Download or read book Handbook of Polyethylene Pipe written by and published by Plastics Pipe Institute. This book was released on 2012-02 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published by the Plastics Pipe Institute (PPI), the Handbook describes how polyethylene piping systems continue to provide utilities with a cost-effective solution to rehabilitate the underground infrastructure. The book will assist in designing and installing PE piping systems that can protect utilities and other end users from corrosion, earthquake damage and water loss due to leaky and corroded pipes and joints.

Download or read book An Introduction to Water and Wastewater Engineering written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-20 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and environmental engineers and other professional engineers and construction managers interested in domestic water treatment and wastewater collection and treatment. Here is what is discussed: 1. ACTIVATED SLUDGE WASTEWATER TREATMENT PLANTS 2. ADVANCED WASTEWATER TREATMENT 3. AREA DRAINAGE SYSTEMS 4. DOMESTIC WASTEWATER TREATMENT 5. DOMESTIC WATER DISTRIBUTION 6. DOMESTIC WATER TREATMENT 7. HYDRAULIC DESIGN DATA FOR CULVERTS 8. HYDRAULIC DESIGN OF SEWERS 9. LOW IMPACT DEVELOPMENT 10. OILY WASTEWATER COLLECTION AND TREATMENT 11. DRAINAGE PIPE STRENGTH, COVER AND BEDDING 12. PRELIMINARY WASTEWATER TREATMENT 13. PRIMARY WASTEWATER TREATMENT 14. PUMPING STATIONS FOR WATER SUPPLY SYSTEMS 15. SLUDGE HANDLING, TREATMENT AND DISPOSAL 16. SMALL FLOW WASTE TREATMENT SYSTEMS 17. TREATED WATER STORAGE 18. WASTEWATER COLLECTION AND PUMPING.

Download or read book Concrete Pressure Pipe 3rd Ed written by American Water Works Association and published by American Water Works Association. This book was released on 2008 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive manual of water supply practices explains the design, selection, specification, installation, transportation, and pressure testing of concrete pressure pipes in potable water service.

Download or read book An Introduction to Wastewater Collection and Pumping written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-01-29 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and environmental engineers interested in wastewater collection and pumping. Here is what is discussed: 1. GENERAL 2. PRELIMINARY DESIGN CONSIDERATIONS 3. HYDRAULIC DESIGN OF SEWERS 4. SEWER SYSTEM LAYOUT AND APPURTENANCES 5. STRUCTURAL DESIGN OF SEWERS 6. PUMPING STATION AND EQUIPMENT 7. PUMPING SYSTEM DESIGN 8. PIPING 9. PUMPING STATION COMPONENTS 10. EVALUATION OF EXISTING SEWER SYSTEMS 11. REHABILITATION OF EXISTING SYSTEMS.

Download or read book An Introduction to Wastewater Collection and Pumping for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-02-10 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, environmental engineers, mechanical engineers and construction managers interested in wastewater collection and pumping. Here is what is discussed: 1. GENERAL, 2. PRELIMINARY DESIGN CONSIDERATIONS, 3. HYDRAULIC DESIGN OF SEWERS, 4. SEWER SYSTEM LAYOUT AND APPURTENANCES, 5. STRUCTURAL DESIGN OF SEWERS, 6. PUMPING STATION AND EQUIPMENT, 7. PUMPING SYSTEM DESIGN, 8. PIPING, 9. PUMPING STATION COMPONENTS, 10. EVALUATION OF EXISTING SEWER SYSTEMS, 11. REHABILITATION OF EXISTING SYSTEMS.

