Download or read book An Introduction to Recycling Construction and Demolition Waste written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-02-02 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory guidance for professional engineers and construction managers interested in recycling costruction and demolition waste.

Download or read book An Introduction to Recycling Construction and Demolition Waste for Professional Engineers written by J Paul Guyer and published by Independently Published. This book was released on 2023-03-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in construction and demolition waste management. Here is what is discussed: 1. INTRODUCTION, 2. PROJECT OBJECTIVES, 3. PROJECT CONDITIONS.

Download or read book An Introduction to Recycling Construction and Demolition Waste written by J. Paul Guyer and published by CreateSpace. This book was released on 2014-02-26 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides an introduction to recycling construction and demolition waste from buildings and other infrastructure.

Download or read book An Introduction to Industrial Byproducts in Concrete Pavement for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2024-09-05 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for Professional Engineers interested in utilization of industrial byproducts in concrete street and highway pavements.

Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.

Download or read book Construction Demolition and Disaster Waste Management written by Erik K. Lauritzen and published by CRC Press. This book was released on 2018-09-03 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Construction and Demolition Waste (CDW), from the construction, maintenance, renovation and demolition of buildings and structures, represents a large proportion of the waste in industrialized societies. Compared to other forms, such as household waste, more than 90% of CDW can be used as a resource and a substitute for construction materials, especially for primary, natural raw materials. Reuse, recovery and recycling depends on the quality and market for the materials, and the environmental impact of the processes for conversion of CDW from old structures to its use in new structures. However, the utilization today of CDW products as secondary resources is marginal. Most CDW is deposited or used as fill material, and the opportunities of high quality recycling are generally neglected. This book presents the opportunities for the sustainable and resource efficient utilisation of CDW, focusing on recycling of concrete and masonry as the major forms of CDW. The recycling of gypsum, timber, mineral wool, asphalt and other types are also described. Its aim is to present a chain of value and material streams in the transformation of obsolete buildings and structures into new buildings and structures. It takes a holistic view, focusing on the lifecycle economy (the circular economy) and integrated management aspects of various scenarios ranging from high industrial urban renewal to debris removal and management after disasters and conflicts. It is based on the author ́s 35 years of research and development combined with practical international experience within the demolition and recycling area. It addresses students, architects, civil engineers, building owners, public authorities and others working in urban planning, demolition and resource management in the building and construction sector and in the reconstruction of damaged buildings after disasters and wars.

Download or read book An Introduction to Specifications for Sustainability for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2024-07-31 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for Professional Engineers interested in specifications for sustainable engineering.

Download or read book Advances in Construction and Demolition Waste Recycling written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Download or read book Solid Waste Recycling and Processing written by Marc J. Rogoff and published by Elsevier. This book was released on 2013-11-18 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid Waste Recycling and Processing, Second Edition, provides best-practice guidance to solid waste managers and recycling coordinators. The book covers all aspects of solid waste processing, volume reduction, and recycling, encompassing typical recyclable materials (paper, plastics, cans, and organics), construction and demolition debris, electronics, and more. It includes techniques, technologies, and programs to help maximize customer participation rates and revenues, as well as to minimize operating costs. The book is packed with lessons learned by the author during the implementation of the most successful programs worldwide, and includes numerous case studies showing how different systems work in different settings. This book also takes on industry debates such as the merits of curbside-sort versus single-stream recycling and the use of advanced technology in materials recovery facilities. It provides key facts and figures, and brief summaries of legislation in the United States, Europe, and Asia. An extensive glossary demystifies the terminology and acronyms used in different sectors and geographies. The author also explains emerging concepts in recycling such as zero waste, sustainability, LEED certification, and pay-as-you-throw, and places waste management and recycling in wider economic, environmental (sustainability), political, and societal contexts. - Covers single- and mixed-waste streams - Evaluates the technologies and tradeoffs of recycling of materials vs. integrated solutions, including combustion and other transformational options - Covers recycling as part of the bigger picture of solid waste management, processing and disposal

Download or read book An Introduction to Sustainable Design for Buildings for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-03-31 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and architects interested in sustainable design of buildings. Here is what is discussed: 1. THE SUSTAINABLE DESIGN CHALLENGE, 2. THE SIX PRINCIPLES OF SUSTAINABLE DESIGN, 3. PRINCIPLE: OPTIMIZATION OF SITE POTENTIAL, 4. PRINCIPLE: OPTIMIZING ENERGY USE, 5. PRINCIPLE: PROTECTION AND CONSERVATION OF WATER, 6. PRINCIPLE: SELECTION AND USE OF ENVIRONMENTALLY PREFERABLE PRODUCTS, 7. PRINCIPLE: ENHANCEMENT OF INDOOR ENVIRONMENTA QUALITY, 8. OPTIMIZATION OF OPERATIONS AND MAINTENANCE PRACTICES, 9. AN AFTERWORD: HOW TO USE THE INFORMATION IN THIS COURSE.

Download or read book Handbook of Recycled Concrete and Demolition Waste written by F. Pacheco-Torgal and published by Elsevier. This book was released on 2013-09-30 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The civil engineering sector accounts for a significant percentage of global material and energy consumption and is a major contributor of waste material. The ability to recycle and reuse concrete and demolition waste is critical to reducing environmental impacts in meeting national, regional and global environmental targets. Handbook of recycled concrete and demolition waste summarises key recent research in achieving these goals.Part one considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants and the economics of managing construction and demolition waste. Part two reviews key steps in handling construction and demolition waste. It begins with a comparison between conventional demolition and construction techniques before going on to discuss the preparation, refinement and quality control of concrete aggregates produced from waste. It concludes by assessing the mechanical properties, strength and durability of concrete made using recycled aggregates. Part three includes examples of the use of recycled aggregates in applications such as roads, pavements, high-performance concrete and alkali-activated or geopolymer cements. Finally, the book discusses environmental and safety issues such as the removal of gypsum, asbestos and alkali-silica reaction (ASR) concrete, as well as life-cycle analysis of concrete with recycled aggregates.Handbook of recycled concrete and demolition waste is a standard reference for all those involved in the civil engineering sector, as well as academic researchers in the field. - Summarises key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts and meet national, regional and global environmental targets - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste

Download or read book Sustainable Waste Management and Recycling written by Mukesh C. Limbachiya and published by Thomas Telford. This book was released on 2004 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three volumes from part of the Proceedings of the two-day International Conference organised by the Concrete and Masonry Research Group within the School of Engineering at Kingston University, held in September 2004. The Conference deals with issues such as the regulatory framework, government policy, waste management, processing, recovery, the supply network, recycling opportunities, sustainable ways forward and the economics of sustainability.

Download or read book Proceeding of the 3rd International Conference on Geotechnical Engineering for Disaster Mitigation and Rehabilitation 2011 Combined with the 5th International Conference on Geotechnical and Highway Engineering Practical Applications Challenges and Opportunities written by and published by World Scientific. This book was released on 2011 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains 89 papers from 25 countries and regions, including 14 keynote lectures and 17 invited lectures, presented at the Third International Conference on Geotechnical Engineering for Disaster Mitigation and Rehabilitation (3ICGEDMAR 2011) together with the Fifth International Conference on Geotechnical & Highway Engineering (5ICGHE), which was held in Semarang, Indonesia, from 18 to 20 May 2011. This is the third conference in the GEDMAR conference series. The first was held in Singapore from 12 to 13 December 2005 and the second in Nanjing, China, from 30 May to 2 June 2008. The proceedings is divided into three sections : keynote papers, invited papers and conference papers under which there are six sub-sections : Case Studies on Recent Disasters; Soil Behaviours and Mechanisms for Hazard Analysis; Disaster Mitigation and Rehabilitation Techniques; Risk Analysis and Geohazard Assessment; Innovation Foundations for Rail, Highway, and Embankments; and Slope Failures and Remedial Measures. The conference is held under the auspices of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE) Technical Committee TC-303 : Coastal and River Disaster Mitigation and Rehabilitation, TC-203 : Earthquake Geotechnical Engineering and Associated Problems, TC-302 : Forensic Geotechnical Engineering, TC-304 : Engineering Practice of Risk Assessment and Management, TC-213 : Geotechnics of Soil Erosion, TC-202 : Transportation Geotechnics, TC-211 : Ground Improvement, Southeast Asian Geotechnical Society (SEAGS), Association of Geotechnical Societies in Southeast Asia (AGSSEA), and Road Engineering Association of Asia & Australasia (REAAA).

Download or read book Circular Economy in the Construction Industry written by Sadhan Kumar Ghosh and published by CRC Press. This book was released on 2021-12-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.

Download or read book Handbook of Solid Waste Management written by George Tchobanoglous and published by McGraw Hill Professional. This book was released on 2002-07-13 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a world where waste incinerators are not an option and landfills are at over capacity, cities are hard pressed to find a solution to the problem of what to do with their solid waste. Handbook of Solid Waste Management, 2/e offers a solution. This handbook offers an integrated approach to the planning, design, and management of economical and environmentally responsible solid waste disposal system. Let twenty industry and government experts provide you with the tools to design a solid waste management system capable of disposing of waste in a cost-efficient and environmentally responsible manner. Focusing on the six primary functions of an integrated system--source reduction, toxicity reduction, recycling and reuse, composting, waste- to-energy combustion, and landfilling--they explore each technology and examine its problems, costs, and legal and social ramifications.

Download or read book McGraw Hill Recycling Handbook 2nd Edition written by Herbert F. Lund and published by McGraw Hill Professional. This book was released on 2001 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition covers the following topics - medical waste recycling, recycling old, closed landfills, recycling sports stadiums, malls, and amusement parks, flow control legal decisions and recycling product development.

Download or read book Sustainable Environment and Infrastructure written by Krishna R. Reddy and published by Springer Nature. This book was released on 2020-09-16 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains selects papers presented during the 2nd International Conference on Environmental Geotechnology, Recycled Waste Materials and Sustainable Engineering, held in the University of Illinois at Chicago. It covers the recent innovations, trends, and concerns, practical challenges encountered, and the solutions adopted in waste management and engineering, geotechnical and geoenvironmental engineering, infrastructure engineering, and sustainable engineering. This book will be useful for academics, educators, policy makers and professionals working in the field of civil engineering, chemical engineering, environmental sciences and public policy.