Download or read book An investigation into offshoring and backshoring in the German automotive industry written by Rüdiger Holz and published by GRIN Verlag. This book was released on 2011-01-24 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2009 in the subject Business economics - Business Management, Corporate Governance, Swansea University, language: English, abstract: Domestic market stagnation, cost pressures, intensified international competition and chances of emerging markets, have forced the German automotive industry to utilize international location advantages and thus production relocations have become the main strategy to survive in a globalized automotive market. These relocation activities are often viewed as being one-way directed and affected jobs are perceived as being permanent losses for the domestic economy. But in reality, relocation activities are becoming increasingly dynamic and since the turn of the century, more and more cases have been discovered, involving businesses that are returning their productions from abroad. This study has involved exhaustive research to investigate the current scope and scale of Offshoring and Backshoring activities within the German automotive industry and its impact to the domestic labour market by means of a questionnaire survey. The results of the more than two hundred survey responses show that Offshoring activities continue to proceed and a strong shift in Offshoring activities at present takes place from the Eastern European to Asian regions, resulting in agglomeration, “band wagon” effects as well as excess capacities especially in the Chinese market. The study further shows that relocation activities in the automotive industry nowadays do not necessarily result in higher earnings and constant cost savings but rather contribute to an increased competitiveness and to the future survival of the company. Beside ongoing factor price equalization within the age of globalization, a trend in Backshoring activities as stipulated by the media could not be observed so far. Above all, this can be drawn back on the high cost of Offshoring activities and low profit margins within the industry. The findings of the study further concluded that Offshoring has indirectly contributed to the safeguarding of productive and especially non productive jobs at the domestic locations. Although anticipated by press and media, Backshoring does not have any impacts on the domestic labour market.
Download or read book An Investigation Into Offshoring and Backshoring in the German Automotive Industry written by Rûdiger Holz and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reshoring of Manufacturing written by Alessandra Vecchi and published by Springer. This book was released on 2017-07-10 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines key aspects of the increasingly important phenomenon of reshoring – the decision of companies to reverse offshoring by bringing manufacturing back from overseas. The aim is to equip readers with a full understanding of the current extent of reshoring, its drivers, and the associated opportunities and challenges. The impact of governments’ economic policies on the location choices of entrepreneurs in an era of globalization is carefully analyzed, drawing on experiences in the United States and Italy, where contrasting encouragement is provided for reshoring decisions. The effect on reshoring of recent developments regarding technology, the environment, and other factors is assessed in depth, and readers will also find close scrutiny of the relationship between reshoring and manufacturing performance. The book will be of interest to all academics, researchers, and practitioners with an interest in the manufacturing industry and will be an excellent teaching aid for a variety of courses in different disciplines at both undergraduate and postgraduate level.
Download or read book Breaking up the Global Value Chain written by Torben Pedersen and published by Emerald Group Publishing. This book was released on 2017-08-18 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent developments are challenging the traditional separation between advanced and emerging economies as host of knowledge and production-intensive activities, respectively. Authors assess whether the co-location of R&D and manufacturing is critical for development and innovation.
Download or read book Global Perspectives on Achieving Success in High and Low Cost Operating Environments written by Roos, Göran and published by IGI Global. This book was released on 2014-03-31 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Competing in both high and low-cost operating environments can present a number of unique challenges. In light of global competition and the changing scope of various industries due to technological advancement, these challenges must be addressed in order to ensure business success. Global Perspectives on Achieving Success in High and Low Cost Operating Environments features a collection of research and case studies addressing contemporary issues surrounding operational success in various regions. Business professionals, managers, academics, and upper-level students will find this publication an essential resource for the latest tools and solutions for managing operations in diverse operating environments.
Download or read book Geo Regional Competitiveness in Central and Eastern Europe the Baltic Countries and Russia written by Zhuplev, Anatoly and published by IGI Global. This book was released on 2014-05-31 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing dynamics in the European region and beyond, the unfolding political-economic challenges across the European Union, and the rising global power of emerging economic powers require knowledge, skills, and methodological platforms inducing strategies and operations in the new and ever-changing business landscape. Geo-Regional Competitiveness in Central and Eastern Europe, the Baltic Countries, and Russia seeks to address East Central Europes (ECE), the Baltics, and Russias increasingly important roles as emerging markets and competitive economic players in the European region. This premier reference work is designated for scholars, professionals, government agencies, think tanks, and other individuals, organizations, and institutions interested in gaining a deeper understanding of the geo-regional strategic business dynamics and landscape involving ECE, the Baltics, and Russia.
