Download or read book Analog Filters in Nanometer CMOS written by Heimo Uhrmann and published by Springer Science & Business Media. This book was released on 2013-08-15 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from the basics of analog filters and the poor transistor characteristics in nanometer CMOS 10 high-performance analog filters developed by the authors in 120 nm and 65 nm CMOS are described extensively. Among them are gm-C filters, current-mode filters, and active filters for system-on-chip realization for Bluetooth, WCDMA, UWB, DVB-H, and LTE applications. For the active filters several operational amplifier designs are described. The book, furthermore, contains a review of the newest state of research on low-voltage low-power analog filters. To cover the topic of the book comprehensively, linearization issues and measurement methods for the characterization of advanced analog filters are introduced in addition. Numerous elaborate illustrations promote an easy comprehension. This book will be of value to engineers and researchers in industry as well as scientists and Ph.D students at universities. The book is also recommendable to graduate students specializing on nanoelectronics, microelectronics or circuit engineering.

Download or read book Low Power High Speed ADCs for Nanometer CMOS Integration written by Zhiheng Cao and published by Springer Science & Business Media. This book was released on 2008-07-15 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-Power High-Speed ADCs for Nanometer CMOS Integration is about the design and implementation of ADC in nanometer CMOS processes that achieve lower power consumption for a given speed and resolution than previous designs, through architectural and circuit innovations that take advantage of unique features of nanometer CMOS processes. A phase lock loop (PLL) clock multiplier has also been designed using new circuit techniques and successfully tested. 1) A 1.2V, 52mW, 210MS/s 10-bit two-step ADC in 130nm CMOS occupying 0.38mm2. Using offset canceling comparators and capacitor networks implemented with small value interconnect capacitors to replace resistor ladder/multiplexer in conventional sub-ranging ADCs, it achieves 74dB SFDR for 10MHz and 71dB SFDR for 100MHz input. 2) A 32mW, 1.25GS/s 6-bit ADC with 2.5GHz internal clock in 130nm CMOS. A new type of architecture that combines flash and SAR enables the lowest power consumption, 6-bit >1GS/s ADC reported to date. This design can be a drop-in replacement for existing flash ADCs since it does require any post-processing or calibration step and has the same latency as flash. 3) A 0.4ps-rms-jitter (integrated from 3kHz to 300MHz offset for >2.5GHz) 1-3GHz tunable, phase-noise programmable clock-multiplier PLL for generating sampling clock to the SAR ADC. A new loop filter structure enables phase error preamplification to lower PLL in-band noise without increasing loop filter capacitor size.

Download or read book High Performance AD and DA Converters IC Design in Scaled Technologies and Time Domain Signal Processing written by Pieter Harpe and published by Springer. This book was released on 2014-07-23 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 23rd workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, serving as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.

Download or read book VLSI Analog Filters written by P.V. Ananda Mohan and published by Springer Science & Business Media. This book was released on 2012-10-03 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: ​Great strides have been made in the development of analog filters over the past few decades. The first book to treat these recent advances in depth, "VLSI Analog Filters" provides a comprehensive guide for researchers and upper-level graduate students, which fully prepares readers for professional work. In particular, the work covers active R filters, OTA-C filters, and switched-capacitor filters, including topics such as differential output opamps, sensitivity analysis for passive components, multiple-feedback techniques, double-sampling, and N-path filters. Throughout the book, exercises are included to reinforce understanding of concepts, and simulations are used to enhance connections to practical applications. This advanced textbook is suitable for engineering graduate students studying analog filter design, offering a full course that can feed seamlessly to employment industry. At the same time, it serves as an extremely valuable reference for researchers and engineers looking to gain a deeper understanding of the field.

Download or read book Silicon Optoelectronic Integrated Circuits written by Horst Zimmermann and published by Springer. This book was released on 2019-01-30 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains the circuit design of silicon optoelectronic integrated circuits (OEICs), which are central to advances in wireless and wired telecommunications. The essential features of optical absorption are summarized, as is the device physics of photodetectors and their integration in modern bipolar, CMOS, and BiCMOS technologies. This information provides the basis for understanding the underlying mechanisms of the OEICs described in the main part of the book. In order to cover the topic comprehensively, Silicon Optoelectronic Integrated Circuits presents detailed descriptions of many OEICs for a wide variety of applications from various optical sensors, smart sensors, 3D-cameras, and optical storage systems (DVD) to fiber receivers in deep-sub-μm CMOS. Numerous detailed illustrations help to elucidate the material.

Download or read book A New Family of CMOS Cascode Free Amplifiers with High Energy Efficiency and Improved Gain written by Ricardo Filipe Sereno Póvoa and published by Springer. This book was released on 2018-08-10 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the need for energy-efficient amplifiers, providing gain enhancement strategies, suitable to run in parallel with lower supply voltages, by introducing a new family of single-stage cascode-free amplifiers, with proper design, optimization, fabrication and experimental evaluation. The authors describe several topologies, using the UMC 130 nm CMOS technology node with standard-VT devices, for proof-of-concept, achieving results far beyond what is achievable with a classic single-stage folded-cascode amplifier. Readers will learn about a new family of circuits with a broad range of applications, together with the familiarization with a state-of-the-art electronic design automation methodology used to explore the design space of the proposed circuit family.

