Download or read book Analog Electronics for Measuring Systems written by Davide Bucci and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many instrumentation engineers and scientists often deal with analog electronic issues when approaching delicate measurements. Even if off-the-shelf measuring solutions exist, comprehension of the analog behavior of the measuring system is often a necessity. This book provides a concise introduction to the main elements of a low frequency analog acquisition chain. It aims to be sufficiently general to provide an introduction, yet specific enough to guide the reader through some classical problems that may be encountered in the subject. Topics include sensors, conditioning circuits, differential and instrumentation amplifiers, active filters (mainly for anti-aliasing purposes) and analog to digital converters. A chapter is devoted to an introduction to noise and electronic compatibility. This work is intended for people with a general background in electronics and signal processing, who are looking for an introduction to classical electronic solutions employed in measuring instruments involving low frequency analog signal processing.

Download or read book Measuring Electronics and Sensors written by Herbert Bernstein and published by Springer Nature. This book was released on 2021-11-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an insight into today's operational measurement technology including analysis technology, without claiming to be complete. For the student, the book is an introduction in addition to the relevant textbooks and manuals. It gives the engineer in the profession a quick overview of measurement methods and instruments not familiar to him. In this book not only the components of measurement technology are presented transparently, but also the analog components that are necessary for the construction of measurement and control systems. The theoretical basics and the measuring methods are as much a part of the book as the description of systems, devices and measuring equipment. By indicating measuring ranges and error limits, additional reference points for the application are given, whereby the values mentioned are to be regarded as minimum values due to the constant technical development. This book is a translation of the original German 1st edition Messelektronik und Sensoren by Herbert Bernstein, published by Springer Fachmedien Wiesbaden GmbH, part of Springer Nature in 2014. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.

Download or read book Electronics of Measuring Systems written by Tran Tien Lang and published by . This book was released on 1987 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book which deals with the practical aspects of both analogue and digital electronic measuring systems. The author discusses these systems with the designer in mind, giving information which will help readers to use electronic measuring tools in the most effective way.

Download or read book Analog Electronics written by David Crecraft and published by Elsevier. This book was released on 2002-05-21 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The content has been carefully designed to meet the requirements of first and second year students of electronic engineering, communications engineering and telecommunications, following full honours degree programs or two-year courses including HNC/HND. - A completely new analog electronics textbook for the digital age - Coverage ideal for courses with a communications / wireless focus

Download or read book LABORATORY EXPERIMENTS AND PSPICE SIMULATIONS IN ANALOG ELECTRONICS written by L. K. MAHESHWARI and published by PHI Learning Pvt. Ltd.. This book was released on 2006-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This laboratory manual for students of Electronics, Electrical, Instrumentation, Communication, and Computer engineering disciplines has been prepared in the form of a standalone text, offering the necessary theory and circuit diagrams with each experiment. Procedures for setting up the circuits and measuring and evaluating their performance are designed to support the material of the authors' book Analog Electronics (also published by PHI Learning). There are twenty-five experiments. The experiments cover the basic transistor circuits, the linear op-amp circuits, the active filters, the non-linear op-amp circuits, the signal generators, the voltage regulators, the power amplifiers, the high frequency amplifiers, and the data converters. In addition to the hands-on experiments using traditional test equipment and components, this manual describes the simulation of circuits using PSPICE as well. For PSPICE simulation, any available standard SPICE software may be used including the latest version OrCAD V10 Demo software. This feature allows the instructor to adopt a single laboratory manual for both types of experiments.

Download or read book ANALOG ELECTRONICS written by L. K. MAHESWARI and published by PHI Learning Pvt. Ltd.. This book was released on 2009-01-13 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers a comprehensive introduction to a wide, relevant array of topics in analog electronics. It is intended for students pursuing courses in electrical, electronics, computer, and related engineering disciplines. Beginning with a review of linear circuit theory and basic electronic devices, the text moves on to present a detailed, practical understanding of many analog integrated circuits. The most commonly used analog IC to build practical circuits is the operational amplifier or op-amp. Its characteristics, basic configurations and applications in the linear and nonlinear circuits are explained. Modern electronic systems employ signal generators, analog filters, voltage regulators, power amplifiers, high frequency amplifiers and data converters. Commencing with the theory, the design of these building blocks is thoroughly covered using integrated circuits. The development of microelectronics technology has led to a parallel growth in the field of Micro-electromechanical Systems (MEMS) and Nano-electromechanical Systems (NEMS). The IC sensors for different energy forms with their applications in MEMS components are introduced in the concluding chapter. Several computer-based simulations of electronic circuits using PSPICE are presented in each chapter. These examples together with an introduction to PSPICE in an Appendix provide a thorough coverage of this simulation tool that fully integrates with the material of each chapter. The end-of-chapter problems allow students to test their comprehension of key concepts. The answers to these problems are also given.

