Download or read book Aluminum Alloys for Packaging III written by Subodh K. Das and published by . This book was released on 1998 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum Alloys for Packaging written by James G. Morris and published by Tms. This book was released on 1993-01-01 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an update on the current scientific status of canstock alloy technology. A special emphasis is placed on the alloy systems 3004, 5182, 5082, 1100 and 3003 used for beverage and food cans, closures, foils and laminates.
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examin
Download or read book Aluminum Alloys for Transportation Packaging Aerospace and Other Applications written by Subodh K. Das and published by Wiley-TMS. This book was released on 2007-05-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is the study of the physical and mechanicalmetallurgy of aluminum alloys produced by processing methods. Itaddresses progress in research, development, testing andapplication of aluminum sheet, plate, extrusions, forgings, andother products in end uses. Those applications includetransportation, such as automotive, aerospace and marine, packagingand other key areas. A collection of papers from the ahref="http://www.tms.org/Meetings/Annual-07/AnnMtg07Home.html"target="_blank"2007 TMS Annual Meeting & Exhibition/a heldin Orlando, Florida, February 25 -- March 1, 2007.
Download or read book Aluminum Alloys for Packaging written by J. G. Morris and published by . This book was released on 1993-01-01 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminum Alloys for Packaging Two written by James G. Morris and published by Tms. This book was released on 1996-01-01 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is the result of a continued interest in relating the basics of physical and mechanical metallurgy to the applied concerns of both the aluminium-producing and the packaging manufacturers. An update is provided of all aspects of can stock materials and the fundamentals of can making, including: the physical metallurgy of aluminium alloy package materials; a comparison of competitive materials; alloy processing, structure/property characterization; and package design/performance related to alloy metallurgy.
Download or read book Encyclopedia of Aluminum and Its Alloys Two Volume Set Print written by George E. Totten and published by CRC Press. This book was released on 2018-12-07 with total page 2957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This encyclopedia, written by authoritative experts under the guidance of an international panel of key researchers from academia, national laboratories, and industry, is a comprehensive reference covering all major aspects of metallurgical science and engineering of aluminum and its alloys. Topics covered include extractive metallurgy, powder metallurgy (including processing), physical metallurgy, production engineering, corrosion engineering, thermal processing (processes such as metalworking and welding, heat treatment, rolling, casting, hot and cold forming), surface engineering and structure such as crystallography and metallography.
Download or read book Aluminum Alloys for Packaging written by S. Das and published by Minerals, Metals, & Materials Society. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Held at the 1998 TMS Annual Meeting & Exhibition, this symposium covers aluminum can, lid, and tab stock alloys; coatings; and their related applications to can, lid, and tab making. Topics discussed include the physical and process metallurgy of aluminum packaging materials using direct-chill or continuous-casting processes, alloy processing, structure and property characterization, package design, technology, and performance.
Download or read book 13th International Conference on Aluminum Alloys ICAA 13 written by Hasso Weiland and published by Springer. This book was released on 2017-02-28 with total page 1857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a collection of papers presented at the 13th International Conference on Aluminum Alloys (ICAA-13), the premier global conference for exchanging emerging knowledge on the structure and properties of aluminum materials. The papers are organized around the topics of the science of aluminum alloy design for a range of market applications; the accurate prediction of material properties; novel aluminum products and processes; and emerging developments in recycling and applications using both monolithic and multi-material solutions.
Download or read book Hot Deformation and Processing of Aluminum Alloys written by Hugh J. McQueen and published by CRC Press. This book was released on 2011-09-28 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatise on the hot working of aluminum and its alloys, Hot Deformation and Processing of Aluminum Alloys details the possible microstructural developments that can occur with hot deformation of various alloys, as well as the kind of mechanical properties that can be anticipated. The authors take great care to explain and differentiate hot working in the context of other elevated temperature phenomena, such as creep, superplasticity, cold working, and annealing. They also pay particular attention to the fundamental mechanisms of aluminum plasticity at hot working temperatures. Using extensive analysis derived from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD), and orientation imaging microscopy (OIM), the authors examine those microstructures that evolve in torsion, compression, extrusion, and rolling. Further microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization, or gDRX), and continuous dynamic recrystallization involving both a single phase (cDRX/1-phase) and multiple phases (cDRX/2-phase). A companion to other works that focus on modeling, manufacturing involving plastic and superplastic deformation, and control of texture and phase transformations, this book provides thorough explanations of microstructural development to lay the foundation for further study of the mechanisms of thermomechanical processes and their application.
Download or read book National Bureau of Standards Miscellaneous Publication written by and published by . This book was released on 1945 with total page 1326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.
Download or read book Symposium Aluminum Alloys for Packaging written by and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NBS Special Publication written by and published by . This book was released on 1945 with total page 1328 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Package Engineering Third Edition written by Joseph F. Hanlon and published by CRC Press. This book was released on 1998-04-23 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, the Handbook of Package Engineering is still considered the standard industry reference on packaging materials and engineering. This text is a useful source of information for anyone involved in packaging. Designed as a refresher on packaging fundamentals, this complete guide also provides information on recent changes in the materials and structures of packaging. It reviews the essentials of production - packaging operations, line layout, and the machines that are required in order to perform basic packaging functions. It introduces the increasing web of laws and regulations controlling virtually all packaged products.
Download or read book Properties of Aluminum Alloys written by John Gilbert Kaufman and published by ASM International. This book was released on 2008-01-01 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of data collected and maintained for many years as the property of a large aluminum company, which decided in 1997 to make it available to other engineers and materials specialists. In tabular form, presents data on the tensile and creep properties of eight species of wrought alloys and five species of cast alloys in the various shapes used in applications. Then looks at the fatigue data for several alloys under a range of conditions and loads. The data represent the typical or average findings, and though some were developed years ago, the collection is the largest and most detailed available. There is no index.
Download or read book Precision Forging Technology and Equipment for Aluminum Alloy written by Lei Deng and published by Springer Nature. This book was released on 2022-04-18 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes the advanced precision forging technology of aluminum alloy parts as the main line, presents the content of precision forging process analysis, process parameter design, mold structure design, numerical simulation of forming process, and process test, combined with a large number of application examples classified according to the structural characteristics of parts. It introduces the theoretical basis of several new technologies and new equipment for precision forging, including the small flash precision forging technology, flow control forming technology, casting and forging combined forming technology, and new CNC precision forging hydraulic presses and servo hydraulic presses, which inspire readers to innovate on new technology and new equipment development.This book provides readers with the latest knowledge of aluminum alloy precision forging, which is of great reference value in the context of the current increasing attention to lightweight and the increasing application of aluminum alloy parts in automotive, aerospace, marine, and other fields. This book can be used as a reference book for engineering and technical personnel engaged in aluminum alloy forging technology and can also be used as a reference book for researchers, undergraduates, and graduate students interested in materials processing.
