Download or read book An Introduction to Scanning Acoustic Microscopy written by Andrew Briggs and published by Oxford University Press, USA. This book was released on 1985 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date handbook provides a lucid introduction to acoustic microscopes with submicron resolution. The first half of the handbook shows how to operate the instrument, offering a description of a typical acoustic microscope, some detailed guidance for use, and a helpful discussion of the elements of contrast theory. The second half examines samples of the images that can be obtained, including micrographs of composites, grain structure, layered devices, and fine microcracks. The author has designed the book to help both those who have recently purchased an acoustic microscope and those who merely wish to find out if an acoustic microscope can help their research, whether it be in materials science, metallurgy, surface physics, or surface chemistry.
Download or read book An introduction to scanning acoustic microscopy written by and published by . This book was released on 1985 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Acoustic Microscopy written by Roman Gr. Maev and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This only and up-to-date monograph on this versatile method covers its use in a range of applications spanning the fields of physics, materials science, electrical engineering, medicine, and research and industry. Following an introduction, the highly experienced author goes on to investigate acoustic field structure, output signal formation in transmission raster acoustic microscopes and non-linear acoustic effects. Further chapters deal with the visco-elastic properties and microstructure of the model systems and composites used, as well as polymer composite materials and the microstructure and physical-mechanical properties of biological tissues. A handy reference for materials scientists, electrical engineers, radiologists, laboratory medics, test engineers, physicists, and graduate students.
Download or read book Acoustic Microscopy written by Andrew Briggs and published by Oxford University Press. This book was released on 2010 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years Acoustic Microscopy has been the definitive book on the subject. A key development since it was first published has been the development of ultrasonic force microscopy. The 2nd edition has a major new chapter on this technique and its applications.
Download or read book Acoustic Scanning Probe Microscopy written by Francesco Marinello and published by Springer Science & Business Media. This book was released on 2012-10-04 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combination of atomic force microscopy with ultrasonic methods allows the nearfield detection of acoustic signals. The nondestructive characterization and nanoscale quantitative mapping of surface adhesion and stiffness or friction is possible. The aim of this book is to provide a comprehensive review of different scanning probe acoustic techniques, including AFAM, UAFM, SNFUH, UFM, SMM and torsional tapping modes. Basic theoretical explanations are given to understand not only the probe dynamics but also the dynamics of tip surface contacts. Calibration and enhancement are discussed to better define the performance of the techniques, which are also compared with other classical techniques such as nanoindentation or surface acoustic wave. Different application fields are described, including biological surfaces, polymers and thin films.
Download or read book Advances in Acoustic Microscopy written by Andrew Briggs and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of Advances in Acoustic Microscopy. It continues the aim of presenting applications and developments of techniques that are related to high-resolution acoustic imaging. We are very grateful to the authors who have devoted considerable time to preparing these chapters, each of which describes a field of growing importance. Laboratories that have high-performance acoustic microscopes are frequently asked to examine samples for which the highest available resolution is not necessary, and the ability to penetrate opaque layers is more significant. Such applications can be thought of as bridging the gap be tween acoustic microscopy at low gigahertz frequencies, and on the one hand nondestructive testing of materials at low megahertz frequencies and on the other hand medical ultrasonic imaging at low megahertz frequencies. Commercial acoustic microscopes are becoming increasingly available and popular for such applications. We are therefore delighted to be able to begin the volume with chapters from each of those two fields. The first chapter, by Gabriele Pfannschmidt, describes uses of acoustic microscopy in the semiconductor industry. It provides a splendid balance to the opening chapter of Volume 1, which came from a national research center, being written from within a major European electronics industry itself. Dr Pfann schmidt describes the use of two quite different types of acoustic microscopes, and points out the advantages of each for specific purposes.
