Download or read book Water and Wastewater Engineering written by Mackenzie L Davis and published by McGraw Hill Professional. This book was released on 2010-04-05 with total page 1296 pages. Available in PDF, EPUB and Kindle. Book excerpt: An In-Depth Guide to Water and Wastewater Engineering This authoritative volume offers comprehensive coverage of the design and construction of municipal water and wastewater facilities. The book addresses water treatment in detail, following the flow of water through the unit processes and coagulation, flocculation, softening, sedimentation, filtration, disinfection, and residuals management. Each stage of wastewater treatment--preliminary, secondary, and tertiary--is examined along with residuals management. Water and Wastewater Engineering contains more than 100 example problems, 500 end-of-chapter problems, and 300 illustrations. Safety issues and operation and maintenance procedures are also discussed in this definitive resource. Coverage includes: Intake structures and wells Chemical handling and storage Coagulation and flocculation Lime-soda and ion exchange softening Reverse osmosis and nanofiltration Sedimentation Granular and membrane filtration Disinfection and fluoridation Removal of specific constituents Drinking water plant residuals management, process selection, and integration Storage and distribution systems Wastewater collection and treatment design considerations Sanitary sewer design Headworks and preliminary treatment Primary treatment Wastewater microbiology Secondary treatment by suspended and attached growth biological processes Secondary settling, disinfection, and postaeration Tertiary treatment Wastewater plant residuals management Clean water plant process selection and integration
Download or read book An Introduction to Water and Wastewater Engineering written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-20 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and environmental engineers and other professional engineers and construction managers interested in domestic water treatment and wastewater collection and treatment. Here is what is discussed: 1. ACTIVATED SLUDGE WASTEWATER TREATMENT PLANTS 2. ADVANCED WASTEWATER TREATMENT 3. AREA DRAINAGE SYSTEMS 4. DOMESTIC WASTEWATER TREATMENT 5. DOMESTIC WATER DISTRIBUTION 6. DOMESTIC WATER TREATMENT 7. HYDRAULIC DESIGN DATA FOR CULVERTS 8. HYDRAULIC DESIGN OF SEWERS 9. LOW IMPACT DEVELOPMENT 10. OILY WASTEWATER COLLECTION AND TREATMENT 11. DRAINAGE PIPE STRENGTH, COVER AND BEDDING 12. PRELIMINARY WASTEWATER TREATMENT 13. PRIMARY WASTEWATER TREATMENT 14. PUMPING STATIONS FOR WATER SUPPLY SYSTEMS 15. SLUDGE HANDLING, TREATMENT AND DISPOSAL 16. SMALL FLOW WASTE TREATMENT SYSTEMS 17. TREATED WATER STORAGE 18. WASTEWATER COLLECTION AND PUMPING.
Download or read book Water and Wastewater Engineering written by Sudha Goel and published by Cambridge University Press. This book was released on 2019-08-31 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive textbook highlights the fundamental concepts and design principles related to water and wastewater engineering. Problems and issues arising from the lack of sustainable conventional treatment practices and potential methods for resolving problems are discussed in detail. The book starts with an introduction to water resources and the need for water and wastewater treatment, followed by evaluation of water demand in terms of quantity and quality. Mass transfer and transformation processes that are necessary for understanding the complexity of water pollution issues and treatment processes are discussed in detail. Pedagogical features include learning objectives, chapter-wise study outlines, detailed solutions to important problems and self-evaluation exercises with answers. Case studies for specific water treatment requirements are provided to enable the students to choose and apply only relevant treatment processes in their design.
