science of general laws for functional integrities. It also provides a platform for the discussion of various definitions of complexity, complex hierarchical structures, self-organization examples, special references, and historical issues. This book is a valuable reference for scientists, engineers and graduated students in chemical, mechanical, and environmental engineering, as well as those in physics, ecology and biology, helping them better understand the complex thermodynamic systems and enhance their technical skills in research. - Provides a lucid presentation of the dynamical properties of thermoeconomic systems - Includes original graphical material that illustrates the properties of complex systems - Written by a first-class expert in the field of advanced methods in thermodynamics
Download or read book Publications of the National Bureau of Standards 1979 Catalog written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Department of the Army Pamphlet written by and published by . This book was released on with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1987 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1980 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1978 with total page 1018 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling and Control of Biotechnological Processes written by A. Johnson and published by Elsevier. This book was released on 2014-05-17 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling and Control of Biotechnological Processes contains the proceedings of the International Federation of Automatic Control's First Symposium on Modeling and Control of Biotechnological Processes held in Noordwijkerhout, The Netherlands, on December 11-13, 1985. The papers explore modeling and control of biotechnological processes such as fermentation and biological wastewater treatment. This book consists of 37 chapters divided into 11 sections and begins with a discussion on the control of fermentation processes; modeling of biotechnical processes; and application of measurement and estimation techniques to biotechnology. The following sections focus on adaptive control theory, applications of adaptive control, and control and modeling of bioreactors. The reader is also introduced to measurement techniques and sensors, with emphasis on pyrolysis mass spectrometry; rapid bioelectrochemical methods; and a self-tuning controller for multiloop controlled fed-batch fermentation. The remaining sections deal with parameter identification and estimation; Kalman filtering techniques; optimization of production processes; modeling of microkinetics; and optimization theory. This monograph will be of interest to researchers and practitioners in the field of biotechnology.