Download or read book Introduction to Microscopy by Means of Light Electrons X Rays or Acoustics written by Theodore G. Rochow and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following three printings of the First Edition (1978), the publisher has asked for a Second Edition to bring the contents up to date. In doing so the authors aim to show how the newer microscopies are related to the older types with respect to theoretical resolving power (what you pay for) and resolution (what you get). The book is an introduction to students, technicians, technologists, and scientists in biology, medicine, science, and engineering. It should be useful in academic and industrial research, consulting, and forensics; how ever, the book is not intended to be encyclopedic. The authors are greatly indebted to the College of Textiles of North Carolina State University at Raleigh for support from the administration there for typing, word processing, stationery, mailing, drafting diagrams, and general assistance. We personally thank Joann Fish for word process ing, Teresa M. Langley and Grace Parnell for typing services, Mark Bowen for drawing graphs and diagrams, Chuck Gardner for photographic ser vices, Deepak Bhattavahalli for his work with the proofs, and all the other people who have given us their assistance. The authors wish to acknowledge the many valuable suggestions given by Eugene G. Rochow and the significant editorial contributions made by Elizabeth Cook Rochow.
Download or read book An Introduction to Scanning Acoustic Microscopy written by Andrew Briggs and published by Oxford University Press, USA. This book was released on 1985 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: This up-to-date handbook provides a lucid introduction to acoustic microscopes with submicron resolution. The first half of the handbook shows how to operate the instrument, offering a description of a typical acoustic microscope, some detailed guidance for use, and a helpful discussion of the elements of contrast theory. The second half examines samples of the images that can be obtained, including micrographs of composites, grain structure, layered devices, and fine microcracks. The author has designed the book to help both those who have recently purchased an acoustic microscope and those who merely wish to find out if an acoustic microscope can help their research, whether it be in materials science, metallurgy, surface physics, or surface chemistry.
Download or read book Microelectronics Fialure Analysis Desk Reference Seventh Edition written by Tejinder Gandhi and published by ASM International. This book was released on 2019-11-01 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electronic Device Failure Analysis Society proudly announces the Seventh Edition of the Microelectronics Failure Analysis Desk Reference, published by ASM International. The new edition will help engineers improve their ability to verify, isolate, uncover, and identify the root cause of failures. Prepared by a team of experts, this updated reference offers the latest information on advanced failure analysis tools and techniques, illustrated with numerous real-life examples. This book is geared to practicing engineers and for studies in the major area of power plant engineering. For non-metallurgists, a chapter has been devoted to the basics of material science, metallurgy of steels, heat treatment, and structure-property correlation. A chapter on materials for boiler tubes covers composition and application of different grades of steels and high temperature alloys currently in use as boiler tubes and future materials to be used in supercritical, ultra-supercritical and advanced ultra-supercritical thermal power plants. A comprehensive discussion on different mechanisms of boiler tube failure is the heart of the book. Additional chapters detailing the role of advanced material characterization techniques in failure investigation and the role of water chemistry in tube failures are key contributions to the book.
Download or read book Acoustical Imaging written by Hiroshi Shimizu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 17th International Symposium on Acoustical Imaging was held at Tohoku University, Sendai, Japan, during May 31-June 2, 1988. The symposium was organized by the ultrasonics research group of Tohoku University and the IEEE ijFFC Society, Tokyo Chapter. Of the 128 papers submitted, 88 were presented during the symposium, which comprised 144 researchers from 13 countries. This volume contains 81 papers as the record of the symposium and is clas sified into the following sections: (1) Acoustic Microscopy and its Applications; (2) Non-Destructive Evaluation; (3) Signal Processing of Images; (4) Acoustic Measurements and Physical Acoustics; (5) Medical Ultrasonic Diagnostics; (6) Acoustic Sensors; (7) Acoustic Holography and Tomography; (8) Seismic Exploration; and (9) Imaging Instrumentation and Other Techniques. A number of the papers submitted were associated with medical ultrasonic diagnostics and acoustic microscopy, reflecting a major activity in acousti cal imaging at Tohoku University. Accordingly, two invited talks were focused on this area: acoustic microscopy by Dr. G. A. D. Briggs of the University of Oxford and medical ultrasonics by Prof. M. Tanaka of Tohoku University. In light of the history of research in this field at our university, we are delighted to have had the opportunity to host the 17th symposium.
