Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.

Download or read book The Engineering Index Annual written by and published by . This book was released on 1989 with total page 2152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.

Download or read book Emulsion Polymerization of Vinyl Acetate written by Mohamed S. El-Aasser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is particularly appropriate that this symposium on the emulsion polymeriza tion of vinyl acetate was held in recognition of the industrial importance of poly(vinyl acetate) and vinyl acetate copolymers, and their rather unique properties among emulsion polymers in general. Poly( vinyl acetate) latexes were the first synthetic polymer latexes to be made on a commercial scale: their production using polyvinyl alcohol as emulsifier began in Germany during the mid-1930s and has continued to the present day, growing steadily with the years. Indeed, poly(vinyl acetate) latexes prepared with polyvinyl alcohol are still one of the mainstays of the adhesives industry. With the passing of time, however, vinyl acetate copolymers have been developed: copolymers with maleate esters such as dibutyl maleate, acrylate esters such as ethyl acrylate and butyl acrylate, versatic acid esters, and, more recently, ethylene. These versatile copolymers have found increasing use in more sophisticated adhesives with specialized properties, adhesives for clay coatings on paper, carpet backing, and interior and exterior paints. Thus more than 45 years after the first commercial production of vinyl acetate latexes, their use is still growing, both in actual quantities and different applications. The industrial importance of vinyl acetate latexes makes the mechanism and kinetics of their emulsion polymerization of practical as well as scientific interest.

Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.

Download or read book Polymeric Dispersions Principles and Applications written by J.M. Asua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up to date survey of the science and technology of polymeric dispersions. The book discusses the kinetics and mechanisms of polymerization in dispersed media, examines the processes controlling particle morphology, presents both off-line and on-line methods for the characterization of polymer colloids, considers reactor engineering and control, and covers a wide variety of applications, such as latex paint formulations, encapsulation of inorganic particles, reactive latexes, adhesives, paper coating, and biomedical and pharmaceutical applications. Audience: A valuable resource for scientists and engineers, academic and industrial, who are involved in the manufacture or application of polymeric dispersions.

Download or read book Holographic Sensors written by Ali Kemal Yetisen and published by Springer. This book was released on 2014-12-03 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a theoretical and experimental approach for the rapid fabrication, optimization and testing of holographic sensors for the quantification of pH, organic solvents, metal cations, and glucose in solutions. Developing non-invasive and reusable diagnostics sensors that can be easily manufactured will support the monitoring of high-risk individuals in any clinical or point-of-care setting. Sensor fabrication approaches outlined include silver-halide chemistry, laser ablation and photopolymerization. The sensors employ off-axis Bragg diffraction gratings of ordered silver nanoparticles and localized refractive index changes in poly (2-hydroxyethyl methacrylate) and polyacrylamide films. The sensors exhibited reversible Bragg peak shifts, and diffracted the spectrum of narrow-band light over the wavelength range λpeak ≈ 495-1100 nm. Clinical trials of glucose sensors in the urine samples of diabetic patients demonstrated that they offer superior performance compared to commercial high-throughput urinalysis devices. Lastly, a generic smartphone application to quantify colorimetric tests was developed and tested for both Android and iOS operating systems. The sensing platform and smartphone application may have implications for the development of low-cost, reusable and equipment-free point-of-care diagnostic devices.

Download or read book Polymer Science and Nanotechnology written by Ravin Narain and published by Elsevier. This book was released on 2020-06-16 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Nanotechnology: Fundamentals and Applications brings together the latest advances in polymer science and nanoscience. Sections explain the fundamentals of polymer science, including key aspects and methods in terms of molecular structure, synthesis, characterization, microstructure, phase structure and processing and properties before discussing the materials of particular interest and utility for novel applications, such as hydrogels, natural polymers, smart polymers and polymeric biomaterials. The second part of the book examines essential techniques in nanotechnology, with an emphasis on the utilization of advanced polymeric materials in the context of nanoscience. Throughout the book, chapters are prepared so that materials and products can be geared towards specific applications. Two chapters cover, in detail, major application areas, including fuel and solar cells, tissue engineering, drug and gene delivery, membranes, water treatment and oil recovery. - Presents the latest applications of polymers and polymeric nanomaterials, across energy, biomedical, pharmaceutical, and environmental fields - Contains detailed coverage of polymer nanocomposites, polymer nanoparticles, and hybrid polymer-metallic nanoparticles - Supports an interdisciplinary approach, enabling readers from different disciplines to understand polymer science and nanotechnology and the interface between them

Download or read book Polymer Synthesis Theory and Practice written by Dietrich Braun and published by Springer Science & Business Media. This book was released on 2006-10-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English edition of this book was pubUshed in 1971 with the late Prof. Dr. Werner Kern as coauthor. In 1997, for the preparation of the third edition, Prof. Dr. Helmut Ritter joined the team of authors and in 2001 Prof. Dr. Brigitte Voit and Prof. Dr. Matthias Rehahn complemented this team. The change in authors has not altered the basic concept of this 4th edition: again we were not aimed at compiling a comprehensive collection of recipes. In stead, we attempted to reach a broader description of the general methods and techniques for the synthesis, modification, and characterization of macromo- cules, supplemented by 105 selected and detailed experiments and by sufficient theoretical treatment so that no additional textbook be needed in order to under stand the experiments. In addition to the preparative aspects we have also tried to give the reader an impression of the relation of chemical structure and mor phology of polymers to their properties, as well as of areas of their application.