Download or read book An Introduction to Water and Wastewater Engineering written by J. Paul Guyer and published by Createspace Independent Publishing Platform. This book was released on 2017-08 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for civil engineers and other professional engineers and construction managers interested in water and wastewater engineering. Here is what is discussed: 1. ACTIVATED SLUDGE WASTEWATER TREATMENT PLANTS 2. ADVANCED WASTEWATER TREATMENT 3. AREA DRAINAGE SYSTEMS 4. DOMESTIC WASTEWATER TREATMENT 5. DOMESTIC WATER DISTRIBUTION 6. DOMESTIC WATER TREATMENT 7. HYDRAULIC DESIGN DATA FOR CULVERTS 8. HYDRAULIC DESIGN OF SEWERS 9. LOW IMPACT DEVELOPMENT 10. OILY WASTEWATER COLLECTION AND TREATMENT 11. DRAINAGE PIPE STRENGTH, COVER AND BEDDING 12. PRELIMINARY WASTEWATER TREATMENT 13. PRIMARY WASTEWATER TREATMENT 14. PUMPING STATIONS FOR WATER SUPPLY SYSTEMS 15. SLUDGE HANDLING, TREATMENT AND DISPOSAL 16. SMALL FLOW WASTE TREATMENT SYSTEMS 17. TREATED WATER STORAGE 18. WASTEWATER COLLECTION AND PUMPING.
Download or read book Water and Wastewater Engineering Design Principles and Practice Second Edition written by Mackenzie L. Davis and published by McGraw Hill Professional. This book was released on 2019-10-04 with total page 1349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. A Fully Updated, In-Depth Guide to Water and Wastewater Engineering Thoroughly revised to reflect the latest advances, procedures, and regulations, this authoritative resource contains comprehensive coverage of the design and construction of municipal water and wastewater facilities. Written by an environmental engineering expert and seasoned academic, Water and Wastewater Engineering: Design Principles and Practice, Second Edition, offers detailed explanations, practical strategies, and design techniques as well as hands-on safety protocols and operation and maintenance procedures. You will get cutting-edge information on water quality standards, corrosion control, piping materials, energy efficiency, direct and indirect potable reuse, and more. Coverage includes: • The design and construction processes • General water supply design considerations • Intake structures and wells • Chemical handling and storage • Coagulation and flocculation • Lime-soda and ion exchange softening • Reverse osmosis and nanofiltration • Sedimentation • Granular and membrane filtration • Disinfection and fluoridation • Removal of specific constituents • Water plant residuals management, process selection, and integration • Storage and distribution systems • Wastewater collection and treatment design considerations • Sanitary sewer design • Headworks and preliminary treatment • Primary treatment • Wastewater microbiology • Secondary treatment by suspended growth biological processes • Secondary treatment by attached growth and hybrid biological processes • Tertiary treatment • Advanced oxidation processes • Direct and indirect potable reuse
Download or read book Water Technology written by N. F. Gray and published by . This book was released on 1999 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water and Wastewater Treatment written by Joanne E. Drinan and published by CRC Press. This book was released on 2012-07-20 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lauded for its engaging, highly readable style, the best-selling first edition became the premier guide for nonengineers involved in water and wastewater treatment operations. Water and Wastewater Treatment: A Guide for the Nonengineering Professional, Second Edition continues to provide a simple, nonmathematical account of the unit processes used to treat both drinking water and wastewater. Completely revised and expanded, this second edition adds new material on technological advances, regulatory requirements, and other current issues facing the water and wastewater industries. Using step-by-step, jargon-free language, the authors present all the basic unit processes involved in drinking water and wastewater treatment. They describe each unit process, the function of the process in water or wastewater treatment, and the basic equipment used in each process. They also explain how the processes fit together within a drinking water or wastewater treatment system and discuss the fundamental concepts that constitute water and wastewater treatment processes as a whole. Avoiding mathematics, chemistry, and biology, the book includes numerous illustrations for easy comprehension of concepts and processes. It also contains chapter summaries and an extensive glossary of terms and abbreviations for quick reference.
