Download or read book An Introduction to Seismic Design of Nonstructural Building Components for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-03-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers interested in seismic design of non-structural components of buildings. Here is what is discussed: 1. GENERAL, 2. ARCHITECTURAL COMPONENTS, 3. MECHANICAL AND ELECTRICAL EQUIPMENT, 4. ACCEPTANCE CRITERIA.
Download or read book An Introduction to Seismic Design of Nonstructural Building Components written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-02-06 with total page 47 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers interested in seismic design of nonstructural building components. Here is what is discussed: 1. GENERAL 2. ARCHITECTURAL COMPONENTS 3. MECHANICAL AND ELECTRICAL EQUIPMENT 4. ACCEPTANCE CRITERIA.
Download or read book Seismic Loads written by Finley Allan Charney and published by . This book was released on 2020 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authors Charney, Heausler, and Marshall provide clear, authoritative explanations of the seismic design provisions contained in Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Standard ASCE/SEI 7-16.
Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.
Download or read book Performance Based Seismic Design for Tall Buildings written by Ramin Golesorkhi and published by . This book was released on 2017-10-30 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance-Based Seismic Design (PBSD) is a structural design methodology that has become more common in urban centers around the world, particularly for the design of high-rise buildings. The primary benefit of PBSD is that it substantiates exceptions to prescribed code requirements, such as height limits applied to specific structural systems, and allows project teams to demonstrate higher performance levels for structures during a seismic event.However, the methodology also involves significantly more effort in the analysis and design stages, with verification of building performance required at multiple seismic demand levels using Nonlinear Response History Analysis (NRHA). The design process also requires substantial knowledge of overall building performance and analytical modeling, in order to proportion and detail structural systems to meet specific performance objectives.This CTBUH Technical Guide provides structural engineers, developers, and contractors with a general understanding of the PBSD process by presenting case studies that demonstrate the issues commonly encountered when using the methodology, along with their corresponding solutions. The guide also provides references to the latest industry guidelines, as applied in the western United States, with the goal of disseminating these methods to an international audience for the advancement and expansion of PBSD principles worldwide.
Download or read book An Introduction to Application of Criteria for Seismic Design for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-12-07 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers and other professional engineers interested in structural design to resist seismic forces. Here is what is discussed: 1. GENERAL, 2. SEISMIC USE GROUPS, 3. SEISMIC DESIGN CATEGORIES, 4. REDUNDANCY, 5. OVERSTRENGTH, 6. COMBINATION OF LOAD EFFECTS, 7. PERFORMANCE LEVELS, 8. DESIGN GROUND MOTIONS, 9. PERFORMANCE OBJECTIVES, 10. MINIMUM REQUIREMENTS FOR ANALYTICAL PROCEDURES, 11. GENERAL DESIGN PROCEDURES, 12. PERFORMANCE OBJECTIVES FOR NONSTRUCTURAL SYSTEMS AND COMPONENTS.
Download or read book Seismic Retrofit of Existing Buildings written by Matthew Fox and published by Emerald Group Publishing. This book was released on 2024-09-19 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Retrofit of Existing Buildings is a concise and easy-to-use guideline for practising engineers to assess and design successful seismic retrofit interventions for existing vulnerable buildings. It offers readers guidance on both conceptual design strategies and relevant detailed design considerations.
Download or read book Seismic Considerations for Communities at Risk written by Christopher Arnold and published by DIANE Publishing. This book was released on 1998-03 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: This community handbook will increase awareness of seismic risk & includes up-to-date information on seismic design & construction practices. It is designed to provide interested individuals across the nation with information that will assist them in assessing the seismic risk to their buildings & their community & in determining what might be done to mitigate that risk -- whether on an individual basis or through community building regulatory action. Contents: when happens to structures when the ground moves? decisions, decisions! how can I make my community act? codes & standards. etc. Illustrated.
Download or read book Displacement based Seismic Design of Structures written by M. J. N. Priestley and published by Iuss Press. This book was released on 2007 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: Displacement-Based Seismic Design of Structures is a book primarily directed towards practicing structural designers who are interested in applying performance-based concepts to seismic design. Since much of the material presented in the book has not been published elsewhere, it will also be of considerable interest to researchers, and to graduate and upper-level undergraduate students of earthquake engineering who wish to develop a deeper understanding of how design can be used to control seismic response. The design philosophy is based on determination of the optimum structural strength to achieve a given performance limit state, related to a defined level of damage, under a specified level of seismic intensity. Emphasis is also placed on how this strength is distributed through the structure. This takes two forms: methods of structural analysis and capacity design. It is shown that equilibrium considerations frequently lead to a more advantageous distribution of strength than that resulting from stiffness considerations. Capacity design considerations have been re-examined, and new and more realistic design approaches are presented to insure against undesirable modes of inelastic deformation. The book considers a wide range of structural types, including separate chapters on frame buildings, wall buildings, dual wall/frame buildings, masonry buildings, timber structures, bridges, structures with isolation or added damping devices, and wharves. These are preceded by introductory chapters discussing conceptual problems with current force-based design, seismic input for displacement-based design, fundamentals of direct displacement-based design, and analytical tools appropriate for displacement-based design. The final two chapters adapt the principles of displacement-based seismic design to assessment of existing structures, and present the previously developed design information in the form of a draft building code. The text is illustrated by copious worked design examples (39 in all), and analysis aids are provided in the form of a CD containing three computer programs covering moment-curvature analysis (Cumbia), linear-element-based inelastic time-history analysis (Ruaumoko), and a general fibre-element dynamic analysis program (SeismoStruct). The design procedure developed