Download or read book An Investigation of the Optical and Physical Properties of Lead Magnesium Niobate lead Titanate Ceramic written by Michael Christopher Wagner and published by . This book was released on 2020 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the range of applications for electro-optic materials continues to grow, so does the need to identify and characterize new materials with improved electro-optic responses. A promising electro-optic material which has yet to be widely utilized is Lead Magnesium Niobate-Lead Titanate (PMN-PT) ceramic. In an effort to better characterize and understand the material, this work employed FTIR spectroscopy to calculate the refractive index of PMN-PT over a wide range of optical frequencies. Through analysis of interference fringes, the dispersion curve is calculated between 10,500 cm1 and 1200 cm1 (approximately 955 nm and 8.3 Îơm) containing nearly two thousand data points with an assumed accuracy of three decimal places. Additionally, capacitance bridge analysis is used to characterize the effect of temperature on the dielectric constant of PMN-PT. Special attention is given to the relationship of refractive index and dielectric constant so that a temperature study of the dielectric constant can be used to infer additional physical characteristics of PMN-PT.

Download or read book Growth of Optical Quality Lead Magnesium Niobate lead Titanate Thick Films written by Kyle French and published by . This book was released on 2019 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Investigation of the Growth of Lead Magnesium Niobate and Lead Zinc Niobate Lead Titanate Solid Solution Single Crystals by the Bridgeman Technique written by and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: During this program the following milestones were achieved: (1) Developed a method for synthesizing near pyrochlore-free PMNT starting material for crystal growth using the Columbite process and Pb3O4. Pyrochlore-free starting material prevents the crystals from sticking to the walls of the Pt crucibles and thereby prevents some forms of cracking. An another important development was the use of commercial magnesium niobate that reduced the number of processing steps and time by 50%. (2) Measured the liquidus curve in the PMN-PT phase diagram system for the first time. (3) Grew the first large PNM and PMN 10PT single crystals from nonfluxed melts by the Bridgman method during the first year and had their properties measured. These crystals grew along the 111 direction, their fast growth axis and their properties were consistent with literature values, (4) Grew large, transparent one inch diameter boules of PMN-3PT and PMN-32PT crystals using seed crystals for evaluation of compositional and structural uniformity, crystalline defects, etc. Uniform axial and radial composition was found in one cm diameter boules but axial Ti concentration variations were over 10% in one inch diameter crystals. Samples have been submitted for property measurements and evaluation to NUWC, Tetrad, Washington State University, Penn State University, Hewlett Packard, Wilcoxon, etc. It was found that the properties of the tetragonal PMNT phase (greater than 35% Ti) were not as good as those for rhombohedral crystals.

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.

Download or read book A Study of the Phase Transition Characteristics of Doped Lead Magnesium Niobate Lead Titanate Relaxor Ferroelectrics written by Edgar Robert Seydel and published by . This book was released on 1996 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crystal Optics Properties and Applications written by Ashim Kumar Bain and published by John Wiley & Sons. This book was released on 2019-05-29 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the properties and applications of photo-elastic, acousto-optic, magneto-optic, electro-optic, and photorefractive materials This book deals with the basic physical properties and applications of photo-elastic, acousto-optic, magneto-optic, electro-optic, and photorefractive materials. It also provides up-to-date information on the design and applications of various optoelectronic devices based on these materials. The first chapter of Crystal Optics: Properties and Applications covers the basic concepts of crystal optics, such as index ellipsoid or optical indicatrix, crystal symmetry, wave surface, birefringence, and the polarization of light. Chapter 2 reviews the physical phenomena of crystal optics in isotropic and crystalline materials. It describes in detail research information on modern photoelastic materials and reviews the up-to-date photoelastic device applications. Chapter 3 develops the underlying theory of acousto-optics from first principles, formulating results suitable for subsequent calculations and design. The fourth chapter describes the basic principles of magneto-optic effects and mode of interaction with magnetic materials. The fifth chapter provides an understanding of the physical phenomenon of the linear and quadratic electro-optic effects in isotropic and crystalline materials. The last chapter collects many of the most important recent developments in photorefractive effects and materials, and pays special attention to recent scientific findings and advances on photorefractive materials and devices. -Features up to date information on the design and applications of various optoelectronic devices -Looks at the basic concepts of crystal optics, including the polarization of light, effects of reflection and transmission of polarization and light polarizing devices, and more -Pays special attention to design procedures for the entire range of acousto-optic devices and various applications of these devices -Provides research information on modern magneto-optic materials and reviews the up-to-date magneto-optic device applications?up to terahertz (THz) regime Crystal Optics: Properties and Applications is an excellent book for the scientific community working in the field, including researchers, lecturers, and advanced students.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ferroelectrics Literature Index written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on ferroelectricity and ferroelectric materials started in 1920 with the discovery by Valasek that the variation of spontaneous polarization in Rochelle salt with sign and magnitude of an applied electric field traced a complete and reproducible hysteresis loop. Activity in the field was sporadic until 1935, when Busch and co-workers announced the observation of similar behavior in potassium dihydrogen phosphate and related compounds. Progress thereafter continued at a modest level with the undertaking of some theoretical as well as further experimental studies. In 1944, von Hippel and co-workers discovered ferroelectricity in barium titanate. The technological importance of ceramic barium titanate and other perovskites led to an upsurge of interest, with many new ferroelectrics being identified in the following decade. By 1967, about 2000 papers on various aspects of ferroelectricity had been published. The bulk of this widely dispersed literature was concerned with the experimental measurement of dielectric, crystallographic, thermal, electromechanical, elastic, optical, and magnetic properties. A critical and excellently organized cpmpilation based on these data appeared in 1969 with the publica tion of Landolt-Bornstein, Volume 111/3. This superb tabulation gave instant access to the results in the literature on nearly 450 pure substances and solid solutions of ferroelectric and antiferroelectric materials. Continuing interest in ferroelectrics, spurred by the growing importance of electrooptic crystals, resulted in the publication of almost as many additional papers by the end of 1969 as had been surveyed in Landolt-Bornstein.