Download or read book Handbook of Research on Applied AI for International Business and Marketing Applications written by Christiansen, Bryan and published by IGI Global. This book was released on 2020-09-25 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial intelligence (AI) describes machines/computers that mimic cognitive functions that humans associate with other human minds, such as learning and problem solving. As businesses have evolved to include more automation of processes, it has become more vital to understand AI and its various applications. Additionally, it is important for workers in the marketing industry to understand how to coincide with and utilize these techniques to enhance and make their work more efficient. The Handbook of Research on Applied AI for International Business and Marketing Applications is a critical scholarly publication that provides comprehensive research on artificial intelligence applications within the context of international business. Highlighting a wide range of topics such as diversification, risk management, and artificial intelligence, this book is ideal for marketers, business professionals, academicians, practitioners, researchers, and students.
Download or read book SPS2022 written by A.H.C. Ng and published by IOS Press. This book was released on 2022-05-17 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realization of a successful product requires collaboration between developers and producers, taking account of stakeholder value, reinforcing the contribution of industry to society and enhancing the wellbeing of workers while respecting planetary boundaries. Founded in 2006, the Swedish Production Academy (SPA) aims to drive and develop production research and education and to increase cooperation within the production area. This book presents the proceedings of the 10th Swedish Production Symposium (SPS2022), held in Skövde, Sweden, from 26-29 April 2022. The overall theme of the symposium was ‘Industry 5.0 Transformation – Towards a Sustainable, Human-Centric, and Resilient Production’. Since its inception in 2007, the purpose of SPS has been to facilitate an event at which members and interested participants from industry and academia can meet to exchange ideas. The 69 papers accepted for presentation here are grouped into ten sections: resource-efficient production; flexible production; humans in the production system; circular production systems and maintenance; integrated product and production development; industrial optimization and decision-making; cyber-physical production systems and digital twins; innovative production processes and additive manufacturing; smart and resilient supply chains; and linking research and education. Also included are three sections covering the Special Sessions at SPS2022: artificial intelligence and industrial analytics in industry 4.0; development of resilient and sustainable production systems; and boundary crossing and boundary objects in product and production development. The book will be of interest to all those involved in the development and production of future products.
Download or read book Relocation Offshoring and Labour Market Repercussions The Case of the German Automobile Industry in Central Europe written by Peter Nunnenkamp and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.
Download or read book An analysis of risks and chances for the German automotive supplier industry within the Chinese market written by Felix Emmerich and published by GRIN Verlag. This book was released on 2008-06-27 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research Paper (undergraduate) from the year 2008 in the subject Business economics - General, grade: 2,0, University of Cooperative Education (VWA Stuttgart (BA)), language: English, abstract: “China – big but not easy” (1) titled the Automotive Industries Magazine in its July 2005 issue, reporting about the German premium car manufacturer Audi, who is manufacturing in China since 1999. This simple statement breaks down the risks and opportunities for the German automotive supplier industry in China into two keywords. The first one is “big”: in the last decades, the eyes of the world’s automotive supplier industry have been directed to China, because it is promising to be the world’s biggest market soon. Given the fact that one fifth of mankind lives in China and its standard of living is rapidly improving, it is only a question of time until the promise becomes real. In addition to this enormous sales potential, the advantages of cheap labor and an improving level of technology and education show China’s attractive sourcing potential. The second one is “not easy”: exploiting this potential and taking part in the growth comes with a variety of challenges to the foreign suppliers: a completely different culture, a dynamic and highly competitive market and a political-legal system that favors its home industry over the foreigners – only to name a few. Although this paper is concerned with the German automotive suppliers in particular, it is inevitable to draw a complete picture of the country in general and the situation of the automotive manufacturers, which are in many areas the driving force behind the supplier’s activities. So the first chapters describe the market environment, progressing from the general to the specific and providing the framework necessary for the in-depth analysis of risks and opportunities. These are separated into internal and external aspects. Internal risks and opportunities derive from the weaknesses and strengths of a company itself. The external risks and opportunities in contrast can hardly be influenced by the suppliers as they are effects of the political and economical development. But the suppliers can develop strategies to adapt: using the opportunities and avoiding the risks! So, the aim of this paper is to show why China is such an important but difficult market for the German automotive suppliers and – as a conclusion – to give recommendations and strategies for being Successful in China. (1) Wessel-Aas (2005), p.1
Download or read book Managing in a VUCA World written by Oliver Mack and published by Springer. This book was released on 2015-07-15 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines volatility, uncertainty, complexity and ambiguity (VUCA) and addresses the need for broader knowledge and application of new concepts and frameworks to deal with unpredictable and rapid changing situations. The premises of VUCA can shape all aspects of an organization. To cover all areas, the book is divided into six sections. Section 1 acts as an introduction to VUCA and complexity. It reviews ways to manage complexity, while providing examples for tools and approaches that can be applied. The main focus of Section 2 is on leadership, strategy and planning. The chapters in this section create new approaches to handle VUCA environments pertaining to these areas including using the Tetralemma logics, tools from systemic structural constellation (SySt) approach of psychotherapy and organizational development, to provide new ideas for the management of large strategic programs in organizations. Section 3 considers how marketing and sales are affected by VUCA, from social media’s influence to customer value management. Operations and cost management are highlighted in Section 4. This section covers VUCA challenges within global supply chains and decision-oriented controlling. In Section 5 organizational structure and process management are showcased, while Section 6 is dedicated to addressing the effects of VUCA in IT, technology and data management. The VUCA forces present businesses with the need to move from linear modes of thought to problem solving with synthetic and simultaneous thinking. This book should help to provide some starting points and ideas to deal with the next era. It should not be understood as the end of the road, but as the beginning of a journey exploring and developing new concepts for a new way of management.