Download or read book Silicon in Polymer Synthesis written by H.R. Kricheldorf and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon in Polymer Synthesis gives the first concise overview of silicon used for the synthesis and modification of polymers. The first section gives an introduction to the topic. The subsequent chapters detail the current status both from the basic research as well as from the industrial application points of view.

Download or read book Dispersed Systems written by and published by Steinkopff. This book was released on 2014-03-12 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Research inPolymerization written by Nevin Çankaya and published by BoD – Books on Demand. This book was released on 2018-01-17 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to help you concentrate on recent developments in polymerization. The chapters collected in the book are contributions by invited researchers with a long-standing experience in different research areas. I hope that the material presented here is understandable to a broad audience, not only chemists but also scientists from various disciplines. The book contains nine chapters in three sections: (1) "General Information about Polymerization," (2) "Biomaterial Content Polymer Composites," and (3) "Mechanical Properties of Polymerization." The book provides detailed and current reviews in these different areas written by experts in their respective fields. This book is expected to be useful for polymer workers and other scientists alike and contribute to the training of current and future researchers, academics, PhD degree students, as well as other scientists.

Download or read book Applications of Ionic Liquids in Polymer Science and Technology written by David Mecerreyes and published by Springer. This book was released on 2015-04-08 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the latest knowledge in the science and technology of ionic liquids and polymers in different areas. Ionic liquids (IL) are actively being investigated in polymer science and technology for a number of different applications. In the first part of the book the authors present the particular properties of ionic liquids as speciality solvents. The state-of-the art in the use of ionic liquids in polymer synthesis and modification reactions including polymer recycling is outlined. The second part focuses on the use of ionic liquids as speciality additives such as plasticizers or antistatic agents. The third part examines the use of ionic liquids in the design of functional polymers (usually called polymeric ionic liquids (PIL) or poly(ionic liquids)). Many important applications in diverse scientific and industrial areas rely on these polymers, like polymer electrolytes in electrochemical devices, building blocks in materials science, nanocomposites, gas membranes, innovative anion sensitive materials, smart surfaces, and a countless set range of emerging applications in different fields such as energy, optoelectronics, analytical chemistry, biotechnology, nanomedicine or catalysis.

Download or read book Nanoemulsions written by Seid Mahdi Jafari and published by Academic Press. This book was released on 2018-02-24 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoemulsions: Formulation, Applications, and Characterization provides detailed information on the production, application and characterization of food nanoemulsion as presented by experts who share a wealth of experience. Those involved in the nutraceutical, pharmaceutical and cosmetic industries will find this a useful reference as it addresses findings related to different preparation and formulation methods of nanoemulsions and their application in different fields and products. As the last decade has seen a major shift from conventional emulsification processes towards nanoemulsions that both increase the efficiency and stability of emulsions and improve targeted drug and nutraceutical delivery, this book is a timely resource. - Summarizes general aspects of food nanoemulsions and their formulation - Provides detailed information on the production, application, and characterization of food nanoemulsion - Reveals the potential of nanoemulsions, as well as their novel applications in functional foods, nutraceutical products, delivery systems, and cosmetic formulations - Explains preparation of nanoemulsions by both low- and high-energy methods

Download or read book Polyampholytes written by Sarkyt E. Kudaibergenov and published by Springer Science & Business Media. This book was released on 2002-04-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews the synthesis, characterization and application aspects of linear and crosslinked synthetic polyampholytes - simple model of biopolymers - starting from the 1950's. The synthetic strategy of "annealed", "quenched" and "zwitterionic" polyampholytes, the properties of polyampholytes in solutions and in gel state are considered. The complexation ability of polyampholytes with respect to transition metal ions, ionic surfactants, dyes and organic probes polyelectrolytes, proteins and colloid particles is discussed. Stimuli-sensitive behavior of various amphoteric gel and membrane systems demonstrating rhythmically phenomenon similar to that of heart beat, deformation, oscillation or self-oscillation phenomena stimulated by temperature, pH and electric field are illustrated. Catalytic properties of synthetic polyampholytes simulating the function of enzymes are also considered.

Download or read book Handbook of RAFT Polymerization written by Christopher Barner-Kowollik and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spanning the entire field from fundamentals to applications in material science, this one-stop source is the first comprehensive reference for polymer, physical and surface chemists, materials scientists, chemical engineers, and those chemists working in industry. From the contents: * Introduction: Living Free Radical Polymerization and the RAFT Process * Fundamental Structure-Reactivity Correlations Governing the RAFT Process * Mechanism and Kinetics * The RAFT Process as a Kinetic Tool * Theory and Practice in Technical Applications * RAFT Polymerization in Bulk and Organic Solvents, as well as Homogeneous Aqueous Systems * Emulsion and Mini-Emulsion Polymerization * Complex Architecture Design * Macromolecular Design via the Interchange of Xanthates * Surface Modification * Stability and Physical Properties of RAFT Polymers * Novel Materials: From Drug Delivery to Opto-Electronics * Outlook and Future Developments

Download or read book Polymeric Surfactants written by Tharwat F. Tadros and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-05-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Surfactants covers the structure and stability origins of these highly useful surfactants. Adsorption and solution properties in emulsions are discussed based on their underlying thermodynamics and kinetics. Research scientists and Ph.D. students investigating chemistry, chemical engineering and colloidal science will benefit from this text on polymeric surfactants and their value in preparation and stabilization of disperse systems.

Download or read book Polymer Therapeutics I written by Ronit Satchi-Fainaro and published by Springer Science & Business Media. This book was released on 2006-02-10 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: