Download or read book Alternative Approaches to P type Doping of GaN written by and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem being addressed: p-type doping of GaN. Conventional (column II) acceptors produce low hole concentrations. High hole concentrations are needed for low resistivity p-type material and p-type ohmic contacts.

Download or read book Alternative Approaches to P type Doping in GaN and Related Alloys CD ROM written by and published by . This book was released on 2005 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: ELECTRONIC FILE CHARACTERISTICS: 12 files; Adobe Acrobat (.PDF) and Microsoft Word (.DOC). PHYSICAL DESCRIPTION: 1 CD-ROM; 4 3/4 in.; 9.98 MB. ABSTRACT: This grant was issued under the Department of Defense Experimental Program to Stimulate Competitive Research as part of a national effort to develop nationally competitive programs in states that have historically not been successful at obtaining Federal Funding for independent research. In addition, the grant provided funding to both conduct research and to educate scientists and engineers in topics important to national defense. The grant was successful in all three areas. As detailed in this report, we have performed high quality research on fundamental issues of growth and doping in GaN, a strategic material, in addition to training a significant number of students. Finally, several nationally competitive programs were established as a direct result of capabilities developed on this grant. This report describes the research performed on the grant. Much of the research is described in detail in the publications and Ph. D Dissertations appended as part of this document. Thus, the information contained herein will only be summarized in the report. The areas covered in this report can be grouped as follows: 1) Growth Kinetics and Be-doping of GaN. 2) Development of new characterization for GaN and InN. 3) Growth of SiC layers.

Download or read book Advances In Semiconductor Lasers And Applications To Optoelectronics Ijhses Vol 9 No 4 written by Mitra Dutta and published by World Scientific. This book was released on 2000-06-21 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foreword by Charles H Townes This volume includes highlights of the theories underlying the essential phenomena occurring in novel semiconductor lasers as well as the principles of operation of selected heterostructure lasers. To understand scattering processes in heterostructure lasers and related optoelectronic devices, it is essential to consider the role of dimensional confinement of charge carriers as well as acoustical and optical phonons in quantum structures. Indeed, it is important to consider the confinement of both phonons and carriers in the design and modeling of novel semiconductor lasers such as the tunnel injection laser, quantum well intersubband lasers, and quantum dot lasers. The full exploitation of dimensional confinement leads to the exciting new capability of scattering time engineering in novel semiconductor lasers.As a result of continuing advances in techniques for growing quantum heterostructures, recent developments are likely to be followed in coming years by many more advances in semiconductor lasers and optoelectronics. As our understanding of these devices and the ability to fabricate them grow, so does our need for more sophisticated theories and simulation methods bridging the gap between quantum and classical transport.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book GaN and Related Materials written by Stephen J. Pearton and published by CRC Press. This book was released on 1997-10-29 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents views on current developments in heat and mass transfer research related to the modern development of heat exchangers. Devotes special attention to the different modes of heat and mass transfer mechanisms in relation to the new development of heat exchangers design. Dedicates particular attention to the future needs and demands for further development in heat and mass transfer. GaN and related materials are attracting tremendous interest for their applications to high-density optical data storage, blue/green diode lasers and LEDs, high-temperature electronics for high-power microwave applications, electronics for aerospace and automobiles, and stable passivation films for semiconductors. In addition, there is great scientific interest in the nitrides, because they appear to form the first semiconductor system in which extended defects do not severely affect the optical properties of devices. This series provides a forum for the latest research in this rapidly-changing field, offering readers a basic understanding of new developments in recent research. Series volumes feature a balance between original theoretical and experimental research in basic physics, device physics, novel materials and quantum structures, processing, and systems.

Download or read book Gallium Nitride enabled High Frequency and High Efficiency Power Conversion written by Gaudenzio Meneghesso and published by Springer. This book was released on 2018-05-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates to readers why Gallium Nitride (GaN) transistors have a superior performance as compared to the already mature Silicon technology. The new GaN-based transistors here described enable both high frequency and high efficiency power conversion, leading to smaller and more efficient power systems. Coverage includes i) GaN substrates and device physics; ii) innovative GaN -transistors structure (lateral and vertical); iii) reliability and robustness of GaN-power transistors; iv) impact of parasitic on GaN based power conversion, v) new power converter architectures and vi) GaN in switched mode power conversion. Provides single-source reference to Gallium Nitride (GaN)-based technologies, from the material level to circuit level, both for power conversions architectures and switched mode power amplifiers; Demonstrates how GaN is a superior technology for switching devices, enabling both high frequency, high efficiency and lower cost power conversion; Enables design of smaller, cheaper and more efficient power supplies.

