Download or read book Light Metals 2014 written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2014 collection includes papers from the following symposia: •Alumina and Bauxite •Aluminum Alloys: Fabrication, Characterization and Applications •Aluminum Processing •Aluminum Reduction Technology •Cast Shop for Aluminum Production •Electrode Technology for Aluminum Production •Light-metal Matrix (Nano)-composites
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-04-25 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference provides thorough and in-depth coverage of the latest production and processing technologies encountered in the aluminum alloy industry, discussing current analytical methods for aluminum alloy characterization as well as extractive metallurgy, smelting, master alloy formation, and recycling. The Handbook of Aluminum: Volume 2 examin
Download or read book Physical Metallurgy of Direct Chill Casting of Aluminum Alloys written by Dmitry G. Eskin and published by CRC Press. This book was released on 2008-04-17 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulling together information previously scattered throughout numerous research articles into one detailed resource, this book connects the fundamentals of structure formation during solidification with the practically observed structure and defect patterns in billets and ingots. The author examines the formation of a structure, properties, and defects in the as-cast material in tight correlation to the physical phenomena involved in the solidification and the process parameters. Compiling recent results and data, the book discusses the fundamentals of solidification together with metallurgical and technological aspects of DC casting. It gives new insight and perspective into DC casting research.
Download or read book Aluminium Cast House Technology XI written by John A. Taylor and published by Trans Tech Publications Ltd. This book was released on 2009-10-08 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Aluminium Cast-house Technology Conference in Australia is truly an international event where leaders in the aluminium industries of the five developed continents meet every two years. The participants have the opportunity to listen to acknowledged experts in the field and to learn of the latest developments in aluminium processing technology. It is important, especially during the current worldwide financial crisis, to learn what means are available for reducing costs and to learn how others have adjusted to the present situation.
Download or read book THERMEC 2009 written by T. Chandra and published by Trans Tech Publications Ltd. This book was released on 2010-01-12 with total page 4100 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are the proceedings of the 6th International Conference on Processing and Manufacturing of Advanced Materials THERMEC2009; held during the period, August 25-29, 2006, in Berlin , Germany under the co-sponsorship of The Minerals, Metals & Materials Society (TMS) ,USA. This work reflects the current ensemble knowledge of world-wide researchers and engineers/technologists working on various aspects of the processing, fabrication, structure/property evaluation and applications of both ferrous and non-ferrous materials; including biomaterials and smart/intelligent materials.
Download or read book Material Forming written by Lukasz Madej and published by Materials Research Forum LLC. This book was released on 2023-04-25 with total page 2163 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings present papers on Additive Manufacturing, Composites Forming Processes, Extrusion and Drawing, Forging and Rolling, Formability of Metallic Materials, Friction and Wear in Metal Forming, Incremental and Sheet Metal Forming, Innovative Joining by Forming Technologies, Lionel Fourment MS on Optimization and Inverse Analysis in Forming, Machining and Cutting, Material Behavior Modelling, New and Advanced Numerical Strategies for Material Forming, Non-Conventional Processes, Polymer Processing and Thermomechanical Properties, Sustainability on Material Forming, and Property-Controlled Forming.
Download or read book Aluminium 2000 written by and published by . This book was released on 1993 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 1st World Congress on Integrated Computational Materials Engineering ICME written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-06-15 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its most advanced form, Integrated Computational Materials Engineering (ICME) holistically integrates manufacturing simulation, advanced materials models and component performance analysis. This volume contains thirty-five papers presented at the 1st World Congress on Integrated Computational Materials Engineering. Modeling processing-microstructure relationships, modeling microstructure-property relationships, and the role of ICME in graduate and undergraduate education are discussed. Ideal as a primary text for engineering students, this book motivates a wider understanding of the advantages and limitations offered by the various computational (and coordinated experimental) tools of this field.
