Download or read book Understanding Distributed Systems Second Edition written by Roberto Vitillo and published by Roberto Vitillo. This book was released on 2022-02-23 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning to build distributed systems is hard, especially if they are large scale. It's not that there is a lack of information out there. You can find academic papers, engineering blogs, and even books on the subject. The problem is that the available information is spread out all over the place, and if you were to put it on a spectrum from theory to practice, you would find a lot of material at the two ends but not much in the middle. That is why I decided to write a book that brings together the core theoretical and practical concepts of distributed systems so that you don't have to spend hours connecting the dots. This book will guide you through the fundamentals of large-scale distributed systems, with just enough details and external references to dive deeper. This is the guide I wished existed when I first started out, based on my experience building large distributed systems that scale to millions of requests per second and billions of devices. If you are a developer working on the backend of web or mobile applications (or would like to be!), this book is for you. When building distributed applications, you need to be familiar with the network stack, data consistency models, scalability and reliability patterns, observability best practices, and much more. Although you can build applications without knowing much of that, you will end up spending hours debugging and re-architecting them, learning hard lessons that you could have acquired in a much faster and less painful way. However, if you have several years of experience designing and building highly available and fault-tolerant applications that scale to millions of users, this book might not be for you. As an expert, you are likely looking for depth rather than breadth, and this book focuses more on the latter since it would be impossible to cover the field otherwise. The second edition is a complete rewrite of the previous edition. Every page of the first edition has been reviewed and where appropriate reworked, with new topics covered for the first time.

Download or read book Distributed Algorithms written by Wan Fokkink and published by MIT Press. This book was released on 2013-12-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to distributed algorithms that emphasizes examples and exercises rather than mathematical argumentation.

Download or read book Distributed Systems written by Andrew S Tanenbaum and published by Maarten Van Steen. This book was released on 2023-01-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth edition of "Distributed Systems." We have stayed close to the setup of the third edition, including examples of (part of) existing distributed systems close to where general principles are discussed. For example, we have included material on blockchain systems, and discuss their various components throughout the book. We have, again, used special boxed sections for material that can be skipped at first reading. The text has been thoroughly reviewed, revised, and updated. In particular, all the Python code has been updated to Python3, while at the same time the channel package has been almost completely revised and simplified. Additional material, including coding examples, figures, and slides, are available at www.distributed-systems.net.

Download or read book Introduction to Reliable and Secure Distributed Programming written by Christian Cachin and published by Springer Science & Business Media. This book was released on 2011-02-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern computing a program is usually distributed among several processes. The fundamental challenge when developing reliable and secure distributed programs is to support the cooperation of processes required to execute a common task, even when some of these processes fail. Failures may range from crashes to adversarial attacks by malicious processes. Cachin, Guerraoui, and Rodrigues present an introductory description of fundamental distributed programming abstractions together with algorithms to implement them in distributed systems, where processes are subject to crashes and malicious attacks. The authors follow an incremental approach by first introducing basic abstractions in simple distributed environments, before moving to more sophisticated abstractions and more challenging environments. Each core chapter is devoted to one topic, covering reliable broadcast, shared memory, consensus, and extensions of consensus. For every topic, many exercises and their solutions enhance the understanding This book represents the second edition of "Introduction to Reliable Distributed Programming". Its scope has been extended to include security against malicious actions by non-cooperating processes. This important domain has become widely known under the name "Byzantine fault-tolerance".

Download or read book Distributed Systems written by Andrew S. Tanenbaum and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Distributed Systems, Principles & Paradigms, covers the principles, advanced concepts, and technologies of distributed systems in detail, including: communication, replication, fault tolerance, and security. Intended for use in a senior/graduate level distributed systems course or by professionals, this text systematically shows how distributed systems are designed and implemented in real systems.

Download or read book Guide to Reliable Distributed Systems written by Amy Elser and published by Springer Science & Business Media. This book was released on 2012-01-15 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the key concepts, principles and implementation options for creating high-assurance cloud computing solutions. The guide starts with a broad technical overview and basic introduction to cloud computing, looking at the overall architecture of the cloud, client systems, the modern Internet and cloud computing data centers. It then delves into the core challenges of showing how reliability and fault-tolerance can be abstracted, how the resulting questions can be solved, and how the solutions can be leveraged to create a wide range of practical cloud applications. The author’s style is practical, and the guide should be readily understandable without any special background. Concrete examples are often drawn from real-world settings to illustrate key insights. Appendices show how the most important reliability models can be formalized, describe the API of the Isis2 platform, and offer more than 80 problems at varying levels of difficulty.