Download or read book Ferroelectric Materials and Ferroelectricity written by T. F. Connolly and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a joint effort of the Research Materials Information Center (RMIC) of the Solid State Division at Oak Ridge National Laboratory and the Libraries and Information Systems Center at Bell Telephone Laboratories (BTL) Murray Hill, N. J. The Research Materials Information Center has, since 1963, been answering inquiries on the avail ability, preparation, and properties of inorganic solid-state research materials. The preparation of bibliographies has been essential to this function, and the interest in ferroelectrics led to the compila tion of the journal and report literature on that subject. The 1962 book Ferroelectric Crystals, by Jona and Shirane, was taken as a cutoff point, and all papers through mid-1969 received by the Center have been included. The Libraries and Information Systems Center of BTL has, over a period of years, developed a proprie tary package of computer programs called BELDEX, which formats and generates indexes to biblio graphic material. This group therefore undertook to process RMIC's ferroelectric references by BELDEX so that both laboratories could have the benefit of an indexed basic bibliography in this important research area.

Download or read book Nano Bio Electronic Photonic and MEMS Packaging written by C. P.(Ching-Ping) Wong and published by Springer Nature. This book was released on 2021-03-17 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how nanofabrication techniques and nanomaterials can be used to customize packaging for nano devices with applications to electronics, photonics, biological and biomedical research and products. It covers topics such as bio sensing electronics, bio device packaging, MEMS for bio devices and much more, including: Offers a comprehensive overview of nano and bio packaging and their materials based on their chemical and physical sciences and mechanical, electrical and material engineering perspectives; Discusses nano materials as power energy sources, computational analyses of nano materials including molecular dynamic (MD) simulations and DFT calculations; Analyzes nanotubes, superhydrophobic self-clean Lotus surfaces; Covers nano chemistry for bio sensor/bio material device packaging. This second edition includes new chapters on soft materials-enabled packaging for stretchable and wearable electronics, state of the art miniaturization for active implantable medical devices, recent LED packaging and progress, nanomaterials for recent energy storage devices such as lithium ion batteries and supercapacitors and their packaging. Nano- Bio- Electronic, Photonic and MEMS Packaging is the ideal book for all biomedical engineers, industrial electronics packaging engineers, and those engaged in bio nanotechnology applications research.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedia of Optical and Photonic Engineering Print Five Volume Set written by Craig Hoffman and published by CRC Press. This book was released on 2015-09-22 with total page 3726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of the Encyclopedia of Optical and Photonic Engineering provided a valuable reference concerning devices or systems that generate, transmit, measure, or detect light, and to a lesser degree, the basic interaction of light and matter. This Second Edition not only reflects the changes in optical and photonic engineering that have occurred since the first edition was published, but also: Boasts a wealth of new material, expanding the encyclopedia’s length by 25 percent Contains extensive updates, with significant revisions made throughout the text Features contributions from engineers and scientists leading the fields of optics and photonics today With the addition of a second editor, the Encyclopedia of Optical and Photonic Engineering, Second Edition offers a balanced and up-to-date look at the fundamentals of a diverse portfolio of technologies and discoveries in areas ranging from x-ray optics to photon entanglement and beyond. This edition’s release corresponds nicely with the United Nations General Assembly’s declaration of 2015 as the International Year of Light, working in tandem to raise awareness about light’s important role in the modern world. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Download or read book Electro optic and Photorefractive Materials written by Peter Günter and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is based on lectures and contributed papers presented at the Eleventh Course of the International School of Materials Science and Tech nology that was held in Erice, Sicily, Italy at the Ettore Majorana Center for Scientific Culture during the period 6-17 July 1986. The subject of the course was "Electro-optic and Photorefractive Materials: Applications in Sig nal Processing and Phase Conjugation" . The fields of electro-optics and photorefraction have developed rapidly since the invention of lasers just over twenty-five years ago. The possibil of altering the optical properties of a material by electric fields or by ity optical waves is of great importance for both pure science and for practical applications such as optical signal processing, telecommunications and opti cal display devices. These effects allow us to manipulate (modulate, deflect) and process a given light wave. Modulation, deflection and processing of light waves by means of the electro-optic effect is of fundamental importance in fiber optic telecommuniC1. tions and sensor systems w here the light signals can be processed prior or subsequent to transmission through the fibers. Thin film electro-optic materials with suitable electrode arrays on· the surface of the wave-guiding structures result in a technology often referred to as inte grated optics. In principle, integrated optics devices allow miniaturization and integration of many operations onto a single chip. The photorefractive effect, defined as a photo-induced change of the in dices of refraction, was the other topic treated in this course.