Download or read book An Introduction to Water and Wastewater Engineering written by J. Paul Guyer and published by Independently Published. This book was released on 2018-04-23 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for civil engineers and other professional engineers and construction managers interested in water and wastewater engineering. Here is what is discussed: 1. ACTIVATED SLUDGE WASTEWATER TREATMENT PLANTS 2. ADVANCED WASTEWATER TREATMENT 3. AREA DRAINAGE SYSTEMS 4. DOMESTIC WASTEWATER TREATMENT 5. DOMESTIC WATER DISTRIBUTION 6. DOMESTIC WATER TREATMENT 7. HYDRAULIC DESIGN DATA FOR CULVERTS 8. HYDRAULIC DESIGN OF SEWERS 9. LOW IMPACT DEVELOPMENT 10. OILY WASTEWATER COLLECTION AND TREATMENT 11. DRAINAGE PIPE STRENGTH, COVER AND BEDDING 12. PRELIMINARY WASTEWATER TREATMENT 13. PRIMARY WASTEWATER TREATMENT 14. PUMPING STATIONS FOR WATER SUPPLY SYSTEMS 15. SLUDGE HANDLING, TREATMENT AND DISPOSAL 16. SMALL FLOW WASTE TREATMENT SYSTEMS 17. TREATED WATER STORAGE 18. WASTEWATER COLLECTION AND PUMPING.
Download or read book An Introduction to Water and Wastewater Treatment for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-06-25 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in domestic water and wastewater treatment. Here is what is discussed: 1. INTRODUCTION, 2. DOMESTIC WATER TREATMENT OVERVIEW, 3. COAGULATION AND FLOCCULATION, 4. HYDROXIDE PRECIPITATION, 5. SULFIDE AND CARBONATE PRECIPITATION, 6. PRELIMINARY WASTEWATER TREATMENT, 7. PRIMARY WASTEWATER TREATMENT, 8. SECONDARY WASTEWATER TREATMENT, 9. ACTIVATED SLUDGE WASTEWATER TREATMENT, 10. ADVANCED WASTEWATER TREATMENT, 11. DESIGN OF WASTEWATER PONDS, 12. WASTEWATER LAND TREATMENT, 13. SLUDGE DISPOSAL.
Download or read book Waste Water Engineering written by Dr. B.C. Punmia and published by Firewall Media. This book was released on 1998 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Environmental Engineering with Unit Conversion Booklet written by Mackenzie L. Davis and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive new edition tackles the multiple aspects of environmental engineering, from solid waste disposal to air and noise pollution. It places a much-needed emphasis on fundamental concepts, definitions, and problem-solving while providing updated problems and discussion questions in each chapter. Introduction to Environmental Engineering also includes a discussion of environmental legislation along with environmental ethics case studies and problems to present the legal framework that governs environmental engineering design.
Download or read book Water and Wastewater Calculations Manual 2nd Ed written by Shun Lin and published by McGraw-Hill Professional. This book was released on 2007-06-26 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quick Access to the Latest Calculations and Examples for Solving All Types of Water and Wastewater Problems! The Second Edition of Water and Wastewater Calculations Manual provides step-by-step calculations for solving a myriad of water and wastewater problems. Designed for quick-and-easy access to information, this revised and updated Second Edition contains over 110 detailed illustrations and new material throughout. Written by the internationally renowned Shun Dar Lin, this expert resource offers techniques and examples in all sectors of water and wastewater treatment. Using both SI and US customary units, the Second Edition of Water and Wastewater Calculations Manual features: Coverage of stream sanitation, lake and impoundment management, and groundwater Conversion factors, water flow calculations, hydraulics in pipes, weirs, orifices, and open channels, distribution, outlets, and quality issues In-depth emphasis on drinking water treatment and water pollution control technologies Calculations specifically keyed to regulation requirements New to this edition: regulation updates, pellet softening, membrane filtration, disinfection by-products, health risks, wetlands, new and revised examples using field data Inside this Updated Environmental Reference Tool • Streams and Rivers • Lakes and Reservoirs • Groundwater • Fundamental and Treatment Plant Hydraulics • Public Water Supply • Wastewater Engineering • Appendices: Macro invertebrate Tolerance List • Well Function for Confined Aquifers • Solubility Product Constants for Solution at or near Room Temperature • Freundlich Adsorption Isotherm Constants for Toxic Organic Compounds • Conversion Factors
Download or read book An Introduction to Domestic Wastewater Treatment for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-05-29 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, environmental engineers and construction managers interested in wastewater treatment. Here is what is discussed: 1. GENERAL, 2. SITE SELECTION, 3. TREATMENT REQUIREMENTS, 4. BASIC DESIGN CONSIDERATIONS.