Download or read book Designing Distributed Systems written by Brendan Burns and published by "O'Reilly Media, Inc.". This book was released on 2018-02-20 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Without established design patterns to guide them, developers have had to build distributed systems from scratch, and most of these systems are very unique indeed. Today, the increasing use of containers has paved the way for core distributed system patterns and reusable containerized components. This practical guide presents a collection of repeatable, generic patterns to help make the development of reliable distributed systems far more approachable and efficient. Author Brendan Burns—Director of Engineering at Microsoft Azure—demonstrates how you can adapt existing software design patterns for designing and building reliable distributed applications. Systems engineers and application developers will learn how these long-established patterns provide a common language and framework for dramatically increasing the quality of your system. Understand how patterns and reusable components enable the rapid development of reliable distributed systems Use the side-car, adapter, and ambassador patterns to split your application into a group of containers on a single machine Explore loosely coupled multi-node distributed patterns for replication, scaling, and communication between the components Learn distributed system patterns for large-scale batch data processing covering work-queues, event-based processing, and coordinated workflows

Download or read book Advances in Distributed Systems written by Sacha Krakowiak and published by Springer Science & Business Media. This book was released on 2000-02-23 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the main results developed in the course of the European project "Basic Research on Advanced Distributed Computing: From Algorithms to Systems (BROADCAST)". Eight major European research groups in distributed computing cooporated on this projects, from 1992 to 1999. The 21 thoroughly cross-reviewed final full papers present the state-of-the art results on distributed systems in a coherent way. The book is divided in parts on distributed algorithms, systems architecture, applications support, and case studies.

Download or read book Introduction to Distributed Algorithms written by Gerard Tel and published by Cambridge University Press. This book was released on 2000-09-28 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed algorithms have been the subject of intense development over the last twenty years. The second edition of this successful textbook provides an up-to-date introduction both to the topic, and to the theory behind the algorithms. The clear presentation makes the book suitable for advanced undergraduate or graduate courses, whilst the coverage is sufficiently deep to make it useful for practising engineers and researchers. The author concentrates on algorithms for the point-to-point message passing model, and includes algorithms for the implementation of computer communication networks. Other key areas discussed are algorithms for the control of distributed applications (wave, broadcast, election, termination detection, randomized algorithms for anonymous networks, snapshots, deadlock detection, synchronous systems), and fault-tolerance achievable by distributed algorithms. The two new chapters on sense of direction and failure detectors are state-of-the-art and will provide an entry to research in these still-developing topics.

Download or read book Distributed Services with Go written by Travis Jeffery and published by Pragmatic Bookshelf. This book was released on 2020-10-27 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: You know the basics of Go and are eager to put your knowledge to work. This book is just what you need to apply Go to real-world situations. You'll build a distributed service that's highly available, resilient, and scalable. Along the way you'll master the techniques, tools, and tricks that skilled Go programmers use every day to build quality applications. Level up your Go skills today. Take your Go skills to the next level by learning how to design, develop, and deploy a distributed service. Start from the bare essentials of storage handling, then work your way through networking a client and server, and finally to distributing server instances, deployment, and testing. All this will make coding in your day job or side projects easier, faster, and more fun. Lay out your applications and libraries to be modular and easy to maintain. Build networked, secure clients and servers with gRPC. Monitor your applications with metrics, logs, and traces to make them debuggable and reliable. Test and benchmark your applications to ensure they're correct and fast. Build your own distributed services with service discovery and consensus. Write CLIs to configure your applications. Deploy applications to the cloud with Kubernetes and manage them with your own Kubernetes Operator. Dive into writing Go and join the hundreds of thousands who are using it to build software for the real world. What You Need: Go 1.11 and Kubernetes 1.12.

Download or read book An Introduction to Distributed Algorithms written by Valmir C. Barbosa and published by MIT Press. This book was released on 1996 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Distributed Algorithms takes up some of the main concepts and algorithms, ranging from basic to advanced techniques and applications, that underlie the programming of distributed-memory systems such as computer networks, networks of work-stations, and multiprocessors. Written from the broad perspective of distributed-memory systems in general it includes topics such as algorithms for maximum flow, programme debugging, and simulation that do not appear in more orthodox texts on distributed algorithms.

Download or read book Elements of Distributed Computing written by Vijay K. Garg and published by John Wiley & Sons. This book was released on 2002-05-23 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mit der Verfügbarkeit verteilter Systeme wächst der Bedarf an einer fundamentalen Diskussion dieses Gebiets. Hier ist sie! Abgedeckt werden die grundlegenden Konzepte wie Zeit, Zustand, Gleichzeitigkeit, Reihenfolge, Kenntnis, Fehler und Übereinstimmung. Die Betonung liegt auf der Entwicklung allgemeiner Mechanismen, die auf eine Vielzahl von Problemen angewendet werden können. Sorgfältig ausgewählte Beispiele (Taktgeber, Sperren, Kameras, Sensoren, Controller, Slicer und Syncronizer) dienen gleichzeitig der Vertiefung theoretischer Aspekte und deren Umsetzung in die Praxis. Alle vorgestellten Algorithmen werden mit durchschaubaren, induktionsbasierten Verfahren bewiesen.

Download or read book Distributed Systems written by Sukumar Ghosh and published by CRC Press. This book was released on 2014-07-14 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Systems: An Algorithmic Approach, Second Edition provides a balanced and straightforward treatment of the underlying theory and practical applications of distributed computing. As in the previous version, the language is kept as unobscured as possible—clarity is given priority over mathematical formalism. This easily digestible text: Features significant updates that mirror the phenomenal growth of distributed systems Explores new topics related to peer-to-peer and social networks Includes fresh exercises, examples, and case studies Supplying a solid understanding of the key principles of distributed computing and their relationship to real-world applications, Distributed Systems: An Algorithmic Approach, Second Edition makes both an ideal textbook and a handy professional reference.

Download or read book DISTRIBUTED OPERATING SYSTEMS written by PRADEEP K. SINHA and published by PHI Learning Pvt. Ltd.. This book was released on 1998-01-01 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: The highly praised book in communications networking from IEEE Press, now available in the Eastern Economy Edition.This is a non-mathematical introduction to Distributed Operating Systems explaining the fundamental concepts and design principles of this emerging technology. As a textbook for students and as a self-study text for systems managers and software engineers, this book provides a concise and an informal introduction to the subject.

Download or read book Programming Distributed Computing Systems written by Carlos A. Varela and published by MIT Press. This book was released on 2013-05-31 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to fundamental theories of concurrent computation and associated programming languages for developing distributed and mobile computing systems. Starting from the premise that understanding the foundations of concurrent programming is key to developing distributed computing systems, this book first presents the fundamental theories of concurrent computing and then introduces the programming languages that help develop distributed computing systems at a high level of abstraction. The major theories of concurrent computation—including the π-calculus, the actor model, the join calculus, and mobile ambients—are explained with a focus on how they help design and reason about distributed and mobile computing systems. The book then presents programming languages that follow the theoretical models already described, including Pict, SALSA, and JoCaml. The parallel structure of the chapters in both part one (theory) and part two (practice) enable the reader not only to compare the different theories but also to see clearly how a programming language supports a theoretical model. The book is unique in bridging the gap between the theory and the practice of programming distributed computing systems. It can be used as a textbook for graduate and advanced undergraduate students in computer science or as a reference for researchers in the area of programming technology for distributed computing. By presenting theory first, the book allows readers to focus on the essential components of concurrency, distribution, and mobility without getting bogged down in syntactic details of specific programming languages. Once the theory is understood, the practical part of implementing a system in an actual programming language becomes much easier.

Download or read book Designing Data Intensive Applications written by Martin Kleppmann and published by "O'Reilly Media, Inc.". This book was released on 2017-03-16 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data is at the center of many challenges in system design today. Difficult issues need to be figured out, such as scalability, consistency, reliability, efficiency, and maintainability. In addition, we have an overwhelming variety of tools, including relational databases, NoSQL datastores, stream or batch processors, and message brokers. What are the right choices for your application? How do you make sense of all these buzzwords? In this practical and comprehensive guide, author Martin Kleppmann helps you navigate this diverse landscape by examining the pros and cons of various technologies for processing and storing data. Software keeps changing, but the fundamental principles remain the same. With this book, software engineers and architects will learn how to apply those ideas in practice, and how to make full use of data in modern applications. Peer under the hood of the systems you already use, and learn how to use and operate them more effectively Make informed decisions by identifying the strengths and weaknesses of different tools Navigate the trade-offs around consistency, scalability, fault tolerance, and complexity Understand the distributed systems research upon which modern databases are built Peek behind the scenes of major online services, and learn from their architectures

Download or read book Introduction to Distributed Computer Systems written by Ludwik Czaja and published by Springer. This book was released on 2018-01-24 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to selected issues in distributed systems, and primarily focuses on principles, not on technical details. Though the systems discussed are based on existing (von Neumann) computer architectures, the book also touches on emerging processing paradigms. Uniquely, it approaches system components not only as static constructs, but also “in action,” exploring the different states they pass through. The author’s teaching experience shows that newcomers to the field, students and even IT professionals can far more readily grasp the essence of distributed algorithmic structures in action, than on the basis of static descriptions.