Download or read book Analyse de l interface catalyseur support milieu aqueux dans l oxydation d esp ces dissoutes written by Hélène Marchand-Cury and published by . This book was released on 1997 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Le rôle de l'adsorption a été étudié dans l'oxydation catalytique hétérogène des molécules organiques et du sulfure d'hydrogène en présence d'oxyde métallique supporté. Les propriétés physiques et superficielles des supports ont été mesurées avant et après dispersion du catalyseur. Ensuite, on a étudié le comportement des catalyseurs et des supports vis-à-vis des ions minéraux rencontrés dans une eau naturelle type Méry-sur-Oise (hydrogénocarbonate de sodium et chlorure de calcium). La connaissance approfondie des propriétés superficielles des catalyseurs supportés et de leur affinité vis-à-vis des ions minéraux a permi de préciser le rôle du catalyseur et du support dans l'adsorption de quatre molécules organiques et de connaître les mécanismes de l'adsorption du salicylate (modèle des substances humiques) sur deux supports. Le rôle de l'adsorption dans l'oxydation catalytique a été par la suite estimé à l'aide d'expérimentation faite en présence d'ozone. Il apparaît que l'oxydation peut se produire lorsque la molécule est adsorbée ou non. Les mécanismes de l'oxydation catalytique restent proches de ceux connus de la phase homogène donc ils sont très sensibles au pH. Le catalyseur et les supports adsorbent l'ozone et participent à sa décomposition initiale en présence d'ions hydroxyle ou de peroxyde. La vitesse d'initiation radicalaire est certainement accélérée grâce au catalyseur mais pas suffisament pour éviter des réactions d' adsorption ou d'oxydation directe. L'étude sur l'oxydation catalytique du sulfure d'hydrogène met en évidence son adsorption-oxydation sous trois formes. Deux sont aisément réversibles et représentent la majorité du soufre adsorbé dans des conditions de concentration en sulfure faible. La forme la plus stable, un sulfure métallique, correspond à un empoisonnement limité de l'oxyde. Le support du catalyseur est inerte vis-à-vis des sulfures et des sulfates lorsque l'oxyde métallique est présent
Download or read book Scientific Basis for Nuclear Waste Management XXII Volume 556 written by David J. Wronkiewicz and published by . This book was released on 1999-11-24 with total page 1370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safe and effective management of nuclear waste provides a broad range of challenges for materials science. Waste processing, waste form and engineered barrier properties, interactions between engineered and geological systems, radiation effects, chemistry and transport of waste species, and long-term predictions of repository performance are just some of the scientific problems facing modern society. This book, the 22nd in a very successful series from MRS, offers an international and inter-disciplinary perspective on the issues, and features developments in both fundamental and applied areas. Topics include: development and characterization of ceramic waste forms; ceramic waste form corrosion; glass waste form processing; glass formulation, properties and structure; glass waste form corrosion; spent nuclear fuel; performance assessment; repository backfill; flow and transport; natural analogues; container corrosion; metal waste form corrosion; radionuclide speciation and solubility; radionuclide sorption; microbial effects; radiation effects; cement waste forms and waste treatment.
Download or read book Activated Carbon written by Harry Marsh and published by Elsevier. This book was released on 2006-07-12 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen an expansion in speciality uses of activated carbons including medicine, filtration, and the purification of liquids and gaseous media. Much of current research and information surrounding the nature and use of activated carbon is scattered throughout various literature, which has created the need for an up-to-date comprehensive and integrated review reference. In this book, special attention is paid to porosities in all forms of carbon, and to the modern-day materials which use activated carbons - including fibres, clothes, felts and monoliths. In addition, the use of activated carbon in its granular and powder forms to facilitate usage in liquid and gaseous media is explored. Activated Carbon will make essential reading for Material Scientists, Chemists and Engineers in academia and industry. - Characterization of porosity - The surface chemistry of the carbons - Methods of activation and mechanisms of adsorptio - Computer modelling of structure and porosity within carbons - Modern instrumental analytical methods
Download or read book Food Chemistry Research Developments written by Konstantinos N. Papadopoulos and published by Nova Publishers. This book was released on 2008 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food chemistry is the study of chemical processes and interactions of all biological and non-biological components of foods. The biological substances include such items as meat, poultry, lettuce, beer, and milk as examples. It is similar to biochemistry in its main components such as carbohydrates, lipids, and protein, but it also includes areas such as water, vitamins, minerals, enzymes, food additives, flavours, and colours. This discipline also encompasses how products change under certain food processing techniques and ways either to enhance or to prevent them from happening. An example of enhancing a process would be to encourage fermentation of dairy products with lactic acid; an example of a preventing process would be stopping the Maillard reaction on the surface of freshly cut Red Delicious apples whether by hand or mechanical methods. This book presents the recent research from around the world in this field.