in this book is based on a secant-stiffness (rather than initial stiffness) representation of structural response, using a level of damping equivalent to the combined effects of elastic and hysteretic damping. The approach has been fully verified by extensive inelastic time history analyses, which are extensively reported in the text. The design method is extremely simple to apply, and very successful in providing dependable and predictable seismic response. Authors Bios M.J.N.Priestley Nigel Priestley is Professor Emeritus of the University of California San Diego, and co-Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS), Pavia, Italy. He has published more than 450 papers, mainly on earthquake engineering, and received numerous awards for his research. He holds honorary doctorates from ETH, Zurich, and Cujo, Argentina. He is co-author of two previous seismic design books “Seismic Design of Concrete and Masonry Buildings” and “Seismic Design and Retrofit of Bridges”, that are considered standard texts on the subjects. G.M.Calvi Michele Calvi is Professor of the University of Pavia and Director of the Centre of Research and Graduate Studies in Earthquake Engineering and Engineering Seismology (ROSE School), Istituto Universitario di Studi Superiori (IUSS) of Pavia. He has published more than 200 papers and is co-author of the book “Seismic Design and Retrofit of Bridges”, that is considered a standard text on the subject, has been involved in important construction projects worldwide, such as the Rion Bridge in Greece and the upgrading of the Bolu Viaduct in Turkey, and is coordinating several international research projects. M.J.Kowalsky Mervyn Kowalsky is Associate Professor of Structural Engineering in the Department of Civil, Construction, and Environmental Engineering at North Carolina State University and a member of the faculty of the ROSE School. His research, which has largely focused on the seismic behaviour of structures, has been supported by the National Science Foundation, the North Carolina and Alaska Departments of Transportation, and several industrial organizations. He is a registered Professional Engineer in North Carolina and an active member of several national and international committees on Performance-Based Seismic Design.
Download or read book An Introduction to Magnetic Resonance Imaging Suites for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in design and construction of magnetic resonance imaging (MRI) suites for hospitals and medical clinics. Here is hat is discussed: 1. DEFINITIONS, 2. FUNCTIONAL CONSIDERATIONS, 3. TECHNICAL CONSIDERATIONS, 4. FUNCTIONAL DIAGRAMS, 5. GUIDE PLATES.
Download or read book Proceedings of Seminar on Seismic Design Performance and Retrofit of Nonstructural Components in Critical Facilities written by and published by . This book was released on 2003 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.
Download or read book Fundamental Concepts of Earthquake Engineering written by Roberto Villaverde and published by CRC Press. This book was released on 2009-01-16 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt: While successfully preventing earthquakes may still be beyond the capacity of modern engineering, the ability to mitigate damages with strong structural designs and other mitigation measures are well within the purview of science. Fundamental Concepts of Earthquake Engineering presents the concepts, procedures, and code provisions that are currentl
Download or read book Minimum Design Loads for Buildings and Other Structures written by American Society of Civil Engineers and published by Amer Society of Civil Engineers. This book was released on 2000 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing for Earthquakes written by Federal Emergency Management Agency and published by www.Militarybookshop.CompanyUK. This book was released on 2006-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This full color manual is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know.
Download or read book Basic Earthquake Engineering written by Halûk Sucuoğlu and published by Springer. This book was released on 2014-05-09 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides senior undergraduate students, master students and structural engineers who do not have a background in the field with core knowledge of structural earthquake engineering that will be invaluable in their professional lives. The basics of seismotectonics, including the causes, magnitude, and intensity of earthquakes, are first explained. Then the book introduces basic elements of seismic hazard analysis and presents the concept of a seismic hazard map for use in seismic design. Subsequent chapters cover key aspects of the response analysis of simple systems and building structures to earthquake ground motions, design spectrum, the adoption of seismic analysis procedures in seismic design codes, seismic design principles and seismic design of reinforced concrete structures. Helpful worked examples on seismic analysis of linear, nonlinear and base isolated buildings, earthquake-resistant design of frame and frame-shear wall systems are included, most of which can be solved using a hand calculator.
Download or read book Tall Building Design written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-10-04 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the Question Frequently Proposed to the Designer by Architects: "Can We Do This? Offering guidance on how to use code-based procedures while at the same time providing an understanding of why provisions are necessary, Tall Building Design: Steel, Concrete, and Composite Systems methodically explores the structural behavior of steel, concrete, and composite members and systems. This text establishes the notion that design is a creative process, and not just an execution of framing proposals. It cultivates imaginative approaches by presenting examples specifically related to essential building codes and standards. Tying together precision and accuracy—it also bridges the gap between two design approaches—one based on initiative skill and the other based on computer skill. The book explains loads and load combinations typically used in building design, explores methods for determining design wind loads using the provisions of ASCE 7-10, and examines wind tunnel procedures. It defines conceptual seismic design, as the avoidance or minimization of problems created by the effects of seismic excitation. It introduces the concept of performance-based design (PBD). It also addresses serviceability considerations, prediction of tall building motions, damping devices, seismic isolation, blast-resistant design, and progressive collapse. The final chapters explain gravity and lateral systems for steel, concrete, and composite buildings. The Book Also Considers: Preliminary analysis and design techniques The structural rehabilitation of seismically vulnerable steel and concrete buildings Design differences between code-sponsored approaches The concept of ductility trade-off for strength Tall Building Design: Steel, Concrete, and Composite Systems is a structural design guide and reference for practicing engineers and educators, as well as recent graduates entering the structural engineering profession. This text examines all major concrete, steel, and composite building systems, and uses the most up-to-date building codes.
