Download or read book An Investigation of Iron Supported on Titania as a Catalyst for Ammonia Synthesis written by Jeannette Santos and published by . This book was released on 1982 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Spectroscopic Properties of Inorganic and Organometallic Compounds written by G Davidson and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopic Properties of Inorganic and Organometallic Compounds provides a unique source of information on an important area of chemistry. Divided into sections mainly according to the particular spectroscopic technique used, coverage in each volume includes: NMR (with reference to stereochemistry, dynamic systems, paramagnetic complexes, solid state NMR and Groups 13-18); nuclear quadrupole resonance spectroscopy; vibrational spectroscopy of main group and transition element compounds and coordinated ligands; and electron diffraction. Reflecting the growing volume of published work in this field, researchers will find this Specialist Periodical Report an invaluable source of information on current methods and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr
Download or read book Metal Support and Metal Additive Effects in Catalysis written by B. Imelik and published by Elsevier. This book was released on 2000-04-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal-Support and Metal-Additive Effects in Catalysis, Volume 11, documents the proceedings of an international symposium organized by the Institut de Recherches sur la Catalyse - CNRS – Villeurbanne and sponsored by the Centre National de la Recherche Scientifique, Ecully (Lyon), September 14-16, 1982. This volume contains 40 manuscripts that cover a wide range of topics. Among these are studies of metal-support interactions involving Pt/Al2O3, Pt/TiO2,Fe/TiO2, Pt/MgO, Rh /Al2O3, and Pt/CeO2 catalysts. There are also separate chapters dealing with ethane, n-butane, and cyclohexane hydrogenolysis; skeletal isomerization of methylpentanes; the catalytic activity and selectivity of noble metals; CO hydrogenation over supported on SiO2, Al2O3, Ti O2,and Zr O2 nickel catalysts; and the role of promoters in Pd catalysts for methanol synthesis. Subsequent chapters cover the poisoning of platinum and nickel by sulfur; C6H6 and CO chemisorption on Pt78Ni22 (111) single crystal alloy; the surface composition of industrial ammonia synthesis catalysts; and the role of alkalis and electronegative promoters on Fe and Ni catalysts.
Download or read book Sustainable Ammonia Production written by Inamuddin and published by Springer Nature. This book was released on 2020-01-09 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents sustainable synthetic pathways and modern applications of ammonia. It focuses on the production of ammonia using various catalytic systems and its use in fuel cells, membrane, agriculture, and renewable energy sectors. The book highlights the history, investigation, and development of sustainable pathways for ammonia production, current challenges, and state-of-the-art reviews. While discussing industrial applications, it fills the gap between laboratory research and viable applications in large-scale production.
Download or read book Fundamentals of Industrial Catalytic Processes written by C. H. Bartholomew and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 1224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is central to the chemical industry, as it is directly or involved in the production of almost all useful chemical products. In this book the authors, present the definitive account of industrial catalytic processes. Throughout Fundamentals of Industrial Catalytic Processes the information is illustrated with many case studies and problems. This book is valuable to anyone wanting a clear account of industrial catalytic processes, but is particularly useful to industrial and academic chemists and engineers and graduate working on catalysis. This book also: Covers fundamentals of catalytic processes, including chemistry, catalyst preparation, properties and reaction engineering. Addresses heterogeneous catalytic processes employed by industry. Provides detailed data on existing catalysts and catalytic reactions, process design and chemical engineering. Covers catalysts used in fuel cells.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1990 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strong Metal support Interactions written by R. T. K. Baker and published by . This book was released on 1986 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pillared Clays and Related Catalysts written by Antonio Gil and published by Springer Science & Business Media. This book was released on 2010-08-28 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first works introducing the aluminum intercalated clay family in the early 1970s, interest in the synthesis of pillared interlayered clays has increased tremendously, especially research into the properties and applications of new synthesis methods. The need for solids that could be used as cracking catalysts with larger pores than zeolitic materials has spurred the synthesis of new porous materials from clays. Pillared Clays and Related Catalysts reviews the properties and applications of pillared clays and other layered materials used as catalysts, focusing on: the acidity of pillared clays and the effect it has on catalytic performance the use of pillared clays as supports for catalytically active phases, and the use of the resulting solids in environmentally friendly reactions the applications of the selective reduction of NOx the comparison between the reactions of pillared clays and anionic clays.
Download or read book Catalysis Looks to the Future written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of catalysis on the nation's economy is evidenced by the fact that catalytic technologies generate U.S. sales in excess of $400 billion per year and a net positive balance of trade of $16 billion annually. This book outlines recent accomplishments in the science and technology of catalysis and summarizes important likely challenges and opportunities on the near horizon. It also presents recommendations for investment of financial and human resources by industry, academe, national laboratories, and relevant federal agencies if the nation is to maintain continuing leadership in this fieldâ€"one that is critical to the chemical and petroleum processing industries, essential for energy-efficient means for environmental protection, and vital for the production of a broad range of pharmaceuticals.
Download or read book Supported Catalysts and Their Applications written by David C Sherrington and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to improve both the efficiency and environmental acceptability of industrial processes is driving the development of heterogeneous catalysts across the chemical industry, including commodity, specialty and fine chemicals and in pharmaceuticals and agrochemicals. Drawing on international research, Supported Catalysts and their Applications discusses aspects of the design, synthesis and application of solid supported reagents and catalysts, including supported reagents for multi-step organic synthesis; selectivity in oxidation catalysis; mesoporous molecular sieve catalysts; and the use of Zeolite Beta in organic reactions. In addition, the two discrete areas of heterogeneous catalysis (inorganic oxide materials and polymer-based catalysts) that were developing in parallel are now shown to be converging, which will be of great benefit to the whole field. Providing a snapshot of the state-of-the-art in this fast-moving field, this book will be welcomed by industrialists and researchers, particularly in the agrochemicals and pharmaceuticals industries.
Download or read book Advances in Catalysis written by and published by Academic Press. This book was released on 1989-08-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Catalysis
Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1980 with total page 1280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directory of Graduate Research written by American Chemical Society. Committee on Professional Training and published by . This book was released on 1983 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Recent Awards in Engineering written by and published by . This book was released on 1983 with total page 986 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book M ssbauer Handbooks written by and published by . This book was released on 1993 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
