Download or read book An Introduction to Kinetic Monte Carlo Simulations of Surface Reactions written by A.P.J. Jansen and published by Springer. This book was released on 2012-05-31 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kinetic Monte Carlo (kMC) simulations still represent a quite new area of research, with a rapidly growing number of publications. Broadly speaking, kMC can be applied to any system describable as a set of minima of a potential-energy surface, the evolution of which will then be regarded as hops from one minimum to a neighboring one. The hops in kMC are modeled as stochastic processes and the algorithms use random numbers to determine at which times the hops occur and to which neighboring minimum they go. Sometimes this approach is also called dynamic MC or Stochastic Simulation Algorithm, in particular when it is applied to solving macroscopic rate equations. This book has two objectives. First, it is a primer on the kMC method (predominantly using the lattice-gas model) and thus much of the book will also be useful for applications other than to surface reactions. Second, it is intended to teach the reader what can be learned from kMC simulations of surface reaction kinetics. With these goals in mind, the present text is conceived as a self-contained introduction for students and non-specialist researchers alike who are interested in entering the field and learning about the topic from scratch.

Download or read book Modeling and Simulation of Heterogeneous Catalytic Reactions written by Olaf Deutschmann and published by John Wiley & Sons. This book was released on 2013-09-18 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Nobel Prize in Chemistry 2007 awarded to Gerhard Ertl for his groundbreaking studies in surface chemistry highlighted the importance of heterogeneous catalysis not only for modern chemical industry but also for environmental protection. Heterogeneous catalysis is seen as one of the key technologies which could solve the challenges associated with the increasing diversification of raw materials and energy sources. It is the decisive step in most chemical industry processes, a major method of reducing pollutant emissions from mobile sources and is present in fuel cells to produce electricity. The increasing power of computers over the last decades has led to modeling and numerical simulation becoming valuable tools in heterogeneous catalysis. This book covers many aspects, from the state-of-the-art in modeling and simulations of heterogeneous catalytic reactions on a molecular level to heterogeneous catalytic reactions from an engineering perspective. This first book on the topic conveys expert knowledge from surface science to both chemists and engineers interested in heterogeneous catalysis. The well-known and international authors comprehensively present many aspects of the wide bridge between surface science and catalytic technologies, including DFT calculations, reaction dynamics on surfaces, Monte Carlo simulations, heterogeneous reaction rates, reactions in porous media, electro-catalytic reactions, technical reactors, and perspectives of chemical and automobile industry on modeling heterogeneous catalysis. The result is a one-stop reference for theoretical and physical chemists, catalysis researchers, materials scientists, chemical engineers, and chemists in industry who would like to broaden their horizon and get a substantial overview on the different aspects of modeling and simulation of heterogeneous catalytic reactions.

Download or read book Markov Chain Monte Carlo Simulations and Their Statistical Analysis written by Bernd A. Berg and published by World Scientific. This book was released on 2004 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches modern Markov chain Monte Carlo (MC) simulation techniques step by step. The material should be accessible to advanced undergraduate students and is suitable for a course. It ranges from elementary statistics concepts (the theory behind MC simulations), through conventional Metropolis and heat bath algorithms, autocorrelations and the analysis of the performance of MC algorithms, to advanced topics including the multicanonical approach, cluster algorithms and parallel computing. Therefore, it is also of interest to researchers in the field. The book relates the theory directly to Web-based computer code. This allows readers to get quickly started with their own simulations and to verify many numerical examples easily. The present code is in Fortran 77, for which compilers are freely available. The principles taught are important for users of other programming languages, like C or C++.

Download or read book Computational Modelling of Nanomaterials written by Panagiotis Grammatikopoulos and published by Elsevier. This book was released on 2020-09-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to their small size and their dependence on very fast phenomena, nanomaterials are ideal systems for computational modelling. This book provides an overview of various nanosystems classified by their dimensions: 0D (nanoparticles, QDs, etc.), 1D (nanowires, nanotubes), 2D (thin films, graphene, etc.), 3D (nanostructured bulk materials, devices). Fractal dimensions, such as nanoparticle agglomerates, percolating films and combinations of materials of different dimensionalities are also covered (e.g. epitaxial decoration of nanowires by nanoparticles, i.e. 0D+1D nanomaterials). For each class, the focus will be on growth, structure, and physical/chemical properties. The book presents a broad range of techniques, including density functional theory, molecular dynamics, non-equilibrium molecular dynamics, finite element modelling (FEM), numerical modelling and meso-scale modelling. The focus is on each method's relevance and suitability for the study of materials and phenomena in the nanoscale. This book is an important resource for understanding the mechanisms behind basic properties of nanomaterials, and the major techniques for computational modelling of nanomaterials. - Explores the major modelling techniques used for different classes of nanomaterial - Assesses the best modelling technique to use for each different type of nanomaterials - Discusses the challenges of using certain modelling techniques with specific nanomaterials