Download or read book Water technology an introduction for environmental scientists and engineers written by N. F. Gray and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water and wastewater engineering is one of the world's biggest and most interdisciplinary industries, employing chemists, microbiologists, botanists, zoologists as well as engineers, computer specialists and a range of different management professionals. This accessible student textbook provides a broad overview of the sector, introducing the reader to the key concepts of water technology by explaining the fundamentals of hydrobiology, aquatic ecosystems, water and supply and wastewater treatment. In 2000 the Water Framework Directive came into force - this is the most substantial piece of EC water legislation to date. Professor Gray uses the Water Framework Directive as the unifying theme of this new edition taking into account the implications of compliance and practice, as well as discussing the topical issue of sustainable principles in water management.
Download or read book Environmental Engineering for the 21st Century written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-03-08 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental engineers support the well-being of people and the planet in areas where the two intersect. Over the decades the field has improved countless lives through innovative systems for delivering water, treating waste, and preventing and remediating pollution in air, water, and soil. These achievements are a testament to the multidisciplinary, pragmatic, systems-oriented approach that characterizes environmental engineering. Environmental Engineering for the 21st Century: Addressing Grand Challenges outlines the crucial role for environmental engineers in this period of dramatic growth and change. The report identifies five pressing challenges of the 21st century that environmental engineers are uniquely poised to help advance: sustainably supply food, water, and energy; curb climate change and adapt to its impacts; design a future without pollution and waste; create efficient, healthy, resilient cities; and foster informed decisions and actions.
Download or read book An Introduction to Water and Wastewater Treatment for Professional Engineers written by J Paul Guyer and published by Independently Published. This book was released on 2022-06-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in domestic water and wastewater treatment. Here is what is discussed: 1. INTRODUCTION, 2. DOMESTIC WATER TREATMENT OVERVIEW, 3. COAGULATION AND FLOCCULATION, 4. HYDROXIDE PRECIPITATION, 5. SULFIDE AND CARBONATE PRECIPITATION, 6. PRELIMINARY WASTEWATER TREATMENT, 7. PRIMARY WASTEWATER TREATMENT, 8. SECONDARY WASTEWATER TREATMENT, 9. ACTIVATED SLUDGE WASTEWATER TREATMENT, 10. ADVANCED WASTEWATER TREATMENT, 11. DESIGN OF WASTEWATER PONDS, 12. WASTEWATER LAND TREATMENT, 13. SLUDGE DISPOSAL.
Download or read book Water Technology written by Nick Gray and published by CRC Press. This book was released on 2017-11-10 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Water has become one of the most important issues of our time. Career prospects for those working in water and wastewater engineering are expanding, with over 90,000 workers in the water environment industry, and technological developments are rapidly advancing our understanding in this area. This accessible student textbook introduces the reader to the key concepts of water technology by explaining the fundamentals of hydrobiology, aquatic ecosystems, water treatment and supply and wastewater treatment. The Water Framework Directive is the driving force in European water management and protection, and Nick Gray uses this as the unifying theme in this new edition. This text provides a complete introduction to all aspects of managing the hydrological cycle and is ideal for those interested in a career in the water industry. For Masters students in environmental science, engineering and construction courses and those taking the CIWEM diploma, Water Technology is an essential resource they will find useful in their professional careers.