Download or read book Electronic Measurement Systems written by Anton F. P. van Putten and published by Prentice Hall. This book was released on 1988 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital and Analogue Instrumentation written by Nihal Kularatna and published by IET. This book was released on 2003 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: A substantial update of his earlier IEE book, Modern Electronic Test and Measuring Instruments, the author provides a state-of-the art review of modern families of digital instruments. For each family he covers internal design, use and applications, highlighting their advantages and limitations from a practical application viewpoint.The book also treats new digital instrument families such as DSOs, Arbitrary Function Generators, FFT analysers and many other common systems used by the test engineers, designers and research scientists.

Download or read book Analog Electronics for Radiation Detection written by Renato Turchetta and published by CRC Press. This book was released on 2017-12-19 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Electronics for Radiation Detection showcases the latest advances in readout electronics for particle, or radiation, detectors. Featuring chapters written by international experts in their respective fields, this authoritative text: Defines the main design parameters of front-end circuitry developed in microelectronics technologies Explains the basis for the use of complementary metal–oxide semiconductor (CMOS) image sensors for the detection of charged particles and other non-consumer applications Delivers an in-depth review of analog-to-digital converters (ADCs), evaluating the pros and cons of ADCs integrated at the pixel, column, and per-chip levels Describes incremental sigma–delta ADCs, time-to-digital converter (TDC) architectures, and digital pulse-processing techniques complementary to analog processing Examines the fundamental parameters and front-end types associated with silicon photomultipliers used for single visible-light photon detection Discusses pixel sensors with per-pixel TDCs, channel density challenges, and emerging 3D technologies interconnecting detectors and electronics Thus, Analog Electronics for Radiation Detection provides a single source for state-of-the-art information on analog electronics for the readout of radiation detectors.

Download or read book Methodology for the Digital Calibration of Analog Circuits and Systems written by Marc Pastre and published by Springer Science & Business Media. This book was released on 2006-01-17 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methodology for the Digital Calibration of Analog Circuits and Systems shows how to relax the extreme design constraints in analog circuits, allowing the realization of high-precision systems even with low-performance components. A complete methodology is proposed, and three applications are detailed. To start with, an in-depth analysis of existing compensation techniques for analog circuit imperfections is carried out. The M/2+M sub-binary digital-to-analog converter is thoroughly studied, and the use of this very low-area circuit in conjunction with a successive approximations algorithm for digital compensation is described. A complete methodology based on this compensation circuit and algorithm is then proposed. The detection and correction of analog circuit imperfections is studied, and a simulation tool allowing the transparent simulation of analog circuits with automatic compensation blocks is introduced. The first application shows how the sub-binary M/2+M structure can be employed as a conventional digital-to-analog converter if two calibration and radix conversion algorithms are implemented. The second application, a SOI 1T DRAM, is then presented. A digital algorithm chooses a suitable reference value that compensates several circuit imperfections together, from the sense amplifier offset to the dispersion of the memory read currents. The third application is the calibration of the sensitivity of a current measurement microsystem based on a Hall magnetic field sensor. Using a variant of the chopper modulation, the spinning current technique, combined with a second modulation of a reference signal, the sensitivity of the complete system is continuously measured without interrupting normal operation. A thermal drift lower than 50 ppm/°C is achieved, which is 6 to 10 times less than in state-of-the-art implementations. Furthermore, the calibration technique also compensates drifts due to mechanical stresses and ageing.

