Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Download or read book Manufacturing System and Process Development for Vehicle Assembly written by He Tang and published by SAE International. This book was released on 2017-12-20 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution and execution of automotive manufacturing are explored in this fundamental manual. It is an excellent reference for entry level manufacturing engineers and also serves as a training guide for nonmanufacturing professionals. The book covers the major areas of vehicle assembly manufacturing and addresses common approaches and procedures of the development process. Having held positions as both a University Professor and as a Lead Engineering Specialist in industry, the author draws on his experience in both theory and application to fill the gap between academic research and industrial practices. This concisely written, comprehensive review discusses the sophisticated principles and concepts of automotive manufacturing from development to applications and includes: 250 illustrations and 90 tables. End-of-chapter review questions. Research topics for in-depth case studies, literature reviews, and/or course projects. Analytical problems for additional practice. Directly extracted and summarized from automotive manufacturing practices, this book serves as an essential manual. The subject is complemented by the author’s first book, Automotive Vehicle Assembly Processes and Operations Management, which provides even greater depth to the complex endeavor of modern automotive manufacturing.

Download or read book Materials for Automobile Bodies written by Geoffrey Davies and published by Butterworth-Heinemann. This book was released on 2012-03-30 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1 Introduction -- 2 Design and material utilization -- 3 Materials for consideration and use in automotive body structures -- 4 The role of demonstration, concept and competition cars -- 5 Component manufacture -- 6 Component assembly: materials joining technology -- 7 Corrosion and protection of the automotive structure -- 8 Environmental considerations -- 9 Future trends in automotive body materials.

Download or read book Automotive Vehicle Assembly Processes and Operations Management written by He Tang and published by SAE International. This book was released on 2017-01-30 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proven technologies and processes are explored in this examination of modern automotive manufacturing. Fundamentals and applications, as well as new advances are discussed as the author bridges the gap between academic research and industrial practice. Having held positions as both a University Professor and as a Lead Engineering Specialist in industry, the author presents a concise understanding that reflects both technical and managerial perspectives with the aim of providing improvement through practical methods. Each chapter includes review questions and research topics, and, in addition, analysis problems are often included that comprehensively address: • Automotive Industry and Competition • Manufacturing Operations • Joining and Paint Processes • Production Operations and Quality Management • Performance Improvement Directly extracted and summarized from automotive manufacturing practices, this book serves as a fundamental manual. The subject is complemented by the author’s second book, Manufacturing System and Process Development for Vehicle Assembly, which provides even greater depth to the subject of modern automotive manufacturing.

Download or read book Introducing New Materials in the Automotive Industry written by Fredrik Henriksson and published by Linköping University Electronic Press. This book was released on 2017-11-08 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: Passenger vehicles are central to Western society, and contribute to a significant part of our greenhouse gas emissions. In order to reduce emissions, the automotive industry as a whole is working to reduce mass in passenger vehicles in order to reduce energy consumption. One way to reduce mass is to introduce lightweight materials in the body of the vehicle. This research aims to explore the relationship between product and production system when introducing new materials. Besides a theoretical review and an industry-centered technological mapping, four case studies have been conducted during the course of this licentiate thesis. Two case studies were conducted with engineering design students working as development teams, one case study with the author as the developer and finally one case study in an industrial environment at a product owning company with in-house production. The goal of the case studies has been to increase the collective knowledge of how product development decisions affect production development decisions, and vice versa, when developing passenger vehicles in new materials. In the following analysis of case study outcomes, a number of factors important for introducing new materials are discussed. The relationship between product and production is investigated, both in terms of how the production system affects the product and how the product affects the production system. The outcome from this analysis is a mapping of important factors for automotive industry companies to understand and identify when looking at introducing new materials in existing production systems. Finally, a suggestion for future research efforts is presented.

Download or read book Developments in Automotive Fuel Economy Technology written by United States. Congress. Senate. Committee on Commerce, Science, and Transportation. Subcommittee on the Consumer and published by . This book was released on 1992 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Multi Material Lightweight Vehicle MMLV Project written by David Wagner and published by SAE International. This book was released on 2015-06-05 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: The desire for greater fuel efficiency and reduced emissions have accelerated a shift from traditional materials to design solutions that more closely match materials and their properties with key applications. The Multi-Material Lightweight Vehicle (MMLV) Project presents cutting edge engineering that meets future challenges in a concept vehicle with weight and life-cycle assessment savings. These results significantly contribute to achieving fuel reduction and to meeting future Corporate Average Fuel Economy (CAFÉ) regulations without compromising vehicle performance or occupant safety. The MMLV Project presents: • Lightweight materials applications. • Body in white design and computer aided engineering • Engine and transmission design and lightweighting. • Full vehicle test results that are specific to the MMLV subsystems including crash, corrosion, durability and Noise Vibration and Harshness (NVH). • The Life Cycle Analysis (LCA) for the MMLV The aluminum-intensive structure, combined with carbon fiber, magnesium, and titanium results in full vehicle mass reduction of a C/D class family sedan to that of a subcompact B-car (two vehicle segments lighter). The MMLV Project presents engineering solutions that frame materials selection and applications for the future.

