Download or read book Aluminum silicon Casting Alloys written by Malgorzata Warmuzek and published by ASM International. This book was released on 2004-01-01 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This atlas provides an in-depth understanding of the metallurgy and fracture behavior of aluminum-silicon casting alloys, which are used in a wide variety of automotive, aerospace, and consumer product applications. The atlas includes over 300 high-definition microfractographs of fracture profiles and fracture surfaces, accompanied with detailed descriptions and analysis of the fracture features and their significance in the selection, processing, properties, and performance of the alloy. The microfractographs are described and classified according to criteria described in detail in the introductory chapters in the book. The factors determining the fracture mechanism in these alloys, on the basis of their physical and mechanical properties and fracture mechanics, are described and analyzed. The set of micrographs in this atlas include several unique features: classification according to the alloy and its processing history, detailed analysis of selected microregions of the fracture surface, reference of the fracture features to the phase constituents of the alloy, and high resolution and high microscopic magnification of the SEM images. This book will be of great value to anyone involved in the selection, processing, application, testing, or evaluation of aluminum-silicon castings. The target audience includes metallurgists, foundry personnel, failure analysts, purchasers of castings, researchers in physical and mechanical metallurgy, students, and educators.
Download or read book Aluminum silicon Casting Alloys written by Małgorzata Warmuzek and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Atlas of Microstructures of Aluminium Casting Alloys written by Ettore Di Russo and published by . This book was released on 1993 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Elsevier. This book was released on 2010-07-07 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys summarizes research conducted at Moscow Institute of Steel and Alloy during many decades in part together with Alcoa Inc. The research covered areas of the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing. Emphasis on interconnection among phase equilibria, thermodynamics and microstructure of alloys Systematic overview of all phase diagrams with Al that are important for the development of casting aluminium alloys Diagrams ("processing windows") of important technological properties such as castability, molten metal fluidity, tendency to hot pre-solidification cracking, porosity Mathematical models for alloy mechanical properties facilitating the down-selection of best prospect candidates for new alloy development New principles of design of eutectic casting aluminium alloys Examples of successful novel casting alloy development, including alloys for high-strength applications, alloys with transition metals, and novel alloys utilizing aluminium scrap
Download or read book Performance of Aluminum Silicon Cast Alloys written by Adel Mohamed and published by LAP Lambert Academic Publishing. This book was released on 2010-12 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuing quest for aluminum castings with enhanced mechanical properties for applications in the automotive industries has intensified the interest in Al Si alloys. However, the commercial application of these materials depends on the control of the structure of the shape and distribution of the eutectic silicon particles in the matrix, as also by the intermetallics phases that occur upon solidification. Thus, the book was designed with the aim of understanding how alloying elements, trace elements, and heat treatment influence changes in the microstructure and, consequently, the performance of hypoeutectic and near-eutectic Al-Si alloys. Microstructural examination was carried out using optical microscopy, image analysis, and electron probe microanalysis (EPMA), wavelength dispersive spectroscopic (WDS) analysis facilities. By examining the mechanical properties of Al-Si alloys in conjunction with microstructure this book provides a valuable description of the development and behaviour of these materials
Download or read book The Treatment of Liquid Aluminum silicon Alloys written by John E. Gruzleski and published by . This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On the Residual Stresses and Microstructure Formation of Aluminum silicon Cast Alloys written by Seyed Mohsen Sadrossadat and published by . This book was released on 2011 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Al Si Alloys written by Francisco C. Robles Hernandez and published by Springer. This book was released on 2017-07-02 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details aluminum alloys with special focus on the aluminum silicon (Al‐Si) systems – that are the most abundant alloys second only to steel. The authors include a description of the manufacturing principles, thermodynamics, and other main characteristics of Al‐Si alloys. Principles of processing, testing, and in particular applications in the Automotive, Aeronautical and Aerospace fields are addressed.