Download or read book Selective Area P type Doping in Gallium Nitride Using Ion Implantation for High Power Applications written by Yekan Wang and published by . This book was released on 2022 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium ion implantation and subsequent activation annealing shows promise as an effective p-type doping method in Gallium Nitride (GaN). This dissertation relates implant-induced defects and the electrical performance. The implantation process introduces an elastic strain purely orthogonal to the (0001). Complete strain recovery is achieved by annealing at 1300 °C for 10 min (one GPa N2 overpressure) for dose level up to 1 1015 cm-2. However, extended defects such as stacking faults, dislocation loops, and inversion domains form during the anneal. Critical extended defects in the form of inversion domains were found to contain electrically inactive Mg after annealing at temperatures of 1300 °C (one GPa N2 overpressure), which results in a low dopant activation efficiency. A key finding of this work was to demonstrate that annealing at temperatures above 1300 °C eliminates the presence of the Mg-rich inversion domains. While other residual defects, such as dislocation loops, still exist after annealing at and above 1400 °C, chemical analysis shows no sign of Mg segregation at dislocation loops or other defects. Meanwhile, an overall decreasing trend in the dislocation loop size and density is observed after annealing at the higher temperatures and longer times. Electrical measurements show that annealing at 1400 °C leads to a dopant activation efficiency that is an order of magnitude higher than that observed at 1300 °C, which points to the benefits, in terms of defect density and p-type dopant activation, of using higher temperatures (e"1400 °C) annealing cycles to activate Mg acceptors. Novel characterization methods combining high resolution x-ray scattering and transmission electron microscopy were developed to understand the implant-induced strain recovery process and the evolution of extended defect structures after the dopant activation anneal. It was found that homoepitaxial GaN on high quality native substrates is necessary for clearly assessing the implant-induced defects by separating them from the pre-existing intrinsic defects. Results from this work are expected to bring the understanding of the key processing steps to achieve high activation efficiency selective area p-type doping for vertical GaN device structures in a scalable framework

Download or read book Rare Earth and Transition Metal Doping of Semiconductor Materials written by Volkmar Dierolf and published by Woodhead Publishing. This book was released on 2016-01-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare Earth and Transition Metal Doping of Semiconductor Material explores traditional semiconductor devices that are based on control of the electron's electric charge. This book looks at the semiconductor materials used for spintronics applications, in particular focusing on wide band-gap semiconductors doped with transition metals and rare earths. These materials are of particular commercial interest because their spin can be controlled at room temperature, a clear opposition to the most previous research on Gallium Arsenide, which allowed for control of spins at supercold temperatures. Part One of the book explains the theory of magnetism in semiconductors, while Part Two covers the growth of semiconductors for spintronics. Finally, Part Three looks at the characterization and properties of semiconductors for spintronics, with Part Four exploring the devices and the future direction of spintronics. - Examines materials which are of commercial interest for producing smaller, faster, and more power-efficient computers and other devices - Analyzes the theory behind magnetism in semiconductors and the growth of semiconductors for spintronics - Details the properties of semiconductors for spintronics

Download or read book Springer Handbook of Semiconductor Devices written by Massimo Rudan and published by Springer Nature. This book was released on 2022-11-10 with total page 1680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Springer Handbook comprehensively covers the topic of semiconductor devices, embracing all aspects from theoretical background to fabrication, modeling, and applications. Nearly 100 leading scientists from industry and academia were selected to write the handbook's chapters, which were conceived for professionals and practitioners, material scientists, physicists and electrical engineers working at universities, industrial R&D, and manufacturers. Starting from the description of the relevant technological aspects and fabrication steps, the handbook proceeds with a section fully devoted to the main conventional semiconductor devices like, e.g., bipolar transistors and MOS capacitors and transistors, used in the production of the standard integrated circuits, and the corresponding physical models. In the subsequent chapters, the scaling issues of the semiconductor-device technology are addressed, followed by the description of novel concept-based semiconductor devices. The last section illustrates the numerical simulation methods ranging from the fabrication processes to the device performances. Each chapter is self-contained, and refers to related topics treated in other chapters when necessary, so that the reader interested in a specific subject can easily identify a personal reading path through the vast contents of the handbook.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Ultra wide Bandgap Semiconductor Materials written by Meiyong Liao and published by Elsevier. This book was released on 2019-06-18 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-wide Bandgap Semiconductors (UWBG) covers the most recent progress in UWBG materials, including sections on high-Al-content AlGaN, diamond, B-Ga2O3, and boron nitrides. The coverage of these materials is comprehensive, addressing materials growth, physics properties, doping, device design, fabrication and performance. The most relevant and important applications are covered, including power electronics, RF electronics and DUV optoelectronics. There is also a chapter on novel structures based on UWBG, such as the heterojunctions, the low-dimensional structures, and their devices. This book is ideal for materials scientists and engineers in academia and R&D searching for materials superior to silicon carbide and gallium nitride. - Provides a one-stop resource on the most promising ultra-wide bandgap semiconducting materials, including high-Al-content AlGaN, diamond, ß-Ga2O3, boron nitrides, and low-dimensional materials - Presents comprehensive coverage, from materials growth and properties, to device design, fabrication and performance - Features the most relevant applications, including power electronics, RF electronics and DUV optoelectronics

Download or read book Handbook of Crystal Growth written by Peter Rudolph and published by Elsevier. This book was released on 2014-11-04 with total page 1420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vol 2A: Basic TechnologiesHandbook of Crystal Growth, Second Edition Volume IIA (Basic Technologies) presents basic growth technologies and modern crystal cutting methods. Particularly, the methodical fundamentals and development of technology in the field of bulk crystallization on both industrial and research scales are explored. After an introductory chapter on the formation of minerals, ruling historically the basic crystal formation parameters, advanced basic technologies from melt, solution, and vapour being applied for research and production of the today most important materials, like silicon, semiconductor compounds and oxides are presented in detail. The interdisciplinary and general importance of crystal growth for human live are illustrated.Vol 2B: Growth Mechanisms and DynamicsHandbook of Crystal Growth, Second Edition Volume IIB (Growth Mechanisms and Dynamics) deals with characteristic mechanisms and dynamics accompanying each bulk crystal growth method discussed in Volume IIA. Before the atoms or molecules pass over from a position in the fluid medium (gas, melt or solution) to their place in the crystalline face they must be transported in the fluid over macroscopic distances by diffusion, buoyancy-driven convection, surface-tension-driven convection, and forced convection (rotation, acceleration, vibration, magnetic mixing). Further, the heat of fusion and the part carried by the species on their way to the crystal by conductive and convective transport must be dissipated in the solid phase by well-organized thermal conduction and radiation to maintain a stable propagating interface. Additionally, segregation and capillary phenomena play a decisional role for chemical composition and crystal shaping, respectively. Today, the increase of high-quality crystal yield, its size enlargement and reproducibility are imperative conditions to match the strong economy.Volume 2A - Presents the status and future of Czochralski and float zone growth of dislocation-free silicon - Examines directional solidification of silicon ingots for photovoltaics, vertical gradient freeze of GaAs, CdTe for HF electronics and IR imaging as well as antiferromagnetic compounds and super alloys for turbine blades - Focuses on growth of dielectric and conducting oxide crystals for lasers and non-linear optics - Topics on hydrothermal, flux and vapour phase growth of III-nitrides, silicon carbide and diamond are explored Volume 2B - Explores capillarity control of the crystal shape at the growth from the melt - Highlights modeling of heat and mass transport dynamics - Discusses control of convective melt processes by magnetic fields and vibration measures - Includes imperative information on the segregation phenomenon and validation of compositional homogeneity - Examines crystal defect generation mechanisms and their controllability - Illustrates proper automation modes for ensuring constant crystal growth process - Exhibits fundamentals of solution growth, gel growth of protein crystals, growth of superconductor materials and mass crystallization for food and pharmaceutical industries

Download or read book Principles of Solar Cells LEDs and Related Devices written by Adrian Kitai and published by John Wiley & Sons. This book was released on 2018-08-15 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the text that offers an introduction to the principles of solar cells and LEDs, revised and updated The revised and updated second edition of Principles of Solar Cells, LEDs and Related Devices offers an introduction to the physical concepts required for a comprehensive understanding of p-n junction devices, light emitting diodes and solar cells. The author – a noted expert in the field – presents information on the semiconductor and junction device fundamentals and extends it to the practical implementation of semiconductors in both photovoltaic and LED devices. In addition, the text offers information on the treatment of a range of important semiconductor materials and device structures including OLED devices and organic solar cells. This second edition contains a new chapter on the quantum mechanical description of the electron that will make the book accessible to students in any engineering discipline. The text also includes a new chapter on bipolar junction and junction field effect transistors as well as expanded chapters on solar cells and LEDs that include more detailed information on high efficiency devices. This important text: Offers an introduction to solar cells and LEDs, the two most important applications of semiconductor diodes Provides a solid theoretical basis for p-n junction devices Contains updated information and new chapters including better coverage of LED out-coupling design and performance and improvements in OLED efficiency Presents student problems at the end of each chapter and worked example problems throughout the text Written for students in electrical engineering, physics and materials science and researchers in the electronics industry, Principles of Solar Cells, LEDs and Related Devices is the updated second edition that offers a guide to the physical concepts of p-n junction devices, light emitting diodes and solar cells.