Download or read book Nanoscale Graphitic Carbon Nitride written by Alagarsamy Pandikumar and published by Elsevier. This book was released on 2021-09-09 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Graphitic Carbon Nitride focuses on multi-functional applications including energy conversion, storage and healthcare. Polymeric graphitic carbon nitride materials have attracted much attention in recent years because of their similarity to graphene. They are composed of carbon, nitrogen and some minor hydrogen content. In contrast to graphene, g-Graphitic carbon nitride is a medium band-gap semiconductor and in that role an effective photocatalyst and chemical catalyst for a broad variety of reactions and applications. This book covers the fundamentals and applications of graphitic carbon nitride (g-C3N4) in different sectors. It also covers the application of graphitic carbon nitride-based composites with metal, metal oxides, metal sulphide and carbon-based materials. This is an important resource for researchers in the fields of materials science, engineering, energy storage and chemical engineering who want to understand how nanoscale graphitic carbon nitride is being used for a range of industrial applications and processes. Outlines the major properties of nanoscale graphitic carbon nitride, along with their major application areas Assesses the challenges of manufacturing graphitic carbon nitride on a mass scale Explains major synthesis methods for nanoscale graphitic carbon nitride
Download or read book Flexoelectricity in Liquid Crystals written by Agnes Buka and published by World Scientific. This book was released on 2013 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book intends to give a state-of-the-art overview of flexoelectricity, a linear physical coupling between mechanical (orientational) deformations and electric polarization, which is specific to systems with orientational order, such as liquid crystals. Chapters written by experts in the field shed light on theoretical as well as experimental aspects of research carried out since the discovery of flexoelectricity. Besides a common macroscopic (continuum) description the microscopic theory of flexoelectricity is also addressed. Electro-optic effects due to or modified by flexoelectricity as well as various (direct and indirect) measurement methods are discussed. Special emphasis is given to the role of flexoelectricity in pattern-forming instabilities. While the main focus of the book lies in flexoelectricity in nematic liquid crystals, peculiarities of other mesophases (bent-core systems, cholesterics, and smectics) are also reviewed. Flexoelectricity has relevance to biological (living) systems and can also offer possibilities for technical applications. The basics of these two interdisciplinary fields are also summarized.
Download or read book Scientific Basis for Nuclear Waste Management XXIII Volume 608 written by Robert W. Smith and published by . This book was released on 2000-10-09 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-standing symposia series has become the premier, international forum for scientific and engineering issues related to all levels and types of radioactive wastes and their management. Topics include: fuel cladding and spent nuclear fuel; container fabrication and corrosion; performance assessment; repository performance; radionuclide sorption and transport; cement-based materials and waste containment; corrosion of ceramic wasteforms; structure and characterization of ceramics; radiation effects; natural analogs; wasteform characterization and processing; and corrosion and characterization of glass wasteforms.
Download or read book Encapsulations written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-05-27 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encapsulations, a volume in the Nanotechnology in the Agri-Food Industry series,presents key elements in establishing food quality through the improvement of food flavor and aroma. The major benefits of nanoencapsulation for food ingredients include improvement in bioavailability of flavor and aroma ingredients, improvement in solubility of poor water-soluble ingredients, higher ingredient retention during production process, higher activity levels of encapsulated ingredients, improved shelf life, and controlled release of flavor and aroma. This volume discusses main nanoencapsulation processes such as spray drying, melt injection, extrusion, coacervation, and emulsification. The materials used in nanoencapsulation include lipids, proteins, carbohydrates, cellulose, gums, and food grade polymers. Applications and benefits of nanoencapsulation such as controlled release, protections, and taste masking will be explained in detail. Includes the most up-to-date information on nanoencapsulation and nanocontainer-based delivery of antimicrobials Presents nanomaterials for innovation based on scientific advancements in the field Provides control release strategies to enhance bioactivity, including methods and techniques for research and innovation Provides useful tools to improve the delivery of bioactive molecules and living cells into foods
Download or read book In Situ Gelling Polymers written by Xian Jun Loh and published by Springer. This book was released on 2014-10-01 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the research involving in situ gelling polymers and can be used as a guidebook for academics, industrialists and postgraduates interested in this area. This work summaries the academic contributions from the top authorities in the field and explore the fundamental principles of in situ gelling polymeric networks, along with examples of their major applications. This book aims to provide an up-to-date resource of in situ gelling polymer research.
Download or read book Porous Carbons written by Feiyu Kang and published by Elsevier. This book was released on 2021-11-04 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon materials form pores ranging in size and morphology, from micropores of less than 1nm, to macropores of more than 50nm, and from channel-like spaces with homogenous diameters in carbon nanotubes, to round spaces in various fullerene cages, including irregularly-shaped pores in polycrystalline carbon materials. The large quantity and rapid rate of absorption of various molecules made possible by these attributes of carbon materials are now used in the storage of foreign atoms and ions for energy storage, conversion and adsorption, and for environmental remediation. Porous Carbons: Syntheses and Applications focuses on the fabrication and application of porous carbons. It considers fabrication at three scales: micropores, mesopores, and macropores. Carbon foams, sponges, and 3D-structured carbons are detailed. The title presents applications in four key areas: energy storage, energy conversion, energy adsorption, including batteries, supercapacitors, and fuel cells and environmental remediation, emphasizing the importance of pore structures at the three scales, and the diffusion and storage of various ions and molecules. The book presents a short history of each technique and material, and assesses advantages and disadvantages. This focused book provides researchers with a comprehensive understanding of both pioneering and current synthesis techniques for porous carbons, and their modern applications. - Presents modern porous carbon synthesis techniques and modern applications of porous carbons - Presents current research on porous carbons in energy storage, conversion and adsorption, and in environmental remediation - Provides a history and assessment of both pioneering and current cutting-edge synthesis techniques and materials - Covers a significant range of precursor materials, preparation techniques, and characteristics - Considers the future development of porous carbons and their various potential applications
Download or read book Wood Adhesives written by Antonio Pizzi and published by CRC Press. This book was released on 2011-01-07 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood adhesives are of tremendous industrial importance, as more than two-thirds of wood products in the world today are completely or partially bonded together using a variety of adhesives. Adhesive bonding offers many advantages over other joining methods for wood components, and there has been a great deal of R& D activity in devising new wood adhesives or improving the existing ones. The modern mantra in all industrial sectors is: "think green, go green," which has attracted much attention in the wood adhesive industry. Therefore, there is also a lot of research activity in synthesizing environmentally benign and human-friendly wood adhesives. This book is divided into four parts: Part 1: Fundamental Adhesion Aspects in Wood Bonding; Part 2: Synthetic Adhesives; Part 3: Environment-friendly adhesives; and Part 4: Wood Welding and General Paper. It addresses many different types of wood adhesives, as well as bonding (welding) of wood components without adhesives, a more recent development. The information contained in this book is valuable for individuals engaged in all aspects of wood adhesion and adhesives and, hopefully, will inspire new ideas in wood adhesives, a topic of vital industrial importance.
Download or read book Karen s New Bike Baby Sitters Little Sister 62 written by Ann M. Martin and published by Scholastic Inc.. This book was released on 2016-05-31 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the bestselling author of the generation-defining series The Baby-sitters Club comes a series for a new generation! Yikes, My Bike! Karen is learning all about bike safety in school. She is even going to enter a bike-a-thon. But Karen’s bike is too small for her. So with Daddy’s help, Karen buys a new bike. Then Karen’s new bike is stolen. Can Karen catch the thief and get her bike back?
Download or read book Organochlorine Insecticides written by F. Moriarty and published by . This book was released on 1975 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monitoring persistent organic pollhitants; exposure and residues; variationin the intake and elimination of pollutants; the role of the thy roid in the production of sublethal effec by organochlorine insecticides and polychlorine insecticides on amimal populations; persistent percides an economic and legal analysis.
Download or read book Catalogue of the Fresh water Fishes of Africa in the British Museum Natural History written by British Museum (Natural History). Department of Zoology and published by . This book was released on 1909 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rivulins of the Old World written by Jørgen J. Scheel and published by TFH Publications. This book was released on 1975 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Alloys written by E. Yasuda and published by Elsevier. This book was released on 2003-03-05 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years the Japanese have funded a comprehensive study of carbon materials which incorporate other elements including boron, nitrogen and fluorine, hence the title of the project "Carbon Alloys".Coined in 1992, the phrase "Carbon Alloys" can be applied to those materials mainly composed of carbon materials in multi-component systems. The carbon atoms of each component have a physical and/or chemical interactive relationship with other atoms or compounds. The carbon atoms of the components may have different hybrid bonding orbitals to create quite different carbon components.Eiichi Yasuda and his team consider the definition of Carbon Alloys, present the results of the Carbon Alloys projects, describe typical Carbon Alloys and their uses, discuss recent techniques for their characterization, and finally, illustrate potential applications and future developments for Carbon Alloy science. The book contains over thirty chapters on these studies from as many researchers.The most modern of techniques, particularly in the area of spectroscopy, were used as diagnostic tools, and many of these are applicable to pure carbons also. Porosity in carbons received considerable attention.
Download or read book Nonlinear Optical Materials written by Jerome V. Moloney and published by Springer Science & Business Media. This book was released on 1998-08-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical methods play a significant role in the rapidly growing field of nonlinear optical materials. This volume discusses a number of successful or promising contributions. The overall theme of this volume is twofold: (1) the challenges faced in computing and optimizing nonlinear optical material properties; and (2) the exploitation of these properties in important areas of application. These include the design of optical amplifiers and lasers, as well as novel optical switches. Research topics in this volume include how to exploit the magnetooptic effect, how to work with the nonlinear optical response of materials, how to predict laser-induced breakdown in efficient optical devices, and how to handle electron cloud distortion in femtosecond processes.
