Download or read book An Introduction to Speciality Polymers written by Norio Ise and published by CUP Archive. This book was released on 1983-08-04 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Polymers Specialty Polymers and Their Applications written by Manas Chanda and published by CRC Press. This book was released on 2008-07-18 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the fourth edition of the well-known Plastics Technology Handbook, Industrial Polymers, Specialty Polymers, and Their Applications covers a wide range of general and special types of polymers
Download or read book Handbook of Specialty Fluorinated Polymers written by Susanta Banerjee and published by William Andrew. This book was released on 2015-04-24 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluoropolymers are used in applications demanding service at enhanced temperature while maintaining their structural integrity and have excellent combination of chemical, physical and mechanical properties. Advancements in materials and processing technology mean that a huge amount of research is currently taking place into new, high performance applications for specialty fluorinated polymers. This book is a complete review of the current research in synthesizing new fluorinated high performance polymers and their application in the field of low dielectric constant materials, membrane based separation (gas and liquid) and proton exchange membranes. Special emphasis is given to the preparation of soluble high performance polymers by incorporating fluorine and different structural elements so as to use these classes of polymers in different membrane based applications, including low dielectric constant materials, gas separation, pervaporation, proton exchange membranes in fuel cells, and more. The coverage of processing properties and commercial aspects - as well as a practical assessment of the advantages and disadvantages of specialty fluoropolymers compared to other materials - enables engineers and product designers to apply the latest scientific developments in this area in a practical setting. Thorough coverage of modern applications for specialty fluorinated polymers, including membranes and coatings – giving insight into recent research and the future direction of this technology Brings researchers and engineers up to date with the latest developments in specialty fluoropolymers, to assist in future materials research and part design Includes detailed assessment of the advantages and shortcomings of specialty fluorinated polymers, for ease of comparison with alternative materials
Download or read book Handbook of Polymers written by George Wypych and published by Elsevier. This book was released on 2022-03-19 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Polymers, Third Edition represents an update on available data, including new values for many commercially available products, verification of existing data, and removal of older data where it is no longer useful. Polymers selected for this edition include all primary polymeric materials used by the plastics and chemical industries and specialty polymers used in the electronics, pharmaceutical, medical and aerospace fields, with extensive information also provided on biopolymers. The book includes data on all polymeric materials used by the plastics industry and branches of the chemical industry, as well as specialty polymers in the electronics, pharmaceutical, medical and space fields. The entire scope of the data is divided into sections to make data comparison and search easy, including synthesis, physical, mechanical, and rheological properties, chemical resistance, toxicity, environmental impact, and more. - Provides key data on all primary polymeric materials used in a wide range of industries and applications - Presents easy-to-access data divided into sections, making comparisons and search simple and intuitive - Includes data on general properties, history, synthesis, structure, physical properties, mechanical properties, chemical resistance, flammability, weather stability, toxicity, and more
Download or read book Biomedical and Pharmaceutical Polymers written by Denis J.-P. Labarre and published by Pharmaceutical Press. This book was released on 2011 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This much needed and timely book will provide students with an introduction to general concepts of polymer science and some insights into speciality polymers. Polymers are becoming increasingly present in the domain of health yet introduction to polymers is not frequently taught. Biomedical and Pharmaceutical Polymers is the only book available for introducing polymers to graduate or post-graduate students who use them in the biomedical and pharmaceutical fields. In four sections the book covers: * why study polymers for the health sciences? * general characteristics of polymers * main methods and processes to synthesize polymers * special properties of polymers The final section of the book also contains case studies and detailed examples of biomedical and pharmaceutical applications. Biomedical and Pharmaceutical Polymers is a user-friendly textbook which will be an essential reference for postgraduate pharmaceutical science students, pharmaceutical scientists worldwide and pharmacy undergraduate students with an interest in polymers.
Download or read book Introduction to Synthetic Polymers written by Ian McIntyre Campbell and published by Oxford University Press, USA. This book was released on 1994 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This clear and concise textbook introduces the huge field of polymer science to students taking degree courses in chemistry, materials science and related subjects covering polymers. By focusing on the few major polymers, for example polystyrene and PVC, which are in common use and which thestudents will recognize, the book illustrates simply the basic principles of polymer science. It looks at the factors which give rise to the special properties of polymers, and emphasizes how polymer molecules can be synthesised with different sizes and architectures to tailor the properties of theresulting material. The later chapters then introduce a wide range of polymers, some with special applications now and others with exciting potential for the future. There are exercises at the end of each chapter.
Download or read book Specialty Polymers written by Faiz Mohammad and published by I. K. International Pvt Ltd. This book was released on 2007 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: The synthetic counterparts of natural polymeric materials are now finding applications as light weight, mechanically strong, and environmentally stable sheets, fibers, films, adhesives, paints, and foams have replaced most of the commodity and structural materials. The systematic research on the preparation, characterization, and utilization of plastics resulted in creation of polymers often containing a set of several desirable properties in a single polymer. The polymers have established their place in engineering applications as well. Although the bulk of plastics production focuses on relatively simple commodity polymers, the proportion of specially designed and tailor-made plastics for specific and sophisticated applications is also increasing at a great pace. The specialty plastics, as well as their use in specific and sophisticated applications, are the key to the continued scientific growth and technological advances in the new millennium. This book thoroughly covers today's rapidly growing field of specialty polymers and their applications in more sophisticated and specialized areas. It gives the most recent in-depth knowledge and extremely comprehensive details of the chemistry, physics, material science, technology, and device applications of specialty polymers. This comprehensive book containing 16 chapters is the result of the untiring efforts of 35 most renowned experts from the national and international scientific community. This book is thought-provoking to the researchers working in the fields of chemistry, biochemistry, biotechnology, medicine, polymer chemistry, semiconductor physics, material science, electrochemistry, biology, electronics, photonics, material science, solid state physics, nanotechnology, electrical and electronics engineering, optical engineering, device engineering, data storage, etc.
