Download or read book Analog Integrated Circuit Design Techniques for High speed Signal Processing in Communications Systems written by David Hernandez Garduno and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents design techniques for the implementation of high-speed analog integrated circuits for wireless and wireline communications systems. Limitations commonly found in high-speed switched-capacitor (SC) circuits used for intermediate frequency (IF) filters in wireless receivers are explored. A model to analyze the aliasing effects due to periodical non-uniform individual sampling, a technique used in high-Q high-speed SC filters, is presented along with practical expressions that estimate the power of the generated alias components. The results are verified through circuit simulation of a 10.7MHz bandpass SC filter in TSMC 0.35mu-m CMOS technology. Implications on the use of this technique on the design of IF filters are discussed. To improve the speed at which SC networks can operate, a continuous-time common-mode feedback (CMFB) with reduced loading capacitance is proposed. This increases the achievable gain-bandwidth product (GBW) of fully-differential amplifiers. The performance of the CMFB is demonstrated in the implementation of a second-order 10.7MHz bandpass SC filter and compared with that of an identical filter using the conventional switched-capacitor CMFB (SC-CMFB). The filter using the continuous-time CMFB reduces the error due to finite GBW and slew rate to less than 1% for clock frequencies up to 72MHz while providing a dynamic range of 59dB and a PSRR-> 22dB. The design of high-speed transversal equalizers for wireline transceivers requires the implementation of broadband delay lines. A delay line based on a third-order linear-phase filter is presented for the implementation of a fractionally-spaced 1Gb/s transversal equalizer. Two topologies for a broadband summing node which enable the placement of the parasitic poles at the output of the transversal equalizer beyond 650MHz are presented. Using these cells, a 5-tap 1Gb/s equalizer was implemented in TSMC 0.35mu-m CMOS technology. The results show a programmable frequency response able to compensate up to 25dB loss at 500MHz. The eye-pattern diagrams at 1Gb/s demonstrate the equalization of 15 meters and 23 meters of CAT5e twisted-pair cable, with a vertical eye-opening improvement from 0% (before the equalizer) to 58% (after the equalizer) in the second case. The equalizer consumes 96mW and an area of 630mu-m x 490mu-m.

Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible. The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O. Contents: Achieving Analog Accuracy in Nanometer CMOS (M P Flynn et al.); Self-Induced Noise in Integrated Circuits (R Gharpurey & S Naraghi); High-Speed Oversampling Analog-to-Digital Converters (A Gharbiya et al.); Designing LC VCOs Using Capacitive Degeneration Techniques (B Jung & R Harjani); Fully Integrated Frequency Synthesizers: A Tutorial (S T Moon et al.); Recent Advances and Design Trends in CMOS Radio Frequency Integrated Circuits (D J Allstot et al.); Equalizers for High-Speed Serial Links (P K Hanumolu et al.); Low-Power, Parallel Interface with Continuous-Time Adaptive Passive Equalizer and Crosstalk Cancellation (C P Yue et al.). Readership: Technologists, scientists, and engineers in the field of high-speed communication circuits. It can also be used as a textbook for graduate and advanced undergraduate courses.

Download or read book CMOS Analog Integrated Circuits written by Tertulien Ndjountche and published by CRC Press. This book was released on 2019-12-17 with total page 1176 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed, power-efficient analog integrated circuits can be used as standalone devices or to interface modern digital signal processors and micro-controllers in various applications, including multimedia, communication, instrumentation, and control systems. New architectures and low device geometry of complementary metaloxidesemiconductor (CMOS) technologies have accelerated the movement toward system on a chip design, which merges analog circuits with digital, and radio-frequency components.