Download or read book Analog Circuits and Systems for Voltage Mode and Current Mode Sensor Interfacing Applications written by Andrea De Marcellis and published by Springer Science & Business Media. This book was released on 2011-06-29 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog CMOS Microelectronic Circuits describes novel approaches for analog electronic interfaces design, especially for resistive and capacitive sensors showing a wide variation range, with the intent to cover a lack of solutions in the literature. After an initial description of sensors and main definitions, novel electronic circuits, which do not require any initial calibrations, are described; they show both AC and DC excitation voltage for the employed sensor, and use both voltage-mode and current-mode approaches. The proposed interfaces can be realized both as prototype boards, for fast characterization (in this sense, they can be easily implemented by students and researchers), and as integrated circuits, using modern low-voltage low-power design techniques (in this case, specialist analog microelectronic researchers will find them useful). The primary audience of Analog CMOS Microelectronic Circuits are: analog circuit designers, sensor companies, Ph.D. students on analog microelectronics, undergraduate and postgraduate students in electronic engineering.

Download or read book Analog Electronics for Microcomputer Systems written by Paul F. Goldsbrough and published by Sams Technical Publishing. This book was released on 1983 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electronic Test Instruments written by Robert A. Witte and published by Prentice Hall. This book was released on 2002 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Test Instruments: Analog and Digital Measurements, Second Editionoffers a thorough, unified, up-to-date survey of electronics instrumentation, digital and analog. Start with basic measurement theory, then master all mainstream forms of electronic test equipment through real-world application examples. This new edition is now fully updated for the latest technologies, with extensive new coverage of digital oscilloscopes, power supplies, and more.

Download or read book Analog Electronics written by Ian Hickman and published by Newnes. This book was released on 2013-10-02 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Electronics is an 11-chapter text that covers the significant advances in several aspects of analog electronics, with emphasis on how analog circuits work. The opening chapters consider the passive and active components of analog circuits. The succeeding chapters deal with the amplification of audio-frequency electrical signals and their transformation into sound waves, as well as the passive signal processing and transmission. The discussion then shifts to the active signal processing in frequency and time domain. Other chapters examine the mechanism of radio-frequency circuits, signal sources, and power supplies. The closing chapter tackles the commercial and professional application of electronics. This book will prove useful to engineers, technicians, and students.

Download or read book Analog Devices and Circuits 2 written by Christian Gontrand and published by John Wiley & Sons. This book was released on 2024-04-02 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the end of the Second World War, a new technological trend was born: integrated electronics. This trend relied on the enormous rise of integrable electronic devices. Analog Devices and Circuits is composed of two volumes: the first deals with analog components, and the second with associated analog circuits. The goal here is not to create an overly comprehensive analysis, but rather to break it down into smaller sections, thus highlighting the complexity and breadth of the field. This first volume, after a brief history, describes the two main devices, namely bipolar transistors and MOS, with particular importance given to the modeling aspect. In doing so, we deal with new devices dedicated to radio frequency, which touches on nanoelectronics. We will also address some of the notions related to quantum mechanics. Finally, Monte Carlo methods, by essence statistics, will be introduced, which have become more and more important since the middle of the twentieth century. The second volume deals with the circuits that "use" the analog components that were introduced in Volume 1. Here, a particular emphasis is placed on the main circuit: the operational amplifier.

Download or read book Electronic Measurements and Instrumentation written by J.G. Joshi and published by KHANNA PUBLISHING HOUSE. This book was released on with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of basic measurement system, development in instrumentation systems. It covers both analog and digital instruments in detailed manner. It also provides the information regarding principle, operation and construction of different instruments, recorders and display devices. Special Chapters 4 and 5 are devoted for measurement of electrical and non-elements and data acquisition systems. It gives an exhaustive treatment of different type of controllers used in process control. This book is simple, up-to-date and maintains proper balance between theoretical and practical aspects regarding instrumentation systems. It is useful to Degree and Diploma students in Electronics and Instrumentation Engineering and also useful for AMIE students.

Download or read book Analog Electronics with LabVIEW written by Kenneth L. Ashley and published by Prentice Hall Professional. This book was released on 2002 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: -- Projects include many program files in LabView, Mathcad and SPICE which professionals would not have time to create on their own.-- LabView allows engineers to turn their desktop into the instrument-- Analog circuit design is still vital in building communications devices - the addition of LabView makes this process more precise and time efficientThis book presents a study of analog electronics. It consists of theory and closely coupled experiments, which are based entirely on computer-based data acquisition using LabView. The topics included treat many of the relevant aspects of basic modern electronics.