Download or read book Advances in Acoustic Microscopy and High Resolution Imaging written by Roman Gr. Maev and published by John Wiley & Sons. This book was released on 2013-02-04 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel physical solutions, including new results in the field of adaptive methods and inventive approaches to inverse problems, original concepts based on high harmonic imaging algorithms, intriguing vibro-acoustic imaging and vibro-modulation technique, etc. were successfully introduced and verified in numerous studies of industrial materials and biomaterials in the last few years. Together with the above mentioned traditional academic and practical avenues in ultrasonic imaging research, intriguing scientific discussions have recently surfaced and will hopefully continue to bear fruits in the future. The goal of this book is to provide an overview of the recent advances in high-resolution ultrasonic imaging techniques and their applications to biomaterials evaluation and industrial materials. The result is a unique collection of papers presenting novel results and techniques that were developed by leading research groups worldwide. This book offers a number of new results from well-known authors who are engaged in aspects of the development of novel physical principles, new methods, or implementation of modern technological solutions into current imaging devices and new applications of high-resolution imaging systems. The ultimate purpose of this book is to encourage more research and development in the field to realize the great potential of high resolution acoustic imaging and its various industrial and biomedical applications.
Download or read book Advances in Acoustic Microscopy written by Andrew Briggs and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1992 Acoustic Microscopy was published by Oxford University Press, in the series of Monographs on the Physics and Chemistry of Materials. Reviews appeared in the Journal of Microscopy [169 (1), 91] and in Contemporary Physics [33 (4), 296]. At the time of going to press, it seemed that the field of acoustic microscopy had settled down from the wonderful developments in resolution that had been seen in the late seventies and the early eighties and from the no less exciting developments in quantitative elastic measurements that had followed. One reviewer wrote, "The time is ripe for such a book, now that the expansion of the subject has perceptively slowed after it was detonated by Lemons and Quate. " [A. Howie, Proc. RMS 27 (4), 280]. In many ways, this remains true. The basic design for both imaging and quantitative instruments is well-established; the upper frequency for routine imaging is the 2 GHz established by the Ernst Leitz scanning acoustic microscope (ELSAM) in 1984. For the most accurate V(z) measurements, the 225-MHz line-focus-beam lens, developed at Tohoku Univer sity a little before then, remains standard. The principles of the contrast theory have been confirmed by abundant experience; in particular the role of surface acoustic waves, such as Rayleigh waves, dominates the contrast in most high resolution studies of many materials.
Download or read book Scanning Probe Microscopy written by Ernst Meyer and published by Springer Nature. This book was released on 2021-05-31 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by three leading experts in the field, this textbook describes and explains all aspects of the scanning probe microscopy. Emphasis is placed on the experimental design and procedures required to optimize the performance of the various methods. Scanning Probe Microscopy covers not only the physical principles behind scanning probe microscopy but also questions of instrumental designs, basic features of the different imaging modes, and recurring artifacts. The intention is to provide a general textbook for all types of classes that address scanning probe microscopy. Third year undergraduates and beyond should be able to use it for self-study or as textbook to accompany a course on probe microscopy. Furthermore, it will be valuable as reference book in any scanning probe microscopy laboratory. Novel applications and the latest important results are also presented, and the book closes with a look at the future prospects of scanning probe microscopy, also discussing related techniques in nanoscience. Ideally suited as an introduction for graduate students, the book will also serve as a valuable reference for practising researchers developing and using scanning probe techniques.
Download or read book Scanning Acoustic Microscope written by Calvin F. Quate and published by . This book was released on 1979 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Collected Papers on Acoustics written by Wallace Clement Sabine and published by Franklin Classics. This book was released on 2018-10-12 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important and is part of the knowledge base of civilization as we know it. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. To ensure a quality reading experience, this work has been proofread and republished using a format that seamlessly blends the original graphical elements with text in an easy-to-read typeface. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Microscopy and Analysis written by Stefan G. Stanciu and published by BoD – Books on Demand. This book was released on 2016-09-21 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microscopes represent tools of the utmost importance for a wide range of disciplines. Without them, it would have been impossible to stand where we stand today in terms of understanding the structure and functions of organelles and cells, tissue composition and metabolism, or the causes behind various pathologies and their progression. Our knowledge on basic and advanced materials is also intimately intertwined to the realm of microscopy, and progress in key fields of micro- and nanotechnologies critically depends on high-resolution imaging systems. This volume includes a series of chapters that address highly significant scientific subjects from diverse areas of microscopy and analysis. Authoritative voices in their fields present in this volume their work or review recent trends, concepts, and applications, in a manner that is accessible to a broad readership audience from both within and outside their specialist area.
Download or read book Selected Papers on Scanning Acoustic Microscopy written by Butrus T. Khuri-Yakub and published by . This book was released on 1992 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