Download or read book Relationship Between Fluidity and Microstructure of Aluminum Silicon Alloy written by and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluidity of casting alloys is defined as the ability of molten metal to fill mold cavity completely. In this research, fluidity of aluminum alloy grade AC2B, AC4CH, AC4B, AC9A, ADC12, and ADC14 was measured using reducing vacuum technique. Other parameters such as tube materials (copper, stainless steel, and quartz), tube diameters (from 2 mm to 6 mm), applied suction pressure (from 1.33 to 95 kPa), and degree of superheat (from 0 to 120 K) are investigated. Fluidity length of every alloy and condition varies linearly with the square root of suction pressure. Alloys with high silicon content exhibit higher fluidity. Effective suction pressure, defined as applied suction pressure minus gravity and surface energy terms, varies linearly with fluidity. Theoretical analysis indicates that the surface energy can be calculated from the experiments by fitting with curves which pass through the origin. Minimum applied suction pressure required to suck the liquid was calculated and is in the range from 40 to 200 Pa depending on the type of alloys. Microstructure of solidified specimen in the tubes was observed and agrees with the fine channel flow mechanism proposed earlier by Flemings.
Download or read book The Effect of Composition and Microstructure on the Machinability of Aluminium silicon Casting Alloys written by Mark B. Jocumsen and published by . This book was released on 1995 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On the Microstructure Formation and Mechanical Properties of Aluminium silicon Cast Alloys written by Salem Seifeddine and published by . This book was released on 2005 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Quantitative Characterization of Hypoeutectic Aluminum Silicon Copper As Cast Alloy Microstructures written by E. Kazakova and published by . This book was released on 2016 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are only two kinds of qualitative methods for the estimation of aluminum alloy structures: (1) bar charts (degree of eutectic fineness, porosity content, etc.), and (2) atlases of microstructures, mainly for rejection (overheating, for example). In this paper, the development of quantitative methods for the characterization of hypoeutectic Al-Si-Cu as-cast alloy microstructures using panoramic image analysis is described. As-cast and solution-annealed Al-6Si-2Cu alloy microstructures were studied. Parameters for monitoring the quality of the structure of this alloy were proposed. New algorithms for automatic estimation of eutectic fineness and its volume fraction were developed. Correlations among different microstructural parameters were found and interpreted using thermodynamic simulation. The grade of porosity according to GOST 1583-93 versus pore volume fraction, calculated by ASTM E1245, was defined. Bar charts for estimation of the average length of eutectic silicon particles were proposed. The eutectic modification grade, according to the American Foundry Society chart for microstructure control of hypoeutectic alloys, versus both the length and the elongation of eutectic silicon particles was determined. The relationships between alloy hardness and tensile elongation versus the proposed microstructural parameters for Al-6Si-2Cu alloy were defined. These relationships describe various grades of hypoeutectic Al-Si-Cu alloys in both the as-cast and as-solution-annealed conditions.
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Butterworth-Heinemann. This book was released on 2018-09-03 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys, Second Edition, the follow up to the fall 2007 work on the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing, discusses findings from the past decade, including sections on new casting alloys, novel casting technologies, and new methods of alloys design. The book also includes other hot topics, such as the implementation of computational technologies for the calculation of phase equilibria and thermodynamic properties of alloys, the development of software for calculation of diffusion processes in aluminum alloys, computational modeling of solidification microstructure and texture evolution of multi-component aluminum materials. In addition to changes in computational predictive abilities, there is a review of novel casting aluminum alloy compositions and properties, as well as descriptions of new casting technologies and updates to coverage on the mechanical properties of aluminum casting alloys. Presents a discussion of thermodynamic calculations used for assessing non-equilibrium solidifications of casting aluminum alloys Expands coverage of mathematical models for alloy mechanical properties, helping facilitate the selection of the best prospective candidate for new alloy development Contains a new section that describes the self-consistent evaluation of phase equilibria and thermodynamic properties of aluminum alloys
Download or read book The Effect of Stircasting on the Microstructure and Properties of Aluminium silicon Casting Alloys written by Helme bin Hashim and published by . This book was released on 1984 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructures and Properties of Aluminum Die Casting Alloys written by and published by . This book was released on 1998 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides descriptions of the microstructure of different aluminum die casting alloys and to relate the various microstructures to the alloy chemistry. It relates the microstructures of the alloys to their main engineering properties such as ultimate tensile strength, yield strength, elongation, fatigue life, impact resistance, wear resistance, hardness, thermal conductivity and electrical conductivity. Finally, it serves as a reference source for aluminum die casting alloys.
Download or read book Characteristics of Cast Aluminium silicon Alloys written by Salem Seifeddine and published by . This book was released on 2006 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microstructures and Thermal Analysis of Strontium treated Aluminum silicon Alloys written by Ned Tenekedjiev and published by . This book was released on 1995-01-01 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: