Download or read book Integrated Electronics on Aluminum Nitride written by Reet Chaudhuri and published by Springer Nature. This book was released on 2022-12-06 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis outlines the principles, device physics, and technological applications of electronics based on the ultra-wide bandgap semiconductor aluminum nitride. It discusses the basic principles of electrostatics and transport properties of polarization-induced two-dimensional electron and hole channels in semiconductor heterostructures based on aluminum nitride. It explains the discovery of high-density two-dimensional hole gases in undoped heterojunctions, and shows how these high conductivity n- and p-type channels are used for high performance nFETs and pFETs, along with wide bandgap RF, mm-wave, and CMOS applications. The thesis goes on to discuss how the several material advantages of aluminum nitride, such as its high thermal conductivity and piezoelectric coefficient, enable not just high performance of transistors, but also monolithic integration of passive elements such as high frequency filters, enabling a new form factor for integrated RF electronics.
Download or read book Thermodynamic Properties of Aluminum Nitride written by Alla D. Mah and published by . This book was released on 1961 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Single Crystal Synthesis and Some Properties of Aluminum Nitride written by Cortland O. Dugger and published by . This book was released on 1975 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This final report, which covers the period from March 1972 to 30 June 1975, discusses some conditions for the synthesis of aluminum nitride (AIN) single crystals from solution. The solvent systems used are unique and novel. The average sized, water-white, bipyramidal AIN single crystals reproducibly grown from solution only were 1.1 mm long X 0.3 mm wide. The average sized, AIN single crystals grown from a combined solution-vapor reaction technique were 4mm long X 3 mm wide X 2mm thick. The in-house quantitative evaluation of the crystals was restricted to Laue patterns and emission spectrometry only. In Appendices A, B, C, and D, general discussions of solution growth, other AIN growth methods, some properties of AIN, and a very brief discussion of the newly emerging surface acoustic wave (SAW) device technology and why the use of AIN is considered a good electro-acoutic material in SAW devices are presented. (Author).
Download or read book Mechanical and Physical Properties of Particulate Composites in the System Titanium Nitride alumina aluminum Nitride written by K. J. Liles and published by . This book was released on 1989 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Coal tar and Ammonia Ammonia written by Georg Lunge and published by . This book was released on 1916 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Comprehensive Treatise on Inorganic and Theoretical Chemistry written by Joseph William Mellor and published by . This book was released on 1928 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technology of Cellulose Esters written by Edward Chauncey Worden and published by . This book was released on 1921 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nitride Ceramics written by Alexander A. Gromov and published by John Wiley & Sons. This book was released on 2015-01-20 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of recent developments in the field of non-oxide ceramics with special emphasis placed on the combustion synthesis of group I-VI nitrides and oxynitrides. To ensure the widest possible perspective, the authors are experts in academia, industry, or government research, and each chapter discusses different synthetic methods and process parameters, as well as important material properties and applications. The result is invaluable reading for researchers and practitioners in the industry as well as those looking for an introduction to the field. It is equally of great interest to chemists and materials scientists as well as engineers working in the area of inorganic and solid-state chemistry, structural and functional materials, catalysis, metallurgy, and electrochemistry.
Download or read book Final Report written by Great Britain. Ministry of Munitions. Nitrogen Products Committee and published by . This book was released on 1919 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Iii nitride Devices And Nanoengineering written by Zhe Chuan Feng and published by World Scientific. This book was released on 2008-08-19 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devices, nanoscale science and technologies based on GaN and related materials, have achieved great developments in recent years. New GaN-based devices such as UV detectors, fast p-HEMT and microwave devices are developed far more superior than other semiconductor materials-based devices.Written by renowned experts, the review chapters in this book cover the most important topics and achievements in recent years, discuss progress made by different groups, and suggest future directions. Each chapter also describes the basis of theory and experiment.This book is an invaluable resource for device design and processing engineers, material growers and evaluators, postgraduates and scientists as well as newcomers in the GaN field./a
Download or read book The Chemical News and Journal of Industrial Science written by and published by . This book was released on 1919 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Journal of Industrial and Engineering Chemistry written by and published by . This book was released on 1913 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transactions of the American Electrochemical Society written by American Electrochemical Society and published by . This book was released on 1913 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.
Download or read book Grain Size Control written by T. Gladman and published by CRC Press. This book was released on 2020-11-25 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain Size Control provides an excellent account of the understanding of many matters concerning grains, grain structure, and grain growth in controlling the grain size of polycrystalline metals. It considers the application of the principles of grain growth.
Download or read book Collision Processes Of Ion Positron Electron And Photon Beams With Matter Proceedings Of Elaf 91 written by Ana Cecilia De Azevedo E Souza and published by World Scientific. This book was released on 1992-04-30 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings contain lectures and contributed papers presented at the Latin American School of Physics in Caxambu, Brazil. Topics are related to a review of collision processes, excitation and ionization of molecules, ion formation by electron impact, mass and energy spectroscopy in collision reactions, desorption induced by ion and electron beams, and principles and applications of synchrotron radiation. The major theme of the school was “Current methods in collision processes.”
Download or read book Progress in Nitrogen Ceramics written by F.L. Riley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first NATO Advanced Study Institute on Nitrogen Ceramics held in 1976 at Canterbury came at a particularly significant moment in the development of this subject. The five-year period, 1971-75, had been an especially fruitful one in very many respects for work in the areas of covalent materials in general, and of the nitrides in particular. The Institute was therefore able to cap ture fully the spirit of excitement and adventure engendered by the outputs of numerous national research programmes, as well as those of many smaller research groups, concerning ceramics potent ially suitable for applications in a high temperature engineering context. It reflected accurately the state of knowledge with respect to the basic science, the powder technology, and the prop erties of materials based on silicon nitride and associated syst ems. The Proceedings of the Institute thus provided a good record for workers already in the field, and a useful textbook for new comers to the subject of nitrogen ceramics. The Canterbury Advanced Study Institute had a valuable educ ational and social function in bringing together for two weeks a large proportion of those workers most closely involved at that time with the nitrogen ceramics. The atmosphere of this meeting, providing both intensive discussions and informal contacts, made a lasting impression on the participants, and inevitably the question was raised of whether, and when, a second Advanced Study Institute might be held on this subject.
