Download or read book The Aerodynamics of Heavy Vehicles III written by Andreas Dillmann and published by Springer. This book was released on 2015-08-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at the International conference “The Aerodynamics of Heavy Vehicles III: Trucks, Buses and Trains” held in Potsdam, Germany, September 12-17, 2010 by Engineering Conferences International (ECI). Leading scientists and engineers from industry, universities and research laboratories, including truck and high-speed train manufacturers and operators were brought together to discuss computer simulation and experimental techniques to be applied for the design of more efficient trucks, buses and high-speed trains in the future. This conference was the third in the series after Monterey-Pacific Groove in 2002 and Lake Tahoe in 2007.The presentations address different aspects of train aerodynamics (cross wind effects, underbody flow, tunnel aerodynamics and aeroacoustics, experimental techniques), truck aerodynamics (drag reduction, flow control, experimental and computational techniques) as well as computational fluid dynamics and bluff body, wake and jet flows.
Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2013-07-30 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is our pleasure to present these proceedings from the United Engineering Foundation Conference on The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held December 2-6, 2002, in Monterey, California. This Department of Energy, United Engineering Foundation, and industry sponsored conference brought together 90 leading engineering researchers from around the world to discuss the aerodynamic drag of heavy vehicles. Participants from national labs, academia, and industry, including truck manufacturers, discussed how computer simulation and experimental techniques could be used to design more fuel efficient trucks, buses, and trains. Conference topics included comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from the Department of Energy sponsored and other wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry were presented, along with their use in evaluating drag reduction devices. We would like to thank the UEF conference organizers for their dedication and quick response to sudden deadlines. In addition, we would like to thank all session chairs, the scientific advisory committee, authors, and reviewers for their many hours of dedicated effort that contributed to a successful conference and resulted in this document of the conference proceedings. We also gratefully acknowledge the support received from the United Engineering Foundation, the US Department of Energy, Lawrence Livermore National Laboratory, Volvo Trucks America, International Truck and Engine Corporation, and Freightliner LLC.
Download or read book The Aerodynamics of Heavy Vehicles Trucks Buses and Trains written by Rose McCallen and published by Springer Science & Business Media. This book was released on 2004-09 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the carefully edited contributions to the United Engineering Foundation Conference: The Aerodynamics of Heavy Vehicles: Trucks, Buses and Trains held in Monterey, California from December 2-6, 2002. This conference brought together 90 leading engineering researchers discussing the aerodynamic drag of heavy vehicles. The book topics include a comparison of computational fluid dynamics calculations using both steady and unsteady Reynolds-averaged Navier-Stokes, large-eddy simulation, and hybrid turbulence models and experimental data obtained from wind tunnel experiments. Advanced experimental techniques including three-dimensional particle image velocimetry are presented as well, along with their use in evaluating drag reduction devices.
Download or read book Train Aerodynamics written by Chris Baker and published by Butterworth-Heinemann. This book was released on 2019-06-12 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Train Aerodynamics: Fundamentals and Applications is the first reference to provide a comprehensive overview of train aerodynamics with full scale data results. With the most up-to-date information on recent advances and the possibilities of improvement in railway facilities, this book will benefit railway engineers, train operators, train manufacturers, infrastructure managers and researchers of train aerodynamics. As the subject of train aerodynamics has evolved slowly over the last few decades with train speeds gradually increasing, and as a result of increasing interest in new train types and high-speed lines, this book provides a timely resource on the topic. - Examines the fundamentals and the state-of-the-art of train aerodynamics, beginning with experimental, numerical and analytical tools, and then thoroughly discussing the specific approaches in other sections - Features the latest developments and progress in computational aerodynamics and experimental facilities - Addresses problems relating to train aerodynamics, from the dimensioning of railway structures and trains, to risk analysis related to safety issues and maintenance - Discusses basic flow patterns caused by bridges and embankments
Download or read book Aerodynamics of Road Vehicles written by Wolf-Heinrich Hucho and published by Elsevier. This book was released on 2013-10-22 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics of Road Vehicles details the aerodynamics of passenger cars, commercial vehicles, sports cars, and race cars; their external flow field; as well as their internal flow field. The book, after giving an introduction to automobile aerodynamics and some fundamentals of fluid mechanics, covers topics such as the performance and aerodynamics of different kinds of vehicles, as well as test techniques for their aerodynamics. The book also covers other concepts related to automobiles such as cooling systems and ventilations for vehicles. The text is recommended for mechanical engineers and phycisists in the automobile industry who would like to understand more about aerodynamics of motor vehicles and its importance on the field of road safety and automobile production.
Download or read book Engineering Turbulence Modelling and Experiments 3 written by G. Bergeles and published by Newnes. This book was released on 2012-12-02 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discussses new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. At present, turbulence is one of the key issues in tackling engineering flow problems. Powerful computers and numerical methods are now available for solving the flow equations, but the simulation of turbulence effects which are nearly always important in practice, is still in an unsatisfactory state and introduces considerable uncertainities in the accuracy of CFD calculations. These and other aspects of turbulence modelling and measurements are dealt with in detail by experts in the field. The resulting book is an up-to-date review of the most recent research in this exciting area.