Download or read book 1V CMOS Gm C Filters written by Tien-Yu Lo and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1V CMOS Gm-C Filters: Design and Applications discusses the design aspects of transconductor and Gm-C filter circuits, with a special focus on 1V circuit implementations. The emphasis is on high linearity voltage-to-current blocks for wireless and wireline applications, and the designs cover up to very high speed specifications. 1V CMOS Gm-C Filters: Design and Applications provides a clear introduction of low voltage architectures and yields insight into the influence of circuit non-idealities. The fully CMOS implementation could be useful for wireless and wireline applications. The basic design concepts can be easily constructed through the illustration of this book. This book can be provided for engineers and researchers who are interested in the transconductor and Gm-C filter. It is also a good reference for the course related to analog integrated circuit design.

Download or read book Optoelectronic Circuits in Nanometer CMOS Technology written by Mohamed Atef and published by Springer. This book was released on 2016-03-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the newest implementations of integrated photodiodes fabricated in nanometer standard CMOS technologies. It also includes the required fundamentals, the state-of-the-art, and the design of high-performance laser drivers, transimpedance amplifiers, equalizers, and limiting amplifiers fabricated in nanometer CMOS technologies. This book shows the newest results for the performance of integrated optical receivers, laser drivers, modulator drivers and optical sensors in nanometer standard CMOS technologies. Nanometer CMOS technologies rapidly advanced, enabling the implementation of integrated optical receivers for high data rates of several Giga-bits per second and of high-pixel count optical imagers and sensors. In particular, low cost silicon CMOS optoelectronic integrated circuits became very attractive because they can be extensively applied to short-distance optical communications, such as local area network, chip-to-chip and board-to-board interconnects as well as to imaging and medical sensors.

Download or read book CMOS written by Angelo Rivetti and published by CRC Press. This book was released on 2018-09-03 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS: Front-End Electronics for Radiation Sensors offers a comprehensive introduction to integrated front-end electronics for radiation detectors, focusing on devices that capture individual particles or photons and are used in nuclear and high energy physics, space instrumentation, medical physics, homeland security, and related fields. Emphasizing practical design and implementation, this book: Covers the fundamental principles of signal processing for radiation detectors Discusses the relevant analog building blocks used in the front-end electronics Employs systematically weak and moderate inversion regimes in circuit analysis Makes complex topics such as noise and circuit-weighting functions more accessible Includes numerical examples where appropriate CMOS: Front-End Electronics for Radiation Sensors provides specialized knowledge previously obtained only through the study of multiple technical and scientific papers. It is an ideal text for students of physics and electronics engineering, as well as a useful reference for experienced practitioners.

Download or read book Nanometer CMOS Sigma Delta Modulators for Software Defined Radio written by Alonso Morgado and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents innovative solutions for the implementation of Sigma-Delta Modulation (SDM) based Analog-to-Digital Conversion (ADC), required for the next generation of wireless hand-held terminals. These devices will be based on the so-called multi-standard transceiver chipsets, integrated in nanometer CMOS technologies. One of the most challenging and critical parts in such transceivers is the analog-digital interface, because of the assorted signal bandwidths and dynamic ranges that can be required to handle the A/D conversion for several operation modes. This book describes new adaptive and reconfigurable SDM ADC topologies, circuit strategies and synthesis methods, specially suited for multi-standard wireless telecom systems and future Software-defined-radios (SDRs) integrated in nanoscale CMOS. It is a practical book, going from basic concepts to the frontiers of SDM architectures and circuit implementations, which are explained in a didactical and systematic way. It gives a comprehensive overview of the state-of-the-art performance, challenges and practical solutions, providing the necessary insight to implement successful design, through an efficient design and synthesis methodology. Readers will learn a number of practical skills – from system-level design to experimental measurements and testing.

Download or read book Continuous Time Low Pass Filters for Integrated Wideband Radio Receivers written by Ville Saari and published by Springer Science & Business Media. This book was released on 2012-03-15 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new filter design approach and concentrates on the circuit techniques that can be utilized when designing continuous-time low-pass filters in modern ultra-deep-submicron CMOS technologies for integrated wideband radio receivers. Coverage includes system-level issues related to the design and implementation of a complete single-chip radio receiver and related to the design and implementation of a filter circuit as a part of a complete single-chip radio receiver. Presents a new filter design approach, emphasizing low-voltage circuit solutions that can be implemented in modern, ultra-deep-submicron CMOS technologies;Includes filter circuit implementations designed as a part of a single-chip radio receiver in modern 1.2V 0.13um and 65nm CMOS;Describes design and implementation of a continuous-time low-pass filter for a multicarrier WCDMA base-station;Emphasizes system-level considerations throughout.

