Download or read book Alpha Beta and Gamma Ray Spectroscopy written by K. Siegbahn and published by Elsevier. This book was released on 2012-12-02 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alpha-, Beta- and Gamma-Ray Spectroscopy Volume 1 offers a comprehensive account of radioactivity and related low-energy phenomena. It summarizes progress in the field of alpha-, beta- and gamma-ray spectroscopy, including the discovery of the non-conservation of parity, as well as new experimental methods that elucidate the processes of weak interactions in general and beta-decay in particular. Comprised of 14 chapters, the book presents experimental methods and theoretical discussions and calculations to maintain the link between experiment and theory. It begins with a discussion of the interaction of electrons and alpha particles with matter. The book explains the elastic scattering of electrons by atomic nuclei and the interaction between gamma-radiation and matter. It then introduces topic on beta-ray spectrometer theory and design and crystal diffraction spectroscopy of nuclear gamma rays. Moreover, the book discusses the applications of the scintillation counter; proportional counting in gases; and the general processes and procedures used in determining disintegration schemes through a study of the beta- and gamma-rays emitted. In addition, it covers the nuclear shell model; collective nuclear motion and the unified model; and alpha-decay conservation laws. The emissions of gamma-radiation during charged particle bombardment and from fission fragments, as well as the neutron-capture radiation spectroscopy, are also explained. Experimentalists will find this book extremely useful.
Download or read book Handbook of Radioactivity Analysis written by Michael F. L'Annunziata and published by Elsevier. This book was released on 2012-12-02 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Radioactivity Analysis is written by experts in the measurement of radioactivity. The book describes the broad scope of analytical methods available and instructs the reader on how to select the proper technique. It is intended as a practical manual for research which requires the accurate measurement of radioactivity at all levels, from the low levels encountered in the environment to the high levels measured in radioisotope research. This book contains sample preparation procedures, recommendations on steps to follow, necessary calculations, computer controlled analysis, and high sample throughput techniques. Each chapter includes practical techniques for application to nuclear safety, nuclear safeguards, environmental analysis, weapons disarmament, and assays required for research in biomedicine and agriculture. The fundamentals of radioactivity properties, radionuclide decay, and methods of detection are included to provide the basis for a thorough understanding of the analytical procedures described in the book. Therefore, the Handbook can also be used as a teaching text. - Includes sample preparation techniques for matrices such as soil, air, plant, water, animal tissue, and surface swipes - Provides procedures and guidelines for the analysis of commonly encountered na
Download or read book Handbook of Radioactivity Analysis written by Michael F. L'Annunziata and published by Academic Press. This book was released on 2020-03-07 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Radioactivity Analysis: Radiation Physics and Detectors, Volume One, and Radioanalytical Applications, Volume Two, Fourth Edition, constitute an authoritative reference on the principles, practical techniques and procedures for the accurate measurement of radioactivity - everything from the very low levels encountered in the environment, to higher levels measured in radioisotope research, clinical laboratories, biological sciences, radionuclide standardization, nuclear medicine, nuclear power, and fuel cycle facilities, and in the implementation of nuclear forensic analysis and nuclear safeguards. It includes sample preparation techniques for all types of matrices found in the environment, including soil, water, air, plant matter and animal tissue, and surface swipes.Users will find the latest advances in the applications of radioactivity analysis across various fields, including environmental monitoring, radiochemical standardization, high-resolution beta imaging, automated radiochemical separation, nuclear forensics, and more. - Spans two volumes, Radiation Physics and Detectors and Radioanalytical Applications - Includes a new chapter on the analysis of environmental radionuclides - Provides the latest advances in the applications of liquid and solid scintillation analysis, alpha- and gamma spectrometry, mass spectrometric analysis, Cherenkov counting, flow-cell radionuclide analysis, radionuclide standardization, aerosol analysis, high-resolution beta imaging techniques, analytical techniques in nuclear forensics, and nuclear safeguards - Describes the timesaving techniques of computer-controlled automatic separation and activity analysis of radionuclides - Provides an extensive table of the radiation characteristics of most radionuclides of interest for the radioanalytical chemist
Download or read book Health Risks of Radon and Other Internally Deposited Alpha Emitters written by National Research Council and published by National Academies Press. This book was released on 1988-02-01 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes hazards from radon progeny and other alpha-emitters that humans may inhale or ingest from their environment. In their analysis, the authors summarize in one document clinical and epidemiological evidence, the results of animal studies, research on alpha-particle damage at the cellular level, metabolic pathways for internal alpha-emitters, dosimetry and microdosimetry of radionuclides deposited in specific tissues, and the chemical toxicity of some low-specific-activity alpha-emitters. Techniques for estimating the risks to humans posed by radon and other internally deposited alpha-emitters are offered, along with a discussion of formulas, models, methods, and the level of uncertainty inherent in the risk estimates.
Download or read book Remote Compositional Analysis written by Janice L. Bishop and published by Cambridge University Press. This book was released on 2019-11-28 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive overview of the spectroscopic, mineralogical, and geochemical techniques used in planetary remote sensing.