Download or read book Essential Readings in Light Metals Cast Shop for Aluminum Production written by John Grandfield and published by John Wiley & Sons. This book was released on 2013-04-03 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Original research findings and reviews spanning all aspectsof the science and technology of casting Since 1971, The Minerals, Metals & Materials Society haspublished the Light Metals proceedings. Highlighting some ofthe most important findings and insights reported over the pastfour decades, this volume features the best original researchpapers and reviews on cast shop science and technology for aluminumproduction published in Light Metals from 1971 to 2011. Papers have been divided into ten subject sections for ease ofaccess. Each section has a brief introduction and a list ofrecommended articles for researchers interested in exploring eachsubject in greater depth. Only 12 percent of the cast shop science and technology papersever published in Light Metals were chosen for this volume.Selection was based on a rigorous review process. Among the papers,readers will find landmark original research findings and expertreviews summarizing current thinking on key topics at the time ofpublication. From basic research to industry standards to advancedapplications, the articles published in this volume collectivelyrepresent a complete overview of cast shop science and technology,supporting the work of students, researchers, and engineers aroundthe world.
Download or read book Essential Readings in Light Metals Volume 3 Cast Shop for Aluminum Production written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: ONE OF A FOUR-BOOK COLLECTION SPOTLIGHTING CLASSIC ARTICLES Original research findings and reviews spanning all aspects of the science and technology of casting Since 1971, The Minerals, Metals & Materials Society has published the Light Metals proceedings. Highlighting some of the most important findings and insights reported over the past four decades, this volume features the best original research papers and reviews on cast shop science and technology for aluminum production published in Light Metals from 1971 to 2011. Papers have been divided into ten subject sections for ease of access. Each section has a brief introduction and a list of recommended articles for researchers interested in exploring each subject in greater depth. Only 12 percent of the cast shop science and technology papers ever published in Light Metals were chosen for this volume. Selection was based on a rigorous review process. Among the papers, readers will find landmark original research findings and expert reviews summarizing current thinking on key topics at the time of publication. From basic research to industry standards to advanced applications, the articles published in this volume collectively represent a complete overview of cast shop science and technology, supporting the work of students, researchers, and engineers around the world.
Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels
Download or read book Alstruc written by Anne Lise Dons and published by . This book was released on 2002 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Deformation of Aluminum Alloys III written by Zhe Jin and published by TMS Publishing Company. This book was released on 2003 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the proceedings of the third symposium on Hot Deformation in Aluminum Alloys, held in San Diego, CA, March 3-6, 2003."--p. xi.
Download or read book Modeling for Casting and Solidification Processing written by Kuang-Oscar Yu and published by CRC Press. This book was released on 2001-10-16 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text seeks to provide a comprehensive technical foundation and practical examples for casting process modelling technology. It highlights fundamental theory for solidification and useful applications for industrial production. It also details shape and ingot castings, semi-solid metalworking, and spray forming.
Download or read book Aluminium Alloys 2006 written by Warren J. Poole and published by . This book was released on 2006 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world production of primary and recycled aluminum continues to increase and, over the past twenty years, has risen from ~15 Mt/y in 1985 to ~32 Mt/y in 2005. The main consumers are transportation, beverage and other packaging, and building construction. The global primary aluminum production has been growing by about 2-3% per year. However, growth rates over the last decade have been much higher. In particular, during the past five years, China has played a critical role in aluminum production and has gone through a dramatic period of growth.
Download or read book Solidification written by Jonathan A. Dantzig and published by EPFL Press. This book was released on 2016-11-18 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solidification is one of the oldest processes for producing complex shapes for applications ranging from art to industry, and remains as one of the most important commercial processes for many materials. Since the 1980s, numerous fundamental developments in the understanding of solidification processes and microstructure formation have come from both analytical theories and the application of computational techniques using commonly available powerful computers. This book integrates these developments in a comprehensive volume that also presents and places them in the context of more classical theories. This second edition highlights the key concepts within each chapter to help guide the reader through the most important aspects of the topics. The figures are now in color, in order to improve the visualization of phenomena and concepts. Recent important developments in the field since the first edition was published have also been added. The three-part text is aimed at graduate and professional engineers. The first part, Fundamentals and Macroscale Phenomena, presents the thermodynamics of solutions and then builds on that subject to motivate and describe equilibrium phase diagrams. Transport phenomena are discussed next, focusing on the issues of most importance to liquid-solid phase transformations, then moving on to describing in detail both analytical and numerical approaches to solving such problems. The second part, Microstructure, employs these fundamental concepts for the treatment of nucleation, dendritic growth, microsegregation, eutectic and peritectic solidification, and microstructure competition. This part concludes with a chapter describing the coupling of macro- and microscopic phenomena in microstructure development. The third and final part describes various types of Defects that may occur, with emphasis on porosity, hot tearing and macrosegregation, presented using the modeling tools and microstructure descriptions developed earlier.