Download or read book Social Transformation Digital Way written by Jyotsna Kumar Mandal and published by Springer. This book was released on 2018-08-23 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 52nd Annual Convention of the Computer Society of India, CSI 2017, held in Kolkata, India, in January 2018. The 59 revised papers presented were carefully reviewed and selected from 157 submissions. The theme of CSI 2017, Social Transformation – Digital Way, was selected to highlight the importance of technology for both central and state governments at their respective levels to achieve doorstep connectivity with its citizens. The papers are organized in the following topical sections: Signal processing, microwave and communication engineering; circuits and systems; data science and data analytics; bio computing; social computing; mobile, nano, quantum computing; data mining; security and forensics; digital image processing; and computational intelligence.

Download or read book Digitally Assisted Analog and RF CMOS Circuit Design for Software Defined Radio written by Kenichi Okada and published by Springer Science & Business Media. This book was released on 2011-08-26 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the state-of-the-art in RF, analog, and mixed-signal circuit design for Software Defined Radio (SDR). It synthesizes for analog/RF circuit designers the most important general design approaches to take advantage of the most recent CMOS technology, which can integrate millions of transistors, as well as several real examples from the most recent research results.

Download or read book Design of Switched Capacitor Filter Circuits using Low Gain Amplifiers written by Hugo Alexandre de Andrade Serra and published by Springer. This book was released on 2014-11-03 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the design of switched-capacitor filter circuits using low gain amplifiers and demonstrates some techniques that can minimize the effects of parasitic capacitances during the design phase. Focus is given in the design of low-pass and band-pass SC filters, and how higher order filters can be achieved using cascaded biquadratic filter sections. The authors also describe a low voltage implementation of a low-pass SC filter.

Download or read book Innovations in Electrical and Electronic Engineering written by Saad Mekhilef and published by Springer Nature. This book was released on 2022-04-26 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected high-quality papers presented at International Conference on Electrical and Electronics Engineering (ICEEE 2022), jointly organized by University of Malaya and Bharath Institute of Higher Education and Research India during January 8–9, 2022, at NCR New Delhi, India. The book focuses on current development in the fields of electrical and electronics engineering. The book one covers electrical engineering topics–power and energy including renewable energy, power electronics and applications, control, and automation and instrumentation and book two covers the areas of robotics, artificial intelligence and IoT, electronics devices, circuits and systems, wireless and optical communication, RF and microwaves, VLSI, and signal processing. The book is beneficial for readers from both academia and industry.

Download or read book Implementing Full Duplexing for 5G written by David B. Cruickshank and published by Artech House. This book was released on 2020-05-31 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exciting new book examines the feasibility of using a method of doubling the capacity of cellular networks by simultaneously transmitting and receiving signals at the same frequency, a process known as full duplexing (FD). To realize full duplexing, changes in the hardware of the cell- base stations, relaying equipment, “hot spot” access points and mobile phones are necessary to prevent the hardware’s transmitters from interfering with their own receivers. This requires looking at how to separate the strong transmitted signal from the very weak received signal, a process requiring both hardware (analog) changes and more complex digital signal processing. Different ways of achieving that goal are examined. The books reviews the merits of hardware changes involving new duplexing components that may be different depending on the frequency band and cell hardware being used. Developing full duplex (FD) systems in 5G LTE cellular communications and what can be achieved with ferrite-based circulators in terms of size reduction and performance enhancement, especially at millimetric frequencies, is considered. The relative merits of ferrite and non-ferrite circulators are compared in terms of their fundamental materials and device technologies, such as isolation, insertion loss, bandwidth and non-linearity. FD in the entire 5G cell is also examined and its resulting range of equipment and device communication. This includes front-hauling, more sophisticated back and front-hauling, backhaul beam switching, and cell extenders and relays, all of which could involve FD.

Download or read book Implantable Sensors and Systems written by Guang-Zhong Yang and published by Springer. This book was released on 2018-03-27 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implantable sensing, whether used for transient or long-term monitoring of in vivo physiological, bio-electrical, bio-chemical and metabolic changes, is a rapidly advancing field of research and development. Underpinned by increasingly small, smart and energy efficient designs, they become an integral part of surgical prostheses or implants for both acute and chronic conditions, supporting optimised, context aware sensing, feedback, or stimulation with due consideration of system level impact. From sensor design, fabrication, on-node processing with application specific integrated circuits, to power optimisation, wireless data paths and security, this book provides a detailed explanation of both the theories and practical considerations of developing novel implantable sensors. Other topics covered by the book include sensor embodiment and flexible electronics, implantable optical sensors and power harvesting. Implantable Sensors and Systems – from Theory to Practice is an important reference for those working in the field of medical devices. The structure of the book is carefully prepared so that it can also be used as an introductory reference for those about to enter into this exciting research and developing field.