Download or read book Monte Carlo Simulation in Statistical Physics written by Kurt Binder and published by Springer. This book was released on 2019-04-30 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth edition of this highly successful textbook provides a detailed introduction to Monte Carlo simulation in statistical physics, which deals with the computer simulation of many-body systems in condensed matter physics and related fields of physics and beyond (traffic flows, stock market fluctuations, etc.). Using random numbers generated by a computer, these powerful simulation methods calculate probability distributions, making it possible to estimate the thermodynamic properties of various systems. The book describes the theoretical background of these methods, enabling newcomers to perform such simulations and to analyse their results. It features a modular structure, with two chapters providing a basic pedagogic introduction plus exercises suitable for university courses; the remaining chapters cover major recent developments in the field. This edition has been updated with two new chapters dealing with recently developed powerful special algorithms and with finite size scaling tools for the study of interfacial phenomena, which are important for nanoscience. Previous editions have been highly praised and widely used by both students and advanced researchers.

Download or read book Modern Heterogeneous Catalysis written by Rutger A. van Santen and published by John Wiley & Sons. This book was released on 2017-02-15 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the world's leading experts on the topic, this advanced textbook is the perfect introduction for newcomers to this exciting field. Concise and clear, the text focuses on such key aspects as kinetics, reaction mechanism and surface reactivity, concentrating on the essentials. The author also covers various catalytic systems, catalysis by design, and activation-deactivation. A website with supplementary material offers additional figures, original material and references.

Download or read book Concepts of Modern Catalysis and Kinetics written by I. Chorkendorff and published by John Wiley & Sons. This book was released on 2017-05-30 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past 12 years since its publication, Concepts of Modern Catalysis and Kinetics has become a standard textbook for graduate students at universities worldwide. Emphasizing fundamentals from thermodynamics, physical chemistry, spectroscopy, solid state chemistry and quantum chemistry, it introduces catalysis from a molecular perspective, and stresses how it is interwoven with the field of reaction kinetics. The authors go on to explain how the world of reacting molecules is connected to the real world of industry, by discussing the various scales (nano - micro - macro) that play a role in catalysis. Reflecting the modern-day focus on energy supplies, this third edition devotes attention to such processes as gas-to-liquids, coal-to-liquids, biomass conversion and hydrogen production. From reviews of the prior editions: 'Overall, this is a valuable book that I will use in teaching undergraduates and postgraduates.' (Angewandte Chemie - I. E.) '...this excellent book is highly recommended to students at technical universities, but also entrants in chemical industry. Furthermore, this informative handbook is also a must for all professionals in the community.' (AFS) 'I am impressed by the coverage of the book and it is a valuable addition to the catalysis literature and I highly recommend purchase' (Energy Sources)

Download or read book Proceedings of the 11th IEA International Workshop on Beryllium Technology BeWS 11 Barcelona Spain 12 13 September 2013 written by Vladimirov, Pavel and published by KIT Scientific Publishing. This book was released on 2015-03-25 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Molecular Modeling of Corrosion Processes written by Christopher D. Taylor and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents opportunities for making significant improvements in preventing harmful effects that can be caused by corrosion Describes concepts of molecular modeling in the context of materials corrosion Includes recent examples of applications of molecular modeling to corrosion phenomena throughout the text Details how molecular modeling can give insights into the multitude of interconnected and complex processes that comprise the corrosion of metals Covered applications include diffusion and electron transfer at metal/electrolyte interfaces, Monte Carlo simulations of corrosion, corrosion inhibition, interrogating surface chemistry, and properties of passive films Presents current challenges and likely developments in this field for the future

Download or read book Reaction Rate Theory and Rare Events written by Baron Peters and published by Elsevier. This book was released on 2017-03-22 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reaction Rate Theory and Rare Events bridges the historical gap between these subjects because the increasingly multidisciplinary nature of scientific research often requires an understanding of both reaction rate theory and the theory of other rare events. The book discusses collision theory, transition state theory, RRKM theory, catalysis, diffusion limited kinetics, mean first passage times, Kramers theory, Grote-Hynes theory, transition path theory, non-adiabatic reactions, electron transfer, and topics from reaction network analysis. It is an essential reference for students, professors and scientists who use reaction rate theory or the theory of rare events. In addition, the book discusses transition state search algorithms, tunneling corrections, transmission coefficients, microkinetic models, kinetic Monte Carlo, transition path sampling, and importance sampling methods. The unified treatment in this book explains why chemical reactions and other rare events, while having many common theoretical foundations, often require very different computational modeling strategies. - Offers an integrated approach to all simulation theories and reaction network analysis, a unique approach not found elsewhere - Gives algorithms in pseudocode for using molecular simulation and computational chemistry methods in studies of rare events - Uses graphics and explicit examples to explain concepts - Includes problem sets developed and tested in a course range from pen-and-paper theoretical problems, to computational exercises

Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.

Download or read book Introduction to Computational Materials Science written by Richard LeSar and published by Cambridge University Press. This book was released on 2013-03-28 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasising essential methods and universal principles, this textbook provides everything students need to understand the basics of simulating materials behavior. All the key topics are covered from electronic structure methods to microstructural evolution, appendices provide crucial background material, and a wealth of practical resources are available online to complete the teaching package. Modeling is examined at a broad range of scales, from the atomic to the mesoscale, providing students with a solid foundation for future study and research. Detailed, accessible explanations of the fundamental equations underpinning materials modelling are presented, including a full chapter summarising essential mathematical background. Extensive appendices, including essential background on classical and quantum mechanics, electrostatics, statistical thermodynamics and linear elasticity, provide the background necessary to fully engage with the fundamentals of computational modelling. Exercises, worked examples, computer codes and discussions of practical implementations methods are all provided online giving students the hands-on experience they need.

Download or read book Computational Methods in Catalysis and Materials Science written by Rutger A. van Santen and published by John Wiley & Sons. This book was released on 2015-11-19 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide describes the basic computational methodologies for catalysis and materials science at an introductory level, presenting the methods with relevant applications, such as spectroscopic properties, chemical reactivity and transport properties of catalytically interesting materials. Edited and authored by internationally recognized scientists, the text provides examples that may be considered and followed as state-of-the art.

Download or read book Concepts of Modern Catalysis and Kinetics written by I. Chorkendorff and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until now, the literature has offered a rather limited approach to the use of fundamental kinetics and their application to catalytic reactions. Subsequently, this book spans the full range from fundamentals of kinetics and heterogeneous catalysis via modern experimental and theoretical results of model studies to their equivalent large-scale industrial production processes. The result is key knowledge for students at technical universities and professionals already working in industry. '... such an enterprise will be of great value to the community, to professionals as well as graduate and undergraduate students attempting to move into the field of modern catalysis and kinetics. I strongly recommend you publish this book based on the proposal.' - Prof. Dr. G. A. Samorjai, University of California 'Both authors are well respected specialists, with a very long record of original top-quality work and an international reputation. A book from these authors will be considered an authoritative piece of work, I definitely support this project and I am looking forward to use the book when published.' - Prof. Dr. D. E. Resasco, University of Oklahoma 'I wholly support the proposed project. The authors are very competent young colleagues and there is a real need for such a textbook' - Prof. Dr. G. Ertl, Fritz-Haber-Institut, Max-Planck-Gesellschaft, Berlin

Download or read book Physics of Surface Interface and Cluster Catalysis written by Hideaki Kasai and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Surface, Interface and Cluster Catalysis reviews the fundamental physics of catalysis from simple surface models through to complex cluster and catalytic structures. It is the first book to provide a coherent collection of the physics of catalysis, and shows how physics has provided and continues to provide clarity and insight into many complex catalysis problems, reviewing both recent developments and prospects for future developments in the field.

Download or read book Computational Science ICCS 2001 written by Vassil N. Alexandrov and published by Springer. This book was released on 2003-05-15 with total page 1294 pages. Available in PDF, EPUB and Kindle. Book excerpt: LNCS volumes 2073 and 2074 contain the proceedings of the International Conference on Computational Science, ICCS 2001, held in San Francisco, California, May 27 -31, 2001. The two volumes consist of more than 230 contributed and invited papers that reflect the aims of the conference to bring together researchers and scientists from mathematics and computer science as basic computing disciplines, researchers from various application areas who are pioneering advanced application of computational methods to sciences such as physics, chemistry, life sciences, and engineering, arts and humanitarian fields, along with software developers and vendors, to discuss problems and solutions in the area, to identify new issues, and to shape future directions for research, as well as to help industrial users apply various advanced computational techniques.

Download or read book Predictive Simulation of Semiconductor Processing written by Jarek Dabrowski and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Simulation of Semiconductor Processing enables researchers and developers to extend the scaling range of semiconductor devices beyond the parameter range of empirical research. It requires a thorough understanding of the basic mechanisms employed in device fabrication, such as diffusion, ion implantation, epitaxy, defect formation and annealing, and contamination. This book presents an in-depth discussion of our current understanding of key processes and identifies areas that require further work in order to achieve the goal of a comprehensive, predictive process simulation tool.