Download or read book Materials for High Temperature Semiconductor Devices written by National Research Council and published by National Academies Press. This book was released on 1995-09-14 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major benefits to system architecture would result if cooling systems for components could be eliminated without compromising performance. This book surveys the state-of-the-art for the three major wide bandgap materials (silicon carbide, nitrides, and diamond), assesses the national and international efforts to develop these materials, identifies the technical barriers to their development and manufacture, determines the criteria for successfully packaging and integrating these devices into existing systems, and recommends future research priorities.

Download or read book Handbook of Thin Films written by Hari Singh Nalwa and published by Elsevier. This book was released on 2001-11-17 with total page 3436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This five-volume handbook focuses on processing techniques, characterization methods, and physical properties of thin films (thin layers of insulating, conducting, or semiconductor material). The editor has composed five separate, thematic volumes on thin films of metals, semimetals, glasses, ceramics, alloys, organics, diamonds, graphites, porous materials, noncrystalline solids, supramolecules, polymers, copolymers, biopolymers, composites, blends, activated carbons, intermetallics, chalcogenides, dyes, pigments, nanostructured materials, biomaterials, inorganic/polymer composites, organoceramics, metallocenes, disordered systems, liquid crystals, quasicrystals, and layered structures.Thin films is a field of the utmost importance in today's materials science, electrical engineering and applied solid state physics; with both research and industrial applications in microelectronics, computer manufacturing, and physical devices.Advanced, high-performance computers, high-definition TV, digital camcorders, sensitive broadband imaging systems, flat-panel displays, robotic systems, and medical electronics and diagnostics are but a few examples of miniaturized device technologies that depend the utilization of thin film materials. The Handbook of Thin Films Materials is a comprehensive reference focusing on processing techniques, characterization methods, and physical properties of these thin film materials.

Download or read book Vertical Gallium Nitride PowerDevices Fabrication and Characterisation written by Rico Hentschel and published by BoD – Books on Demand. This book was released on 2021-01-03 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Efficient power conversion is essential to face the continuously increasing energy consumption of our society. GaN based vertical power field effect transistors provide excellent performance figures for power-conversion switches, due to their capability of handling high voltages and current densities with very low area consumption. This work focuses on a vertical trench gate metal oxide semiconductor field effect transistor (MOSFET) with conceptional advantages in a device fabrication preceded GaN epitaxy and enhancement mode characteristics. The functional layer stack comprises from the bottom an n+/n--drift/p-body/n+-source GaN layer sequence. Special attention is paid to the Mg doping of the p-GaN body layer, which is a complex topic by itself. Hydrogen passivation of magnesium plays an essential role, since only the active (hydrogen-free) Mg concentration determines the threshold voltage of the MOSFET and the blocking capability of the body diode. Fabrication specific challenges of the concept are related to the complex integration, formation of ohmic contacts to the functional layers, the specific implementation and processing scheme of the gate trench module and the lateral edge termination. The maximum electric field, which was achieved in the pn- junction of the body diode of the MOSFET is estimated to be around 2.1 MV/cm. From double-sweep transfer measurements with relatively small hysteresis, steep subthreshold slope and a threshold voltage of 3 - 4 V a reasonably good Al2O3/GaN interface quality is indicated. In the conductive state a channel mobility of around 80 - 100 cm2/Vs is estimated. This value is comparable to device with additional overgrowth of the channel. Further enhancement of the OFF-state and ON-state characteristics is expected for optimization of the device termination and the high-k/GaN interface of the vertical trench gate, respectively. From the obtained results and dependencies key figures of an area efficient and competitive device design with thick drift layer is extrapolated. Finally, an outlook is given and advancement possibilities as well as technological limits are discussed.

Download or read book State of the Art Program on Compound Semiconductors 50 SOTAPOCS 50 and Processes at the Semiconductor Solution Interface 3 written by A. G. Baca and published by The Electrochemical Society. This book was released on 2009-05 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of ECS Transactions contain the most recent developments in compound semiconductors encompassing advanced devices, materials growth, characterization, processing, device fabrication, reliability, and other related topics, as well as the most recent developments in processes at the semiconductor/solution interface including etching, oxidation, passivation, film growth, electrochemical and photoelectrochemical processes, electroluminescence, photoluminescence, and other related topics.