Download or read book Novel Sustainable Alternative Approaches for the Textiles and Fashion Industry written by Subramanian Senthilkannan Muthu and published by Springer Nature. This book was released on 2023-09-26 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental impacts created by the textiles and fashion sector are well known and acknowledged by various stakeholders involved in the entire supply chain. The entire lifecycle of textile products creates various impacts to the environment and hence any attempts to alleviate the impacts are highly welcomed. The whole sector is keen to investigate novel sustainable alternatives in terms of raw materials, processes, approaches to make the entire textiles and fashion sector more sustainable. This broad title of novel sustainable alternatives can be split into three subtopics: novel raw material alternatives, novel process alternative and novel alternative approaches. This volume is dedicated to deal with the novel sustainable alternative approaches for the textiles and fashion industry.
Download or read book The Routledge Companion to Production and Operations Management written by Martin K. Starr and published by Routledge. This book was released on 2017-03-27 with total page 1264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This remarkable volume highlights the importance of Production and Operations Management (POM) as a field of study and research contributing to substantial business and social growth. The editors emphasize how POM works with a range of systems—agriculture, disaster management, e-commerce, healthcare, hospitality, military systems, not-for-profit, retail, sports, sustainability, telecommunications, and transport—and how it contributes to the growth of each. Martin K. Starr and Sushil K. Gupta gather an international team of experts to provide researchers and students with a panoramic vision of the field. Divided into eight parts, the book presents the history of POM, and establishes the foundation upon which POM has been built while also revisiting and revitalizing topics that have long been essential. It examines the significance of processes and projects to the fundamental growth of the POM field. Critical emerging themes and new research are examined with open minds and this is followed by opportunities to interface with other business functions. Finally, the next era is discussed in ways that combine practical skill with philosophy in its analysis of POM, including traditional and nontraditional applications, before concluding with the editors’ thoughts on the future of the discipline. Students of POM will find this a comprehensive, definitive resource on the state of the discipline and its future directions.
Download or read book An Investigation of the Development of Purchasing and Its Performance written by Alexander Klaus and published by . This book was released on 2010 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industry 4 0 and Regional Transformations written by Lisa De Propris and published by Routledge. This book was released on 2020-04-07 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume brings together a group of expert contributors to explorebthe opportunities and the challenges that Industry 4.0 (smart manufacturing) is likely to pose for regions, fi rms and jobs in Europe. Drawing on theory and empirical cases, it considers emerging issues like servitization, new innovation models for local production systems and the increase in reshoring. Industry 4.0 and Regional Transformations captures the complexity of this new manufacturing model in an accessible way and considers its implications for the future. It will be essential reading for advanced students and researchers and policy makers in regional studies, industrial policy, economic geography, innovation studies, operations management and engineering.
Download or read book The Innovativeness of the German Automotive Industry as a Lever for Employment and Wealth of Nation written by Günter Hofbauer and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovativeness is a prerequisite for profitable companies as well as for a sustainable economy. Innovations are the adequate response in times of rising competitive pressure and increasing rivalry on the global markets. Additionally, the shut down due to the global pandemic has hit all automotive companies extremely hard. Currently there are unmistakable signals in evidence indicating a radical technological change coming along with an economic downturn in the automotive industry. The research question examines the innovativeness of the German automotive industry. The answer will be given with selected figures referring to qualitative and quantitative reasoning. In summary it can be stated that the German automotive industry has an outstanding performance in terms of innovativeness. The urgent need to support this industry can easily be derived.