Download or read book Analog Integrated Circuits for Communication written by Donald O. Pederson and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis and design of analog integrated circuits that form the basis of present-day communication systems. The material is intended to be a textbook for class use but should also be a valuable source of information for a practicing engineer. Both bipolar and MOS transistor circuits are analyzed and many numerical examples are used to illustrate the analysis and design techniques developed in this book. A set of problems is presented at the end of the book which covers the subject matter of the whole book. The book has originated out of a senior-level course on nonlinear, analog integrated circuits at the University of California at Berkeley. The material contained in this book has been taught by the first author for several years and the book has been class tested for six semesters. This along with feedback from the students is reflected in the organization and writing of the text. We expect that the students have had an introductory course in analog circuits so that they are familiar with some of the basic analysis techniques and also with the operating principles of the various semiconductor devices. Several important, basic circuits and concepts are reviewed as the subject matter is developed.

Download or read book Generalized Low Voltage Circuit Techniques for Very High Speed Time Interleaved Analog to Digital Converters written by Sai-Weng Sin and published by Springer Science & Business Media. This book was released on 2010-09-29 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog-to-Digital Converters (ADCs) play an important role in most modern signal processing and wireless communication systems where extensive signal manipulation is necessary to be performed by complicated digital signal processing (DSP) circuitry. This trend also creates the possibility of fabricating all functional blocks of a system in a single chip (System On Chip - SoC), with great reductions in cost, chip area and power consumption. However, this tendency places an increasing challenge, in terms of speed, resolution, power consumption, and noise performance, in the design of the front-end ADC which is usually the bottleneck of the whole system, especially under the unavoidable low supply-voltage imposed by technology scaling, as well as the requirement of battery operated portable devices. Generalized Low-Voltage Circuit Techniques for Very High-Speed Time-Interleaved Analog-to-Digital Converters will present new techniques tailored for low-voltage and high-speed Switched-Capacitor (SC) ADC with various design-specific considerations.

Download or read book Analog Circuit Design written by Willy M.C. Sansen and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concentrates on three topics: mixed analog--digital circuit design, sensor interface circuits and communication circuits. The book comprises six papers on each topic of a tutorial nature aimed at improving the design of analog circuits. The book is divided into three parts. Part I: Mixed Analog--Digital Circuit Design considers the largest growth area in microelectronics. Both standard designs and ASICs have begun integrating analog cells and digital sections on the same chip. The papers cover topics such as groundbounce and supply-line spikes, design methodologies for high-level design and actual mixed analog--digital designs. Part II: Sensor Interface Circuits describes various types of signal conditioning circuits and interfaces for sensors. These include interface solutions for capacitive sensors, sigma--delta modulation used to combine a microprocessor compatible interface with on chip CMOS sensors, injectable sensors and responders, signal conditioning circuits and sensors combined with indirect converters. Part III: Communication Circuits concentrates on systems and implemented circuits for use in personal communication systems. These have applications in cordless telephones and mobile telephone systems for use in cellular networks. A major requirement for these systems is low power consumption, especially when operating in standby mode, so as to maximise the time between battery recharges.

Download or read book Analog Circuit Design Techniques at 0 5V written by Shouri Chatterjee and published by Springer Science & Business Media. This book was released on 2010-04-02 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tackles challenges for the design of analog integrated circuits that operate from ultra-low power supply voltages (down to 0.5V). Coverage demonstrates the signal processing circuit and circuit biasing approaches through the design of operational transconductance amplifiers (OTAs). These amplifiers are then used to build analog system functions including continuous time filter and a sample and hold amplifier.

Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: Manufacturing techniques for 3-D ICs with TSVs Electrical modeling and closed-form expressions of through silicon vias Substrate noise coupling in heterogeneous 3-D ICs Design of 3-D ICs with inductive links Synchronization in 3-D ICs Variation effects on 3-D ICs Correlation of WID variations for intra-tier buffers and wires Offers practical guidance on designing 3-D heterogeneous systems Provides power delivery of 3-D ICs Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more Provides experimental case studies in power delivery, synchronization, and thermal characterization

Download or read book Analog Integrated Circuit Design written by Tony Chan Carusone and published by John Wiley & Sons. This book was released on 2011-12-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2nd Edition of Analog Integrated Circuit Design focuses on more coverage about several types of circuits that have increased in importance in the past decade. Furthermore, the text is enhanced with material on CMOS IC device modeling, updated processing layout and expanded coverage to reflect technical innovations. CMOS devices and circuits have more influence in this edition as well as a reduced amount of text on BiCMOS and bipolar information. New chapters include topics on frequency response of analog ICs and basic theory of feedback amplifiers.