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 1812 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Thickness and Surface Roughness on Ferroelectric Behavior of Lead Magnesium Niobate Titanate and Lead Indium Niobate Magnesium Niobate Titanate Single Crystal written by Samuel Taylor and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lead magnesium niobate-titanate, Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT), and lead indium niobate-magnesium niobate-titanate, Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 (PIN-PMN-PT) ferroelectric single crystals are widely used in current and next generation medical ultrasound devices for their high signal strength and high frequency capabilities. With technology innovations, single crystal elements in transducers have become small enough that geometry induced domain clamping can severely limit the dielectric properties of the material and must be taken into consideration. Previous work on single crystal PMN-PT and PIN-PMN-PT has demonstrated that a sample with geometries on the scale of the materials ferroelectric domain size will cause domain clamping. [1] Those studies only evaluated single crystals with polished surface finishes. During preparation of a crystal sample, machining stresses can cause permanent lattice distortions, inducing a surface dead layer, an area of distorted lattice near the surface that is no longer ferroelectric. [2] The geometry induced domain clamping study used samples with essentially no surface dead layer. In medical ultrasounds, the low acoustic impedance of human tissues requires impedance matching layers to be adhered to the crystal surface within the transducer in order to transition the sound wave from the high impedance crystal to the low impedance human tissue. Most bonding techniques require a crystal surface rougher than that obtained from a traditional polishing process. A rougher surface will have high stress introduced deeper into the part due to the machining process. This creates a surface dead layer where the lattice is permanently distorted and no longer exhibits ferroelectric behavior. This will reduce the percent volume of ferroelectric material in the part, reducing overall ferroelectric properties/behavior. In this study, commercial surface finish techniques, including ID saw, wire saw, rough surface grinding and fine surface grinding were used to prepare crystal samples of varying thickness to evaluate the thickness and surface roughness dependence of PMN-PT and PIN-PMT- PT single crystals dielectric properties and ferroelectric behavior. All the samples studied met current commercial matching layer adhesion requirements for surface roughness. The ferroelectric crystals were polarized under both DC and AC fields. Electrical properties were measured after DC poling and AC poling. AC poling response was measured to observe the polarization hysteresis behavior of each sample. The primary electrical properties of interest were the thickness mode electromechanical coupling coefficient (kt), strain free component of the relative dielectric permittivity ([epsilon]r) and the coercive field (Ec), as well as the general shape and evolution of the polarization hysteresis loop through multiple measurements. With the ID sawn, wire sawn and rough surface finishes, both PMN-PT and PIN-PMN-PT crystals exhibited thickness dependent domain impingement. PMN-PT samples showed decreased [epsilon]r and non-characteristic PE hysteresis below 350[mu]m thickness. Although PIN-PMN-PT samples showed degradation in the ferroelectric hysteresis loop at thicknesses just below bulk thickness, [epsilon]r was maintained for samples of at least 400[mu]m thickness. For both crystal compositions, the surface dead layer occupied enough volume to result in a measurable detrimental effect on poling and electrical properties. The effects of the surface dead layer on ferroelectric behavior of the crystal samples were similar to the dimensional pinning of domains in thin polished samples of PMN-PT. With similar surface preparation, PIN-PMN-PT crystals also exhibited low properties, unlike in a polished sample. Using a fine grind technique, thin samples of PIN-PMN-PT could be poled and still maintain normal bulk properties and polarization behavior. This research focused on crystals with compositions near the morphotrophic phase boundary (MPB). This study concluded that in commercially processed PIN-PMN-PT and PMN-PT crystal samples, the main contributing factor to domain impingement is the surface dead layer, not the part geometry. As the surface finish is improved, the lattice damage caused by machining stress is reduced, therefore reducing the depth of the surface dead layer into the sample and reducing the overall volume percent of the sample that cannot be poled. As surface machining techniques are refined, creating a smoother surface, geometry induced domain impingement starts to play a larger role in ferroelectric behavior.

Download or read book Structural Dielectric and Vibrational Studies of Lead Magnesium Niobate Lead Titanate 1 x PbMg1 3Nb2 3O3 xPbTiO3 Solied Solutions written by Aneta Słodczyk and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: