Download or read book An Algorithm for Computing the Range of Trimable Angle of Attack for Aircraft Experiencing Effector Failures written by Joseph Kaloust and published by . This book was released on 2002 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper presents a method for computing the range of angle of attack for which an air vehicle can be rotationally trimmed when experiencing control effector failures. The algorithms are applied to an unpowered reentry vehicle as an example. Types of failures considered include floating effectors that do not contribute to the aerodynamic forces and moments or effectors that are locked at a given position within the effector displacement range. The algorithm can provide critical information to online trajectory generators or path planners for autonomous air vehicles.
Download or read book An Algorithm for Digital Resolution of Range for V STOL Aircraft written by Gilbert G. Robinson and published by . This book was released on 1971 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Efficient Algorithms for Computing Trim and Small disturbance Equations of Motion of Aircraft Coordinated and Uncoordinated Steady Steep Turns written by and published by . This book was released on 1983 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Limiting Modes of Aircraft Flight written by Alexander Nikolaevich Akimov and published by Springer Nature. This book was released on 2022-10-31 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes in detail a method of direct optimization, which makes it possible to choose the best trajectory of an aircraft in conditions of its limited resource. This can happen in the event of an emergency on board, associated with both a possible equipment failure and external influences, for example, when lightning strikes an aircraft or collides with a moving object. The highlight of this book is the fact that the results presented in it can be applied universally to the choice of the flight path of large and small aircraft, as well as helicopter technology. In addition, they take into account various conditions of aircraft flight, including a possible accident. The methods and algorithms presented here can be used as the basis for the creation of automatic collision avoidance systems, as well as the choice of the best aircraft trajectory for flights in different regions and in different conditions.
Download or read book On Problems of Flight Over an Extended Angle of attack Range written by H.H.B.M. Thomas and published by . This book was released on 1971 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Techniques for Clearance of Flight Control Laws written by Chris Fielding and published by Springer Science & Business Media. This book was released on 2002-09-05 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book recent results of the GARTEUR (Group for Aeronautical Research and Technology in Europe) Action Group FM (AG11) are presented. The book focuses on analysis techniques for the flight clearance of highly augmented aircrafts, including contributions of 20 European aeronautical organisations such as National Research Centers, Aerospace Industries and Universities. The tasks and requirements of the Industrial Clearance Process for Flight Control Laws are presented as well as classical and particularly new analysis methods. The different methods are evaluated and compared and their potential application to Civil Aircraft is demonstrated.
Download or read book Fault Diagnosis and Fault Tolerant Control and Guidance for Aerospace Vehicles written by Ali Zolghadri and published by Springer Science & Business Media. This book was released on 2013-10-07 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace demonstrates the attractive potential of recent developments in control for resolving such issues as flight performance, self protection and extended-life structures. Importantly, the text deals with a number of practically significant considerations: tuning, complexity of design, real-time capability, evaluation of worst-case performance, robustness in harsh environments, and extensibility when development or adaptation is required. Coverage of such issues helps to draw the advanced concepts arising from academic research back towards the technological concerns of industry. Initial coverage of basic definitions and ideas and a literature review gives way to a treatment of electrical flight control system failures: oscillatory failure, runaway, and jamming. Advanced fault detection and diagnosis for linear and linear-parameter-varying systems are described. Lastly recovery strategies appropriate to remaining actuator/sensor/communications resources are developed. The authors exploit experience gained in research collaboration with academic and major industrial partners to validate advanced fault diagnosis and fault-tolerant control techniques with realistic benchmarks or real-world aeronautical and space systems. Consequently, the results presented in Fault Diagnosis and Fault-Tolerant Control and Guidance for Aerospace, will be of interest in both academic and aerospatial-industrial milieux.
Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.
Download or read book Advances in Aerospace Guidance Navigation and Control written by Florian Holzapfel and published by Springer Science & Business Media. This book was released on 2011-03-15 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few decades, both the aeronautics and space disciplines have greatly influenced advances in controls, sensors, data fusion and navigation. Many of those achievements that made the word “aerospace” synonymous with “high–tech” were enabled by innovations in guidance, navigation and control. Europe has seen a strong trans-national consolidation process in aerospace over the last few decades. Most of the visible products, like commercial aircraft, fighters, helicopters, satellites, launchers or missiles, are not made by a single country – they are the fruits of cooperation. No European country by itself hosts a specialized guidance, navigation and controls community large enough to cover the whole spectrum of disciplines. However, on a European scale, mutual exchange of ideas, concepts and solutions is enriching for all. The 1st CEAS Specialist Conference on Guidance, Navigation and Control is an attempt to bring this community together. This book is a selection of papers presented at the conference. All submitted papers have gone through a formal review process in compliance with good journal practices. The best papers have been recommended by the reviewers to be published in this book.
Download or read book In Flight Simulators and Fly by Wire Light Demonstrators written by Peter G. Hamel and published by Springer. This book was released on 2017-03-15 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the first complete account of more than sixty years of international research on In-Flight Simulation and related development of electronic and electro-optic flight control system technologies (“Fly-by-Wire” and “Fly-by-Light”). They have provided a versatile and experimental procedure that is of particular importance for verification, optimization, and evaluation of flying qualities and flight safety of manned or unmanned aircraft systems. Extensive coverage is given in the book to both fundamental information related to flight testing and state-of-the-art advances in the design and implementation of electronic and electro-optic flight control systems, which have made In-Flight Simulation possible. Written by experts, the respective chapters clearly show the interdependence between various aeronautical disciplines and in-flight simulation methods. Taken together, they form a truly multidisciplinary book that addresses the needs of not just flight test engi neers, but also other aeronautical scientists, engineers and project managers and historians as well. Students with a general interest in aeronautics as well as researchers in countries with growing aeronautical ambitions will also find the book useful. The omission of mathematical equations and in-depth theoretical discussions in favor of fresh discussions on innovative experiments, together with the inclusion of anecdotes and fascinating photos, make this book not only an enjoyable read, but also an important incentive to future research. The book, translated from the German by Ravindra Jategaonkar, is an extended and revised English edition of the book Fliegende Simulatoren und Technologieträger , edited by Peter Hamel and published by Appelhans in 2014.
Download or read book Flight test guide for certification of transport category airplanes written by and published by . This book was released on 1986 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nonlinear Analysis and Synthesis Techniques for Aircraft Control written by Declan Bates and published by Springer. This book was released on 2007-10-04 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to focus on the use of nonlinear analysis and synthesis techniques for aircraft control. It is also the first book to address in detail closed-loop control problems for aircraft "on-ground" – i.e. speed and directional control of aircraft before take-off and after touch down. The book will be of interest to engineers, researchers, and students in control engineering, and especially aircraft control.
Download or read book Science and Technology in Historic Preservation written by Ray A. Williamson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology transfer has played an increasingly important role in historic preservation during the latter half of the twentieth century, a situation attested to by the undertaking of an important congressional study in 1986 that assessed the role of federal agencies in the field. In this book leading researchers update the earlier findings and contribute state-of-the-art reviews and evaluations of technological progress in their areas of expertise.
Download or read book Stability and Control of Conventional and Unconventional Aerospace Vehicle Configurations written by Bernd Chudoba and published by Springer. This book was released on 2019-07-23 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a stability and control methodology named AeroMech, capable of sizing the primary control effectors of fixed wing subsonic to hypersonic designs of conventional and unconventional configuration layout. Control power demands are harmonized with static-, dynamic-, and maneuver stability requirements, while taking the six-degree-of-freedom trim state into account. The stability and control analysis solves the static- and dynamic equations of motion combined with non-linear vortex lattice aerodynamics for analysis. The true complexity of addressing subsonic to hypersonic vehicle stability and control during the conceptual design phase is hidden in the objective to develop a generic (vehicle configuration independent) methodology concept. The inclusion of geometrically asymmetric aircraft layouts, in addition to the reasonably well-known symmetric aircraft types, contributes significantly to the overall technical complexity and level of abstraction. The first three chapters describe the preparatory work invested along with the research strategy devised, thereby placing strong emphasis on systematic and thorough knowledge utilization. The engineering-scientific method itself is derived throughout the second half of the book. This book offers a unique aerospace vehicle configuration independent (generic) methodology and mathematical algorithm. The approach satisfies the initial technical quest: How to develop a ‘configuration stability & control’ methodology module for an advanced multi-disciplinary aerospace vehicle design synthesis environment that permits consistent aerospace vehicle design evaluations?
Download or read book Airplane Design VII written by Jan Roskam and published by DARcorporation. This book was released on 1985 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Green Aviation written by Ramesh Agarwal and published by John Wiley & Sons. This book was released on 2016-10-17 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Aviation is the first authoritative overview of both engineering and operational measures to mitigate the environmental impact of aviation. It addresses the current status of measures to reduce the environmental impact of air travel. The chapters cover such items as: Engineering and technology-related subjects (aerodynamics, engines, fuels, structures, etc.), Operations (air traffic management and infrastructure) Policy and regulatory aspects regarding atmospheric and noise pollution. With contributions from leading experts, this volume is intended to be a valuable addition, and useful resource, for aerospace manufacturers and suppliers, governmental and industrial aerospace research establishments, airline and aviation industries, university engineering and science departments, and industry analysts, consultants, and researchers.