Download or read book Signal Processing and Integrated Circuits written by Hussein Baher and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced account of analog, digital and mixed-mode signal processing with applications in telecommunications. Part I Perspective gives an overview of the areas of Systems on a Chip (Soc) and mobile communication which are used to demonstrate the complementary relationship between analog and digital systems. Part II Analog (continuous-time) and Digital Signal Processing contains both fundamental and advanced analysis, and design techniques, of analog and digital systems. This includes analog and digital filter design; fast Fourier transform (FFT) algorithms; stochastic signals; linear estimation and adaptive filters. Part III Analog MOS Integrated Circuits for Signal Processing covers basic MOS transistor operation and fabrication through to the design of complex integrated circuits such as high performance Op Amps, Operational Transconductance Amplifiers (OTA's) and Gm-C circuits. Part IV Switched-capacitor and Mixed-mode Signal Processing outlines the design of switched-capacitor filters, and concludes with sigma-delta data converters as an extensive application of analog and digital signal processing Contains the fundamentals and advanced techniques of continuous-time and discrete-time signal processing. Presents in detail the design of analog MOS integrated circuits for signal processing, with application to the design of switched-capacitor filters. Uses the comprehensive design of integrated sigma-delta data converters to illustrate and unify the techniques of signal processing. Includes solved examples, end of chapter problems and MATLAB® throughout the book, to help readers understand the mathematical complexities of signal processing. The treatment of the topic is at the senior undergraduate to graduate and professional levels, with sufficient introductory material for the book to be used as a self-contained reference.

Download or read book CMOS Current Mode Circuits for Data Communications written by Fei Yuan and published by Springer Science & Business Media. This book was released on 2007-04-26 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis and design of CMOS current-mode circuits for data communications. CMOS current-mode sampled-data networks, i.e. switched-current circuits, are excluded. Major subjects covered in the book include: a critical comparison of voltage-mode and current-mode circuits; the building blocks of current-mode circuits: design techniques; modeling of wire channels, electrical signaling for Gbps data communications; ESD protection for current-mode circuits and more. This book will appeal to IC design engineers, hardware system engineers and others.

Download or read book Digitally Assisted Fully Integrated Wideband Transmitters for High Speed Millimeter Wave Wireless Communication Links written by David del Rio and published by Springer. This book was released on 2018-07-07 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents design methods and considerations for digitally-assisted wideband millimeter-wave transmitters. It addresses comprehensively both RF design and digital implementation simultaneously, in order to design energy- and cost-efficient high-performance transmitters for mm-wave high-speed communications. It covers the complete design flow, from link budget assessment to the transistor-level design of different RF front-end blocks, such as mixers and power amplifiers, presenting different alternatives and discussing the existing trade-offs. The authors also analyze the effect of the imperfections of these blocks in the overall performance, while describing techniques to correct and compensate for them digitally. Well-known techniques are revisited, and some new ones are described, giving examples of their applications and proving them in real integrated circuits.

Download or read book Analog Circuit Theory and Filter Design in the Digital World written by George S. Moschytz and published by Springer. This book was released on 2019-04-15 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is designed for graduate-level courses, and for self-study, in analog and sampled-data, including switched-capacitor, circuit theory and design for ongoing, or active electrical engineers, needing to become proficient in analog circuit design on a system, rather than on a device, level. After decades of experience in industry and teaching this material in academic settings, the author has extracted many of the most important and useful features of analog circuit theory and design and presented them in a manner that is easy to digest and utilize. The methodology and analysis techniques presented can be applied to areas well beyond those specifically addressed in this book. This book is meant to enable readers to gain a 'general knowledge' of one aspect of analog engineering (e.g., that of network theory, filter design, system theory and sampled-data signal processing). The presentation is self-contained and should be accessible to anyone with a first degree in electrical engineering.

Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many interesting design trends are shown by the six papers on operational amplifiers (Op Amps). Firstly. there is the line of stand-alone Op Amps using a bipolar IC technology which combines high-frequency and high voltage. This line is represented in papers by Bill Gross and Derek Bowers. Bill Gross shows an improved high-frequency compensation technique of a high quality three stage Op Amp. Derek Bowers improves the gain and frequency behaviour of the stages of a two-stage Op Amp. Both papers also present trends in current-mode feedback Op Amps. Low-voltage bipolar Op Amp design is presented by leroen Fonderie. He shows how multipath nested Miller compensation can be applied to turn rail-to-rail input and output stages into high quality low-voltage Op Amps. Two papers on CMOS Op Amps by Michael Steyaert and Klaas Bult show how high speed and high gain VLSI building blocks can be realised. Without departing from a single-stage OT A structure with a folded cascode output, a thorough high frequency design technique and a gain-boosting technique contributed to the high-speed and the high-gain achieved with these Op Amps. . Finally. Rinaldo Castello shows us how to provide output power with CMOS buffer amplifiers. The combination of class A and AB stages in a multipath nested Miller structure provides the required linearity and bandwidth.

Download or read book High Performance Multi Channel High Speed I O Circuits written by Taehyoun Oh and published by Springer Science & Business Media. This book was released on 2013-09-07 with total page 91 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes design techniques that can be used to mitigate crosstalk in high-speed I/O circuits. The focus of the book is in developing compact and low power integrated circuits for crosstalk cancellation, inter-symbol interference (ISI) mitigation and improved bit error rates (BER) at higher speeds. This book is one of the first to discuss in detail the problem of crosstalk and ISI mitigation encountered as data rates have continued beyond 10Gb/s. Readers will learn to avoid the data performance cliff, with circuits and design techniques described for novel, low power crosstalk cancellation methods that are easily combined with current ISI mitigation architectures.

Download or read book Analog Circuit Design written by Rudy J. van de Plassche and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the extended and revised editions of all the talks of the ninth AACD Workshop held in Hotel Bachmair, April 11 - 13 2000 in Rottach-Egem, Germany. The local organization was managed by Rudolf Koch of Infineon Technologies AG, Munich, Germany. The program consisted of six tutorials per day during three days. Experts in the field presented these tutorials and state of the art information is communicated. The audience at the end of the workshop selects program topics for the following workshop. The program committee, consisting of Johan Huijsing of Delft University of Technology, Willy Sansen of Katholieke Universiteit Leuven and Rudy van de Plassche of Broadcom Netherlands BV Bunnik elaborates the selected topics into a three-day program and selects experts in the field for presentation. Each AACD Workshop has given rise to publication of a book by Kluwer entitled "Analog Circuit Design". A series of nine books in a row provides valuable information and good overviews of all analog circuit techniques concerning design, CAD, simulation and device modeling. These books can be seen as a reference to those people involved in analog and mixed signal design. The aim of the workshop is to brainstorm on new and valuable design ideas in the area of analog circuit design. It is the hope of the program committee that this ninth book continues the tradition of emerging contributions to the design of analog and mixed signal systems in Europe and the rest of the world.

Download or read book Variation Tolerant On Chip Interconnects written by Ethiopia Enideg Nigussie and published by Springer Science & Business Media. This book was released on 2011-12-02 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents design techniques, analysis and implementation of high performance and power efficient, variation tolerant on-chip interconnects. Given the design paradigm shift to multi-core, interconnect-centric designs and the increase in sources of variability and their impact in sub-100nm technologies, this book will be an invaluable reference for anyone concerned with the design of next generation, high-performance electronics systems.