Download or read book Cumulative Index of The SAE Papers written by Society of Automotive Engineers and published by . This book was released on 1965 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Progress in Vehicle Aerodynamics and Thermal Management written by Jochen Wiedemann and published by Springer. This book was released on 2017-12-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The books presents latest information about new car developments, new or improved testing techniques and new or improved calculation procedures. Presenters are from industry and academia.
Download or read book The Numerical Simulation of Fluid Flow written by Robert Castilla and published by Mdpi AG. This book was released on 2022-02-17 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the accepted contributions to the Special Issue "The Numerical Simulation of Fluid Flow" in the Energies journal of MDPI. It is focused more on practical applications of numerical codes than in its development. It covers a wide variety of topics, from aeroacoustics to aerodynamics and flow-particles interaction.
Download or read book New Technologies Development and Application III written by Isak Karabegović and published by Springer Nature. This book was released on 2020-05-04 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book features papers presented at the International Conference on New Technologies, Development and Application, held at the Academy of Sciences and Arts of Bosnia and Herzegovina in Sarajevo on 25th–27th June 2020. It covers a wide range of future technologies and technical disciplines, including complex systems such as Industry 4.0; patents in Industry 4.0; robotics; mechatronics systems; automation; manufacturing; cyber-physical and autonomous systems; sensors; networks; control; energy and renewable energy sources; automotive and biological systems; vehicular networking and connected vehicles; effectiveness and logistics systems; smart grids; nonlinear systems; power; social and economic systems; education; and IoT. The book focuses on the Fourth Industrial Revolution “Industry 4.0,” in which implementation will improve many aspects of human life in all segments and lead to changes in business paradigms and production models. Further, new business methods are emerging, transforming production systems, transport, delivery, and consumption, which need to be monitored and implemented by every company involved in the global market.
Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Download or read book Race Car Aerodynamics written by J Katz and published by Robert Bentley, Incorporated. This book was released on 1996-03-08 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to summarize the secrets of the rapidly developing field of high-speed vehicle design. From F1 to Indy Car, Drag and Sedan racing, this book provides clear explanations for engineers who want to improve their design skills and enthusiasts who simply want to understand how their favorite race cars go fast. Explains how aerodynamics win races, why downforce is more important than streamlining and drag reduction, designing wings and venturis, plus wind tunnel designs and more.
Download or read book The International Vehicle Aerodynamics Conference written by IMechE and published by Woodhead Publishing. This book was released on 2014-11-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerodynamics has never been more central to the development of cars, commercial vehicles, motorbikes, trains and human powered vehicles, driven by the need for efficiency: reducing carbon dioxide emissions, reducing fuel consumption, increasing range and alleviating problems associated with traffic congestion. Reducing vehicle weight makes it more challenging to ensure that they are stable and handle well over a wide range of environmental conditions. Lighter structures are also more vulnerable to aerodynamically induced vibration. Alongside this, customers demand an environment that is quiet, comfortable and maintains their vision of the world around them in all weathers. These aims must be met by designing vehicles that engage customers emotionally, promoting the brand values of manufacturers and operators. This can only be done by collaboration between designers and aerodynamicists. - Examine the latest developments in vehicle aerodynamic development - Explore opportunities to network and share experiences around different areas - Focus on future challenges and the engineering knowledge and technology required to resolve them - Discuss other areas of development including handling and stability, tyre aerodynamics and modelling, aeroacoustics and fluid structure interaction
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Image Velocimetry written by Ronald J. Adrian and published by Cambridge University Press. This book was released on 2011 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle image velocimetry, or PIV, refers to a class of methods used in experimental fluid mechanics to determine instantaneous fields of the vector velocity by measuring the displacements of numerous fine particles that accurately follow the motion of the fluid. Although the concept of measuring particle displacements is simple in essence, the factors that need to be addressed to design and implement PIV systems that achieve reliable, accurate, and fast measurements and to interpret the results are surprisingly numerous. The aim of this book is to analyze and explain them comprehensively.
Download or read book A Comprehensive Study of Detached Eddy Simulation written by Charles Mockett and published by Univerlagtuberlin. This book was released on 2009 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aerodynamics of Road Vehicles written by Thomas Christian Schuetz and published by SAE International. This book was released on 2015-12-30 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The detailed presentation of fundamental aerodynamics principles that influence and improve vehicle design have made Aerodynamics of Road Vehicles the engineer’s “source” for information. This fifth edition features updated and expanded information beyond that which was presented in previous releases. Completely new content covers lateral stability, safety and comfort, wind noise, high performance vehicles, helmets, engine cooling, and computational fluid dynamics. A proven, successful engineering design approach is presented that includes: • Fundamentals of fluid mechanics related to vehicle aerodynamics • Essential experimental results that are the ground rules of fluid mechanics • Design strategies for individual experimental results • General design solutions from combined experimental results The aerodynamics of passenger cars, commercial vehicles, motorcycles, sports cars, and race cars is dealt with in detail, inclusive of systems, testing techniques, measuring and numerical aerodynamics methods and simulations that significantly contribute to vehicle development. Aerodynamics of Road Vehicles is an excellent reference tool and an indispensable source for the industry’s vehicle engineers, designers, and researchers, as well as for enthusiasts, students, and those working in academia or government regulatory agencies.
