Download or read book An Introduction to SolidWorks Flow Simulation 2010 written by John E. Matsson and published by SDC Publications. This book was released on 2010-09-06 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SolidWorks Flow Simulation 2010 takes the reader through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The twelve chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Download or read book An Introduction to SOLIDWORKS Flow Simulation 2023 written by John Matsson and published by SDC Publications. This book was released on 2023-07-14 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: • Step-by-step tutorials cover the creation of parts, setup and calculations with SOLIDWORKS Flow Simulation • Covers fluid mechanics, fluid flow and heat transfer simulations • Results are compared to analytical solutions and empirical data • This edition features a new chapter covering Supersonic Flow Over a Cone An Introduction to SOLIDWORKS Flow Simulation 2023 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The eighteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, compressible flow, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow. Covers these features of SOLIDWORKS Flow Simulation 2023: • Animations • Automatic and Manual Meshing • Boundary Conditions • Calculation Control Options • External and Internal Flow • Free Surfaces • Goals • Free Surfaces • Laminar and Turbulent Flow • Physical Features • Result Visualizations • Two and Three Dimensional Flow • Velocity, Thermodynamic and Turbulence Parameters • Wall Thermal Conditions

Download or read book An Introduction to SOLIDWORKS Flow Simulation 2018 written by John Matsson and published by SDC Publications. This book was released on 2018 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SOLIDWORKS Flow Simulation 2018 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Download or read book An Introduction to SOLIDWORKS Flow Simulation 2021 written by John Matsson and published by SDC Publications. This book was released on 2021-04 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SOLIDWORKS Flow Simulation 2021 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow. Covers these feature of SOLIDWORKS Flow Simulation 2021: Animations Automatic and Manual Meshing Boundary Conditions Calculation Control Options External and Internal Flow Goals Laminar and Turbulent Flow Physical Features Result Visualizations Two and Three Dimensional Flow Velocity, Thermodynamic and Turbulence Parameters Wall Thermal Conditions Free Surfaces

Download or read book An Introduction to SOLIDWORKS Flow Simulation 2016 written by John Matsson and published by SDC Publications. This book was released on 2016-07 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SOLIDWORKS Flow Simulation 2016 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Download or read book An Introduction to SolidWorks Flow Simulation 2012 written by John E. Matsson and published by SDC Publications. This book was released on 2012 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SolidWorks Flow Simulation 2012 takes you through the steps of creating the SolidWorks part for the simulation followed by the setup and calculation of the SolidWorks Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The thirteen chapters of this book are directed towards first-time to intermediate level users of SolidWorks Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Download or read book An Introduction to SOLIDWORKS Flow Simulation 2019 written by John Matsson and published by SDC Publications. This book was released on 2019-09-18 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to SOLIDWORKS Flow Simulation 2019 takes you through the steps of creating the SOLIDWORKS part for the simulation followed by the setup and calculation of the SOLIDWORKS Flow Simulation project. The results from calculations are visualized and compared with theoretical solutions and empirical data. Each chapter starts with the objectives and a description of the specific problems that are studied. End of chapter exercises are included for reinforcement and practice of what has been learned. The fourteen chapters of this book are directed towards first-time to intermediate level users of SOLIDWORKS Flow Simulation. It is intended to be a supplement to undergraduate Fluid Mechanics and Heat Transfer related courses. This book can also be used to show students the capabilities of fluid flow and heat transfer simulations in freshman and sophomore courses such as Introduction to Engineering. Both internal and external flow problems are covered and compared with experimental results and analytical solutions. Covered topics include airfoil flow, boundary layers, flow meters, heat exchanger, natural and forced convection, pipe flow, rotating flow, tube bank flow and valve flow.

Download or read book Introduction to Finite Element Analysis Using SolidWorks Simulation 2011 written by Randy Shih and published by SDC Publications. This book was released on 2011-01-20 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Introduction to Finite Element Analysis Using SolidWorks Simulation 2011 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of Finite Element Analysis are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SolidWorks Simulation in performing Linear Static Stress Analysis and basic Model Analysis. This text covers SolidWorks Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important Finite Element Analysis techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning FEA users to SolidWorks Simulation. The basic premise of this book is that the more designs you create using SolidWorks Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Download or read book Analysis of Machine Elements Using SOLIDWORKS Simulation 2022 written by Shahin S. Nudehi and published by SDC Publications. This book was released on with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Machine Elements Using SOLIDWORKS Simulation 2022 is written primarily for first-time SOLIDWORKS Simulation 2022 users who wish to understand finite element analysis capabilities applicable to stress analysis of mechanical elements. The focus of examples is on problems commonly found in introductory, undergraduate, Design of Machine Elements or similarly named courses. In order to be compatible with most machine design textbooks, this text begins with problems that can be solved with a basic understanding of mechanics of materials. Problem types quickly migrate to include states of stress found in more specialized situations common to a design of mechanical elements course. Paralleling this progression of problem types, each chapter introduces new software concepts and capabilities. Many examples are accompanied by problem solutions based on use of classical equations for stress determination. Unlike many step-by-step user guides that only list a succession of steps, which if followed correctly lead to successful solution of a problem, this text attempts to provide insight into why each step is performed. This approach amplifies two fundamental tenets of this text. The first is that a better understanding of course topics related to stress determination is realized when classical methods and finite element solutions are considered together. The second tenet is that finite element solutions should always be verified by checking, whether by classical stress equations or experimentation. Each chapter begins with a list of learning objectives related to specific capabilities of the SOLIDWORKS Simulation program introduced in that chapter. Most software capabilities are repeated in subsequent examples so that users gain familiarity with their purpose and are capable of using them in future problems. All end-of-chapter problems are accompanied by evaluation "check sheets" to facilitate grading assignments.

Download or read book Engineering Analysis with SOLIDWORKS Simulation 2022 written by Paul Kurowski and published by SDC Publications. This book was released on with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2022 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2022 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered • Linear static analysis of parts and assemblies • Contact stress analysis • Frequency (modal) analysis • Buckling analysis • Thermal analysis • Drop test analysis • Nonlinear analysis • Dynamic analysis • Random vibration analysis • h and p adaptive solution methods • Modeling techniques • Implementation of FEA in the design process • Management of FEA projects • FEA terminology

Download or read book Finite Element Analysis Concepts written by J. E. Akin and published by World Scientific. This book was released on 2010 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Young engineers are often required to utilize commercial finite element software without having had a course on finite element theory. That can lead to computer-aided design errors. This book outlines the basic theory, with a minimum of mathematics, and how its phases are structured within a typical software. The importance of estimating a solution, or verifying the results, by other means is emphasized and illustrated. The book also demonstrates the common processes for utilizing the typical graphical icon interfaces in commercial codes. in particular, the book uses and covers the widely utilized SolidWorks solid modeling and simulation system to demonstrate applications in heat transfer, stress analysis, vibrations, buckling, and other fields. The book, with its detailed applications, will appeal to upper-level undergraduates as well as engineers new to industry.

Download or read book Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2020 written by Randy Shih and published by SDC Publications. This book was released on 2020-02 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2020 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SOLIDWORKS Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SOLIDWORKS Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning FEA users to SOLIDWORKS Simulation. The basic premise of this book is that the more designs you create using SOLIDWORKS Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Download or read book Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2021 written by Randy Shih and published by SDC Publications. This book was released on with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2021 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SOLIDWORKS Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SOLIDWORKS Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning FEA users to SOLIDWORKS Simulation. The basic premise of this book is that the more designs you create using SOLIDWORKS Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Download or read book Learning SciPy for Numerical and Scientific Computing Second Edition written by Sergio J. Rojas G. and published by Packt Publishing Ltd. This book was released on 2015-02-26 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book targets programmers and scientists who have basic Python knowledge and who are keen to perform scientific and numerical computations with SciPy.

Download or read book Oracle Advanced PL SQL Developer Professional Guide written by Saurabh K. Gupta and published by Packt Publishing Ltd. This book was released on 2012-01-01 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is packed with real world examples that cover all the advanced features of PL/SQL. In turn, each major certification topic is covered in a separate chapter that makes understanding concepts easier. At the end of each chapter, you will find plenty of practice questions to strengthen and test your learning.If you are a PL/SQL developer looking for deeper insight and a move from mid-level programmer to professional database developer, then this is the best guide for you. This book is also an ideal guide for all the Associate level PL/SQL programmers who are preparing for the Professional 1Z0-146 certification. This book assumes you have prior knowledge of PL/SQL programming.

Download or read book Motion Simulation and Mechanism Design with SolidWorks Motion 2016 written by Kuang-Hua Chang and published by . This book was released on 2016-06 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developing Microservices with Node Js written by David Gonzalez and published by Packt Publishing. This book was released on 2016-04-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to develop efficient and scalable microservices for server-side programming in Node.js using this hands-on guideAbout This Book- Real world example explained chapter after chapter with code examples.- Useful concepts for other languages like Java or PHP- Easy to follow by people with little to none experience in Node.js- Node.js Version 0.12.2 and the latest compatible versions of Seneca and PM2Who This Book Is ForNode.js developer with basic server-side development knowledge - but no knowledge of implementing microservices in Node.js applications. Also useful for developers in other languages like Java or C#.What You Will Learn- Identify where the microservice oriented architectures can tackle the most common problems in the software used by the big organisations.- Re-architecture an existing monolithic system into a microservices oriented software.- Build robust and scalable microservices using Seneca and Node.js.- Testing of the microservices in insolation in order to create a solid system.- Deploy and manage microservices using PM2- Monitoring the health of a microservice (CPU, memory, I/O...) and how the degradation of the performance in one microservice could degrade the performance of full system.In DetailMicroservices architecture is a style of software architecture. As the name suggests, microservicess refers to small services. For a large implementation, this means breaking the system into really small, independent services. Alternative to monolithic architecture (where the entire system is considered as a single big, interwoven segment), microservices approach is getting more and more popular with large, complex applications that have a very long lifecycle, which require changes at regular intervals. Microservices approach allows this type of changes with ease as only a part of the system undergoes changes and change control is easy.An example of such large system can be an online store-includes user interface, managing product catalog, processing orders, managing customer's account. In a microservices architecture each of these tasks will be divided and into smaller services. Also, these services will be further broken down into independent services-for user interface, there will be separate services for input, output, search bar management, and so on. Similarly, all other tasks can be divided in very small and simple services.Style and approachThis book is a comprehensive guide to developing production-ready implementation of the microservices architecture with Node.js. Each chapter builds up on the earlier one creating a strong foundation on which you create your own microservice in a distributed environment.