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. - Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry - Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications - Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Handbook of Research on Advancements in Manufacturing Materials and Mechanical Engineering written by Burstein, Leonid and published by IGI Global. This book was released on 2020-09-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production, new materials development, and mechanics are the central subjects of modern industry and advanced science. With a very broad reach across several different disciplines, selecting the most forward-thinking research to review can be a hefty task, especially for study in niche applications that receive little coverage. For those subjects, collecting the research available is of utmost importance. The Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering is an essential reference source that examines emerging obstacles in these fields of engineering and the methods and tools used to find solutions. Featuring coverage of a broad range of topics including fabricating procedures, automated control, and material selection, this book is ideally designed for academics; tribology and materials researchers; mechanical, physics, and materials engineers; professionals in related industries; scientists; and students.

Download or read book Proceedings of China SAE Congress 2022 Selected Papers written by China Society of Automotive Engineers and published by Springer Nature. This book was released on 2023-05-30 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the China SAE Congress 2022, featuring contributions mainly from China, the biggest carmaker as well as most dynamic car market in the world. The book covers a wide range of automotive-related topics and the latest technical advances in the industry. Many of the approaches in the book help technicians to solve practical problems that affect their daily work. In addition, the book offers valuable technical support to engineers, researchers, and postgraduate students in the field of automotive engineering.

Download or read book Advanced Materials by Design written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Report on the Second International Technical Conference on Experimental Safety Vehicles written by and published by . This book was released on 1971 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Review of the 21st Century Truck Partnership written by National Research Council and published by National Academies Press. This book was released on 2008-10-19 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 21st Century Truck Partnership (21CTP), a cooperative research and development partnership formed by four federal agencies with 15 industrial partners, was launched in the year 2000 with high hopes that it would dramatically advance the technologies used in trucks and buses, yielding a cleaner, safer, more efficient generation of vehicles. Review of the 21st Century Truck Partnership critically examines and comments on the overall adequacy and balance of the 21CTP. The book reviews how well the program has accomplished its goals, evaluates progress in the program, and makes recommendations to improve the likelihood of the Partnership meeting its goals. Key recommendations of the book include that the 21CTP should be continued, but the future program should be revised and better balanced. A clearer goal setting strategy should be developed, and the goals should be clearly stated in measurable engineering terms and reviewed periodically so as to be based on the available funds.

Download or read book Lightweight Electric Hybrid Vehicle Design written by John Fenton and published by Elsevier. This book was released on 2001-07-04 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight Electric/Hybrid Vehicle Design covers the particular automotive design approach required for hybrid/electrical drive vehicles. There is currently huge investment world-wide in electric vehicle propulsion, driven by concern for pollution control and depleting oil resources. The radically different design demands of these new vehicles requires a completely new approach that is covered comprehensively in this book. The book explores the rather dramatic departures in structural configuration necessary for purpose-designed electric vehicle including weight removal in the mechanical systems. It also provides a comprehensive review of the design process in the electric hybrid drive and energy storage systems. Ideal for automotive engineering students and professionals Lightweight Electric/Hybrid Vehicle Design provides a complete introduction to this important new sector of the industry. - Comprehensive coverage of all design aspects of electric/hybrid cars in a single volume - Packed with case studies and applications - In-depth treatment written in a text book style (rather than a theoretical specialist text style)

Download or read book New Trends and Developments in Automotive Industry written by Marcello Chiaberge and published by BoD – Books on Demand. This book was released on 2011-01-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is divided in five main parts (production technology, system production, machinery, design and materials) and tries to show emerging solutions in automotive industry fields related to OEMs and no-OEMs sectors in order to show the vitality of this leading industry for worldwide economies and related important impacts on other industrial sectors and their environmental sub-products.

Download or read book Report International Technical Conference on Experimental Safety Vehicles written by and published by . This book was released on 1971 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: