Download or read book Am lioration de l activit catalytique de m taux de transition par voie lectrochimique written by Gilles Falgayrac and published by . This book was released on 1996 with total page 195 pages. Available in PDF, EPUB and Kindle. Book excerpt: CE TRAVAIL TRAITE DE L'UTILISATION DE TECHNIQUES ELECTROCHIMIQUES EN VUE D'OXYDATION D'ALKYLAROMATIQUES EN SOLUTION DANS L'ACIDE ACETIQUE. L'ETUDE A PORTE EN PARTICULIER SUR L'OXYDATION DU P-METHOXYTOLUENE ET DU TOLUENE EN ALDEHYDES ET ACIDES CORRESPONDANTS. L'ETUDE PRELIMINAIRE DE L'OXYDATION DE DIVERS TOLUENES SUR ELECTRODE TOURNANTE DE PLATINE A REVELE QUE LA PASSIVATION DE L'ANODE POUVAIT ETRE EVITEE DANS UNE SOLUTION SATUREE EN OXYGENE. L'OXYDATION ANODIQUE DIRECTE DU P-METHOXYTOLUENE SUR ELECTRODE DE GRAPHITE CONDUIT A LA FORMATION D'ACETATE DE P-ANISYLE COMME PRODUIT PRINCIPAL DANS L'ACIDE ACETIQUE PUR ET A LA FORMATION DE P-ANISALDEHYDE COMME PRODUIT PRINCIPAL DANS UN MELANGE ACIDE ACETIQUE/EAU. L'OXYDATION INDIRECTE DU P-METHOXYTOLUENE OU DU TOLUENE DANS L'ACIDE ACETIQUE SUR ELECTRODE DE GRAPHITE PAR LE COBALT (III) CONDUIT SUCCESSIVEMENT A L'ACETATE PUIS A L'ACIDE. L'OXYDATION CHIMIQUE DU P-METHOXYTOLUENE ET DU TOLUENE PAR L'OXYGENE MOLECULAIRE, CATALYSEE PAR L'ACETATE DE COBALT, A ENSUITE ETE ETUDIEE. ON MONTRE QUE L'OXYDATION ELECTROCHIMIQUE IN SITU DU COBALT (II) EN COBALT (III) PERMET D'AMORCER LE PROCESSUS D'AUTOXYDATION SANS UTILISER DE GENERATEUR DE RADICAUX TEL QUE LE BROMURE DE SODIUM. PAR ASSISTANCE ELECTROCHIMIQUE, L'AUTOXYDATION D'ALKYLAROMATIQUES PEUT ETRE CONSIDERABLEMENT ACCELEREE. LES PARAMETRES TEMPERATURE, DEBIT D'OXYGENE ET COURANT ONT ETE ETUDIES DE MANIERE A OPTIMISER LA REACTION D'AUTOXYDATION ASSISTEE PAR ELECTROCHIMIE. L'ETAPE LIMITATIVE POUR L'AUTOXYDATION DU TOLUENE EST LA REACTION D'OXYDATION DE CELUI-CI PAR LE COBALT (III) ; CECI A CONDUIT A LA PROPOSITION D'UN MODELE CINETIQUE. PAR CONTRE, LA VITESSE D'OXYDATION DU P-METHOXYTOLUENE EST LIMITEE PAR LE TRANSFERT DE L'OXYGENE GAZEUX DANS LA PHASE LIQUIDE. DES MESURES PAR DES TECHNIQUES ELECTROCHIMIQUES ONT PERMIS DE REMONTER A LA SOLUBILITE ET AU CFFICIENT DE DIFFUSION DE L'OXYGENE DANS LE MILIEU UTILISE EN AUTOXYDATION

Download or read book Graphene written by Wonbong Choi and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the late 20th century, graphene-a one-atom-thick planar sheet of sp2-bonded carbon atoms densely packed in a honeycomb crystal lattice-has garnered appreciable attention as a potential next-generation electronic material due to its exceptional properties. These properties include high current density, ballistic transport, chemical inertness,

Download or read book ICREEC 2019 written by Ahmed Belasri and published by Springer Nature. This book was released on 2020-06-10 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights peer reviewed articles from the 1st International Conference on Renewable Energy and Energy Conversion, ICREEC 2019, held at Oran in Algeria. It presents recent advances, brings together researchers and professionals in the area and presents a platform to exchange ideas and establish opportunities for a sustainable future. Topics covered in this proceedings, but not limited to, are photovoltaic systems, bioenergy, laser and plasma technology, fluid and flow for energy, software for energy and impact of energy on the environment.

Download or read book N Heterocyclic Carbenes written by Silvia Diez-Gonzalez and published by Royal Society of Chemistry. This book was released on 2016-11-04 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: In less than 20 years N-heterocyclic carbenes (NHCs) have become well-established ancillary ligands for the preparation of transition metal-based catalysts. This is mainly due to the fact that NHCs tend to bind strongly to metal centres, avoiding the need of excess ligand in catalytic reactions. Also, NHC‒metal complexes are often insensitive to air and moisture, and have proven remarkably resistant to oxidation. This book showcases the wide variety of applications of NHCs in different chemistry fields beyond being simple phosphine mimics. This second edition has been updated throughout, and now includes a new chapter on NHC‒main group element complexes. It covers the synthesis of NHC ligands and their corresponding metal complexes, as well as their bonding and stereoelectronic properties and applications in catalysis. This is complemented by related topics such as organocatalysis and biologically active complexes. Written for organic and inorganic chemists, this book is ideal for postgraduates, researchers and industrialists.

Download or read book Phosphorus Compounds written by Maurizio Peruzzini and published by Springer Science & Business Media. This book was released on 2011-06-10 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each chapter of Phosphorus Compounds: Advanced Tools in Catalysis and Material Sciences have been carefully selected by the editors in order to represent a state-of-the-art overview of how phosphorus chemistry can provide solutions in various fields of applications. The editors have assembled an international array of world-renowned scientists and each chapter is written by experts in the fields of synthetic chemistry, homogeneous catalysis, dendrimers, theoretical calculations, materials science, and medicinal chemistry with a special focus on the chemistry of phosphorus compounds. Phosphorus Compounds: Advanced Tools in Catalysis and Material Sciences is of interest to a general readership ranging from advanced university course students to experts in academia and industry.

Download or read book Modern Styrenic Polymers written by John Scheirs and published by John Wiley & Sons. This book was released on 2003-03-28 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title addresses the latest developments in the field, covering the major advances that have occurred over the past five years in the polymerization and structure of new generation polystyrenes that are broadening its scope of application. It covers the advent of branched polystyrenes, syndiotactic polystyrene, high-molecular weight general purpose PS, styrenic interpolymers, and clear SBS copolymers Presents voluminous research previously only reported at conferences in one reference Unique coverage of a topic not found in the field

Download or read book Nanoscale Graphitic Carbon Nitride written by Alagarsamy Pandikumar and published by Elsevier. This book was released on 2021-09-09 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Graphitic Carbon Nitride focuses on multi-functional applications including energy conversion, storage and healthcare. Polymeric graphitic carbon nitride materials have attracted much attention in recent years because of their similarity to graphene. They are composed of carbon, nitrogen and some minor hydrogen content. In contrast to graphene, g-Graphitic carbon nitride is a medium band-gap semiconductor and in that role an effective photocatalyst and chemical catalyst for a broad variety of reactions and applications. This book covers the fundamentals and applications of graphitic carbon nitride (g-C3N4) in different sectors. It also covers the application of graphitic carbon nitride-based composites with metal, metal oxides, metal sulphide and carbon-based materials. This is an important resource for researchers in the fields of materials science, engineering, energy storage and chemical engineering who want to understand how nanoscale graphitic carbon nitride is being used for a range of industrial applications and processes. Outlines the major properties of nanoscale graphitic carbon nitride, along with their major application areas Assesses the challenges of manufacturing graphitic carbon nitride on a mass scale Explains major synthesis methods for nanoscale graphitic carbon nitride

Download or read book Light Water Hydrogen written by CRAIG GRIMES and published by Springer Science & Business Media. This book was released on 2007-12-03 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the field of solar production of hydrogen by water photo-splitting (photoelectrolysis) using semiconductor photoanodes. The emphasis of the discussion is on the use of nanotechnology in the field. The theories behind photocatalysis and photoelectrochemical processes responsible for hydrogen production are given in detail. This provides a state-of-the-art review of the semiconductor materials and methods used for improving the efficiency of the processes. The book also gives an account of the techniques used for making the nanostructures.

Download or read book Encyclopedia of American Business History written by Charles R. Geisst and published by Infobase Publishing. This book was released on 2014-05-14 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an alphabetically-arranged reference to the history of business and industry in the United States. Includes selected primary source documents.

Download or read book Applied Mineralogy in the Mining Industry written by W. Petruk and published by Elsevier. This book was released on 2000-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of performing applied mineralogy investigations, and applications and capabilities of recently developed instruments for measuring mineral properties are explored in this book intended for practicing applied mineralogists, students in mineralogy and metallurgy, and mineral processing engineers. The benefits of applied mineralogy are presented by using in-depth applied mineralogy studies on base metal ores, gold ores, porphyry copper ores, iron ores and industrial minerals as examples. The chapter on base metal ores includes a discussion on the effects of liberation, particle sizes and surfaces coatings of Pb, Cu, Fe, Ca and So4- on the recoveries of sphalerite, galena and chalcopyrite. The chapter on gold discusses various methods of determining the quantities of gold in different minerals, including 'invisible' gold in pyrite and arsenopyrite, so that a balance of the distribution of gold among the minerals can be calculated. This book also discusses the roles of pyrite, oxygen, moisture and bacterial (thiobacillus ferrooxidans) on reactions that produce acidic drainage from tailings piles, and summarizes currently used and proposed methods of remediation of acidic drainage.

Download or read book The Kyoto Protocol written by Sebastian Oberthür and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The adoption of the Kyoto Protocol in December 1997 was a major achievement in the endeavour to tackle the problem of global climate change at the dawn of the 21st century. After many years of involvement in the negotiation process, the book's two internationally recognised authors now offer the international community a first hand and inside perspective of the debate on the Kyoto Protocol. The book provides a comprehensive scholarly analysis of the history and content of the Protocol itself as well as of the economic, political and legal implications of its implementation. It also presents a perspective for the further development of the climate regime. These important features make this book an indispensable working tool for policy makers, negotiators, academics and all those actively involved and interested in climate change issues in both the developed and developing world.

Download or read book Nanotube Superfiber Materials written by Mark Schulz and published by William Andrew. This book was released on 2013-09-16 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotube Superfiber Materials refers to different forms of macroscale materials with unique properties constructed from carbon nanotubes. These materials include nanotube arrays, ribbons, scrolls, yarn, braid, and sheets. Nanotube materials are in the early stage of development and this is the first dedicated book on the subject. Transitioning from molecules to materials is a breakthrough that will positively impact almost all industries and areas of society. Key properties of superfiber materials are high flexibility and fatigue resistance, high energy absorption, high strength, good electrical conductivity, high maximum current density, reduced skin and proximity effects, high thermal conductivity, lightweight, good field emission, piezoresistive, magnetoresistive, thermoelectric, and other properties. These properties will open up the door to dozens of applications including replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others. The scope of the book covers three main areas: Part I: Processing; Part II: Properties; and Part III: Applications. Processing involves nanotube synthesis and macro scale material formation methods. Properties covers the mechanical, electrical, chemical and other properties of nanotubes and macroscale materials. Different approaches to growing high quality long nanotubes and spinning the nanotubes into yarn are explained in detail. The best ideas are collected from all around the world including commercial approaches. Applications of nanotube superfiber cover a huge field and provides a broad survey of uses. The book gives a broad overview starting from bioelectronics to carbon industrial machines. - First book to explore the production and applications of macro-scale materials made from nano-scale particles - Sets out the processes for producing macro-scale materials from carbon nanotubes, and describes the unique properties of these materials - Potential applications for CNT fiber/yarn include replacing copper wire for power conduction, EMI shielding, coax cable, carbon biofiber, bullet-proof vests, impact resistant glass, wearable antennas, biomedical microdevices, biosensors, self-sensing composites, supercapacitors, superinductors, hybrid superconductor, reinforced elastomers, nerve scaffolding, energy storage, and many others

Download or read book Encapsulations written by Alexandru Grumezescu and published by Academic Press. This book was released on 2016-05-27 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encapsulations, a volume in the Nanotechnology in the Agri-Food Industry series,presents key elements in establishing food quality through the improvement of food flavor and aroma. The major benefits of nanoencapsulation for food ingredients include improvement in bioavailability of flavor and aroma ingredients, improvement in solubility of poor water-soluble ingredients, higher ingredient retention during production process, higher activity levels of encapsulated ingredients, improved shelf life, and controlled release of flavor and aroma. This volume discusses main nanoencapsulation processes such as spray drying, melt injection, extrusion, coacervation, and emulsification. The materials used in nanoencapsulation include lipids, proteins, carbohydrates, cellulose, gums, and food grade polymers. Applications and benefits of nanoencapsulation such as controlled release, protections, and taste masking will be explained in detail. Includes the most up-to-date information on nanoencapsulation and nanocontainer-based delivery of antimicrobials Presents nanomaterials for innovation based on scientific advancements in the field Provides control release strategies to enhance bioactivity, including methods and techniques for research and innovation Provides useful tools to improve the delivery of bioactive molecules and living cells into foods

Download or read book Immobilized Catalysts written by Andreas Kirschning and published by Springer Science & Business Media. This book was released on 2004-11-22 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: R. Haag, S. Roller: Polymeric Supports for the Immobilisation of Catalysts .- J. Horn, F. Michalek, C.C. Tzschucke, W. Bannwarth: Non-Covalently Solid-Phase Bound Catalysts for Organic Synthesis .- Y. Uozumi: Recent Progress in Polymeric Palladium Catalysts for Organic Synthesis .- D.E. Bergbreiter, J. Li: Applications of Catalysts on Soluble Supports .- B. Desai, C.O. Kappe: Microwave-Assisted Synthesis Involving Immobilized Catalysts .- A. Kirschning, G. Jas: Applications of Immobilized Catalysts in Continuous Flow Processes .- N. End, K.-U. Schöning: Immobilized Catalysts in Industrial Research and Application .- N. End, K.-U. Schöning: Immobilized Biocatalysts in Industrial Research and Production

Download or read book Scientific Canadian Mechanics Magazine and Patent Office Record written by Canada. Patent Office and published by . This book was released on 1966-03 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Clinical Chronopharmacology written by Alain Reinberg and published by CRC Press. This book was released on 1990-07 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Periodical and predictable changes in biological susceptibility and response to a large variety of chemical agents, including drugs and food, have been documented since the early 1970s. This book provides a survey of clinically-documented research in chronopharmacology.

Download or read book Nano Semiconductors written by Krzysztof Iniewski and published by CRC Press. This book was released on 2018-09-03 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from top international experts from both industry and academia, Nano-Semiconductors: Devices and Technology is a must-read for anyone with a serious interest in future nanofabrication technologies. Taking into account the semiconductor industry’s transition from standard CMOS silicon to novel device structures—including carbon nanotubes (CNT), graphene, quantum dots, and III-V materials—this book addresses the state of the art in nano devices for electronics. It provides an all-encompassing, one-stop resource on the materials and device structures involved in the evolution from micro- to nanoelectronics. The book is divided into three parts that address: Semiconductor materials (i.e., carbon nanotubes, memristors, and spin organic devices) Silicon devices and technology (i.e., BiCMOS, SOI, various 3D integration and RAM technologies, and solar cells) Compound semiconductor devices and technology This reference explores the groundbreaking opportunities in emerging materials that will take system performance beyond the capabilities of traditional CMOS-based microelectronics. Contributors cover topics ranging from electrical propagation on CNT to GaN HEMTs technology and applications. Approaching the trillion-dollar nanotech industry from the perspective of real market needs and the repercussions of technological barriers, this resource provides vital information about elemental device architecture alternatives that will lead to massive strides in future development.