Download or read book Handbook of PVC Pipe Design and Construction written by Uni-Bell PVC Pipe Association and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Thorough and Far-reaching Revision Yet! The new 5th edition of the Handbook of PVC Pipe Design and Construction is the most comprehensive and up-to-date reference on PVC pipe and fittings. It provides practical engineering and construction information. It includes recommendations applicable to the design and use of primarily underground PVC piping systems in both pressure and non-pressure applications. Previous editions have been used by engineers all across North America and around the globe in the utility and consulting engineering sectors, as well as in universities and technical institutions. New to the Fifth Edition Four new chapters PVC Pressure Pipe Installation PVC Non-Pressure Pipe Installation Trenchless Installation of PVC Pipe Molecularly Oriented Polyvinyl Chloride Pipe (PVCO) Updated and improved graphs and tables More open page format The collaborative result of thousands of hours of research and review, the contents of the 5th edition are numerically formatted by section and subsection, as well as by figure and table designation. This allows easy reference and quick access. The Handbook of PVC Pipe Design and Construction is a must-have reference for design engineers, public and private pipe utility managers, and students. A more complete text on PVC pipe is not available.

Download or read book An Introduction to Levees written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-26 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and professional engineers and construction managers interested in design and construction of levees. Here is what is discussed: 1. FIELD INVESTIGATIONS 2. LEVEE CONSTRUCTION METHODS 3. SEEPAGE, SLOPE AND SETTLEMENT 4. BERMS, FILTERS AND DRAINS 5. SOIL CEMENT FOR PROTECTION OF LEVEE 6. SPECIAL FEATURES.

Download or read book An Introduction to Design of Hospitals and Medical Clinics for Professional Engineers and Architects written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-10-17 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects and construction managers interested in design of hospitals and medical clinics. Here is what is discussed: 1. ARCHITECTURAL DETAILS, 2. DRAINAGE SYSTEMS, 3. MEDICAL GAS AND VACUUM SYSTEMS, 4. HVAC SYSTEMS, 5. PLUMBING AND PIPING, 6. PLUMBING FIXTURES AND EQUIPMENT, 7. PLUMBING CRITERIA, 8. PUMBING SCHEMATICS AND SCHEDULES, 9. WATER SYSTEMS, 10. SITE PLANNING, 11. TRANSPORTATION, LOGISTICS, WAYFINDING, 12. WATER SUPPLY.

Download or read book An Introduction to Wastewater Collection for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-11-08 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in wastewater collection systems. Here is what is discussed: 1. GENERAL, 2. PRELIMINARY DESIGN CONSIDERATIONS, 3. HYDRAULIC DESIGN OF SEWERS, 4. SEWER SYSTEM LAYOUT AND APPURTENANCES, 5. STRUCTURAL DESIGN OF SEWERS, 6. PUMPING STATION AND EQUIPMENT, 7. PUMPING SYSTEM DESIGN,8. PIPING, 9. PUMPING STATION COMPONENTS, 10. EVALUATION OF EXISTING SEWER SYSTEMS, 11. REHABILITATION OF EXISTING SYSTEMS.

Download or read book Earth Manual written by and published by Reclamation Bureau. This book was released on 1990 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On cover: A guide to the use of soils as foundations and as construction materials for hydraulic structures. Provides a compilation of the soil testing procedures currently used by the Bureau of Reclamation.

Download or read book An Introduction to Utilities for Hospitals and Medical Clinics written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-11 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for mechanical, electrical and civil engineers interested in planning, design and construction of utilities for hospitals and medical clinics. Here is what is discussed: 1. OVERVIEW OF UTILITIES 2. GENERAL UTILITY DESIGN REQUIREMENTS 3. CONTRACT DOCUMENTS 4. CATHODIC PROTECTION 5. WATER SUPPLY 6. WATER STORAGE 7. DOMESTIC WATER PUMPING SYSTEM 8. IRRIGATION DISTRIBUTION SYSTEM 9. SANITARY SEWER SYSTEMS 10. STORM SEWER SYSTEMS 11. GAS DISTRIBUTION SYSTEM 12. OIL AND GASOLINE SUPPLY SYSTEM 13 FUEL STORAGE FACILITIES.

Download or read book Conduits Culverts and Pipes written by United States. Army. Corps of Engineers and published by . This book was released on 1969 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Levee Construction written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-01 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in construction of levees. Here is what is discussed: 1. LEVEE CONSTRUCTION METHODS 2. FOUNDATION PREPARATION AND TREATMENT 3. METHODS OF IMPROVING STABILITY 4. EMBANKMENT CONSTRUCTION CONTROL 5. EMBANKMENT ZONING 6. PROTECTION OF RIVERSIDE SLOPES 7. PIPELINES AND OTHER UTILITY LINES CROSSING LEVEES.