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Principles of Polymer Science written by P. Bahadur and published by Alpha Science Int'l Ltd.. This book was released on 2005 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Principles of Polymer Science introduces several basic and advanced aspects of polymers for the undergraduate and graduate students in chemistry, chemical engineering and materials science. The second and thoroughly revised edition includes the technical aspects of synthesis, characterization, behaviour and technology in a straightforward and lucid manner. Separate chapters on natural, inorganic and specialty polymers would attract readers from interdisciplinary courses."--BOOK JACKET.
Download or read book Organic and Physical Chemistry of Polymers written by Yves Gnanou and published by John Wiley & Sons. This book was released on 2008-03-03 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and Physical Chemistry of Polymers provides a thorough introduction to the fundamentals of polymers, including their structure and synthesis as well as their chemical and physical properties. This accessible guide illuminates the increasingly important role of polymers in modern chemistry, beginning with the essentials, then covering thermodynamics, conformation, morphology, and measurements of molar masses; polymerization mechanisms, reaction of polymers, synthesis of block and graft polymers, and complex topologies; and the mechanical properties, rheology, polymer processing, and fabrication of fibers and films.
Download or read book Polymers for Electricity and Electronics written by Jiri George Drobny and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The comprehensive, practical book that explores the principles, properties, and applications of electrical polymers The electrical properties of polymers present almost limitless possibilities for industrial research and development, and this book provides an in-depth look at these remarkable molecules. In addition to traditional applications in insulating materials, wires, and cables, electrical polymers are increasingly being used in a range of emerging technologies. Presenting a comprehensive overview of how electrical polymers function and how they can be applied in the electronics, automotive, medical, and military fields, Polymers for Electricity and Electronics: Materials, Properties, and Applications presents intensive and accessible coverage with a focus on practical applications. Including examples of state-of-the-art scientific issues, the book evaluates new technologies—such as light emitting diodes, molecular electronics, liquid crystals, nanotechnology, optical fibers, and soft electronics—and explains the advantages of conductive polymers as well as their processibility and commercial uses. This book is an essential resource for anyone working with, or interested in, polymers and polymer science. In addition, appendices that detail the electrical properties of selected polymers as well as list additional ASTM and corresponding international testing standards and methods for testing electrical properties are also included.
Download or read book Blends of Natural Rubber written by K.C. Jones and published by Springer Science & Business Media. This book was released on 1997-12-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.
Download or read book Processing of Polymers written by Chris Defonseka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-09-21 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are converted into finished products through a series of steps which include mixing in additives and various types of forming. Following an introduction to polymer science and its importance to various fields, the author describes these processes from a practical, application-oriented perspective. Global suppliers of raw materials, machinery and equipment are also given, making this book an invaluable resource for industry practitioners.
Download or read book Comb Shaped Polymers and Liquid Crystals written by N.A. Platé and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science and Technology written by Joel R. Fried and published by Pearson Education. This book was released on 2014 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text describes how plastics, rubber, and fibers are synthesized, processed into useful materials, characterized, and compounded with fillers and other additives to improve performance for specific applications. Their use in a wide variety of technologies including membrane separations, electronics, and energy production and storage is described. A new chapter in the Third Edition shows how computer correlations and simulations can be used to predict properties of new plastics and to better understand how existing plastics perform.
Download or read book Advanced Polymers in Medicine written by Francesco Puoci and published by Springer. This book was released on 2014-12-02 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an up-to-date overview of the diverse medical applications of advanced polymers. The book opens by presenting important background information on polymer chemistry and physicochemical characterization of polymers. This serves as essential scientific support for the subsequent chapters, each of which is devoted to the applications of polymers in a particular medical specialty. The coverage is broad, encompassing orthopedics, ophthalmology, tissue engineering, surgery, dentistry, oncology, drug delivery, nephrology, wound dressing and healing, and cardiology. The development of polymers that enhance the biocompatibility of blood-contacting medical devices and the incorporation of polymers within biosensors are also addressed. This book is an excellent guide to the recent advances in polymeric biomaterials and bridges the gap between the research literature and standard textbooks on the applications of polymers in medicine.
Download or read book Industrial Polymers written by E. Alfredo Campo and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2015-05-07 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Polymers provides a comprehensive and very practical overview of the various plastic materials used in today's industrial applications. Its focus is on material properties and areas of application. All industrially significant plastic families and grades are introduced following the same approach: their chemical constitution, manufacturing, properties, processing, and end use applications. The consistent presentation allows easy comparison of different materials for the reader and will help with the initial identification of suitable plastic materials for a given end-use. Ample full-color illustrations are testimony to the fact that plastic materials are the ultimate tribute to man's creativity and inventiveness. Content: Polymeric Materials Thermoplastic Polymers Thermoplastic Elastomers (TPE) Liquid Injection Molding Silicone (LIM®) Thermoset Polymers