Download or read book Barry s Introduction to Construction of Buildings written by Stephen Emmitt and published by John Wiley & Sons. This book was released on 2018-09-10 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative, well-established, comprehensive, practical, and highly illustrated guide to construction practice Based mainly on domestic and residential buildings—and filled with extensive illustrations throughout—this concise text is the ideal introduction to the subject of building construction. It provides the basic material that readers need in order to understand the construction process for the majority of low rise buildings. The book explains construction technology through the key functional and performance requirements for the main elements common to all buildings. With a strong focus on building efficiency and meeting the challenges posed by limiting the environmental impact of buildings, and new “at a glance” summaries allowing you to grasp the salient points of each chapter, readers will find the text fully up to date with the latest building regulations and construction technology. Barry’s Introduction to Construction of Buildings, Fourth Edition starts by taking an in-depth look at the construction process and general principles of construction. It then offers comprehensive chapter coverage of site analysis, set-up, drainage and scaffolding; ground stability and foundations; floors, walls, doors, windows, roofs, stairs, and ramps; surface finishes; internal environment and energy supply; and water supply and sanitation. Deals with design, technology, site assembly, and environmental issues of domestic and residential buildings Thoroughly updated, with particular attention paid to the concept of building efficiency and improved integration of the topics covered to match current student needs New “at a glance” summaries at the beginning of each chapter A companion to Barry's Advanced Construction of Buildings, Fourth Edition Barry’s Introduction to Construction of Buildings is an excellent source of information for undergraduate students and those working towards similar NQF level 5 and 6 qualifications in building and construction.

Download or read book Geotechnical and Geoenvironmental Engineering Handbook written by R. Kerry Rowe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preface. Dedication. List of Figures. List of Tables. List of Contributors. Basic Behavior and Site Characterization. 1. Introduction; R.K. Rowe. 2. Basic Soil Mechanics; P.V. Lade. 3. Engineering Properties of Soils and Typical Correlations; P.V. Lade. 4. Site Characterization; D.E. Becker. 5. Unsaturated Soil Mechanics and Property Assessment; D.G. Fredlund, et al. 6. Basic Rocks Mechanics and Testing; K.Y. Lo, A.M. Hefny. 7. Geosynthetics: Characteristics and Testing; R.M. Koerner, Y.G. Hsuan. 8. Seepage, Drainage and Dewatering; R.W. Loughney. Foundations and Pavements. 9. Shallo.

Download or read book Pipeline Crossings written by Task Committee on Pipeline Crossings and published by ASCE Publications. This book was released on 1996-01-01 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pipeline Crossings (Manuals and Reports on Engineering Practice #89) was prepared by the Task Committee on Pipeline Crossings, Pipeline Crossings Technical Committee, Pipeline Division of the American Society of Civil Engineers. The purpose of this manual is to present common approaches for the design of crossing installations through the use of examples of standard practice as they exist in industry today. While the emphasis is on the pipeline crossing techniques of highways, railroads, and waterways, they can also be applied to cable and conduit crossings. The manual is divided into four major sections. First, general concepts are presented, including crossing environments, permits, and a description of the various types of crossings. The second section discusses the design issues while the different construction methods are explored in detail in the next section. Finally, the fourth section features a glossary of terms and a bibliography of resource materials. For new engineers, this manual may supplement what they were taught in school about pipeline design and construction. For more experienced engineers, it will hopefully provide useful options and guidelines from current practice.

Download or read book An Introduction to Airfield Engineering written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2020-11-09 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, mechanical and electrical engineers interested in planning and design of airports and airfields. Here is what is discussed: 1. AIRFIELD DRAINAGE, 2. AIRCRAFT HANGARS, 3. PASSENGER terminals, 4.RUNWAYS, 5. AIR TRAFFIC CONTROL FACILITIES. 6. CONTROL TOWER SITING.