Download or read book Radiochemistry and Nuclear Chemistry written by Gregory Choppin and published by Butterworth-Heinemann. This book was released on 2002 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Origin of Nuclear Science; Nuclei, Isotopes and Isotope Separation; Nuclear Mass and Stability; Unstable Nuclei and Radioactive Decay; Radionuclides in Nature; Absorption of Nuclear Radiation; Radiation Effects on Matter; Detection and Measurement Techniques; Uses of Radioactive Tracers; Cosmic Radiation and Elementary Particles; Nuclear Structure; Energetics of Nuclear Reactions; Particle Accelerators; Mechanics and Models of Nuclear Reactions; Production of Radionuclides; The Transuranium Elements; Thermonuclear Reactions: the Beginning and the Future; Radiation Biology and Radiation Protection; Principles of Nuclear Power; Nuclear Power Reactors; Nuclear Fuel Cycle; Behavior of Radionuclides in the Environment; Appendices; Solvent Extraction Separations; Answers to Exercises; Isotope Chart; Periodic Table of the Elements; Quantities and Units; Fundamental Constants; Energy Conversion Factors; Element and Nuclide Index; Subject Index.
Download or read book Isotopes for Medicine and the Life Sciences written by Institute of Medicine and published by National Academies Press. This book was released on 1995-01-27 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radioactive isotopes and enriched stable isotopes are used widely in medicine, agriculture, industry, and science, where their application allows us to perform many tasks more accurately, more simply, less expensively, and more quickly than would otherwise be possible. Indeed, in many casesâ€"for example, biological tracersâ€"there is no alternative. In a stellar example of "technology transfer" that began before the term was popular, the Department of Energy (DOE) and its predecessors has supported the development and application of isotopes and their transfer to the private sector. The DOE is now at an important crossroads: Isotope production has suffered as support for DOE's laboratories has declined. In response to a DOE request, this book is an intensive examination of isotope production and availability, including the education and training of those who will be needed to sustain the flow of radioactive and stable materials from their sources to the laboratories and medical care facilities in which they are used. Chapters include an examination of enriched stable isotopes; reactor and accelerator-produced radionuclides; partnerships among industries, national laboratories, and universities; and national isotope policy.
Download or read book Advanced Mathematical Computational Tools in Metrology VI written by P. Ciarlini and published by World Scientific. This book was released on 2004 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects refereed contributions based on the presentations made at the Sixth Workshop on Advanced Mathematical and Computational Tools in Metrology, held at the Istituto di Metrologia “G. Colonnetti” (IMGC), Torino, Italy, in September 2003. It provides a forum for metrologists, mathematicians and software engineers that will encourage a more effective synthesis of skills, capabilities and resources, and promotes collaboration in the context of EU programmes, EUROMET and EA projects, and MRA requirements. It contains articles by an important, worldwide group of metrologists and mathematicians involved in measurement science and, together with the five previous volumes in this series, constitutes an authoritative source for the mathematical, statistical and software tools necessary to modern metrology.The proceedings have been selected for coverage in: Index to Scientific & Technical Proceedings® (ISTP® / ISI Proceedings)Index to Scientific & Technical Proceedings (ISTP CDROM version / ISI Proceedings)CC Proceedings — Engineering & Physical Science
Download or read book Separation Preconcentration and Spectrophotometry in Inorganic Analysis written by Z. Marczenko and published by Elsevier. This book was released on 2000-10-18 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectrophotometry enables one to determine, with good precision and sensitivity, almost all the elements present in small and trace quantities of any material. The method is particularly useful in the determination of non-metals and allows the determination elements in a large range of concentrations (from single % to low ppm levels) in various materials.In Separation, Preconcentration and Spectrophotometry in Inorganic Analysis, much attention has been paid to separation and preconcentration methods, since they play an essential role in increasing the selectivity and sensitivity of spectrophotometric methods. Separation and preconcentration methods have also been utilised in other determination techniques.Spectrophotometric methods which are widely used for the determination of the elements in a large variety of inorganic materials are presented in the book whilst separation and preconcentration procedures combined with spectrophotometry are also described. This book contains recent advances in spectrophotometry, detailed discussion of the instrumentation, and the techniques and reagents used for spectrophotometric determination of elements in a wide range of materials as well as a detailed discussion of separation and preconcentration procedures that precede the spectrophotometric detection.
Download or read book Techniques for Nuclear and Particle Physics Experiments written by William R. Leo and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: A treatment of the experimental techniques and instrumentation most often used in nuclear and particle physics experiments as well as in various other experiments, providing useful results and formulae, technical know-how and informative details. This second edition has been revised, while sections on Cherenkov radiation and radiation protection have been updated and extended.
Download or read book X rays in Atomic and Nuclear Physics written by Norman Allen Dyson and published by Cambridge University Press. This book was released on 1990-03-22 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the methods of X-ray production at a level which is accessible to advanced undergraduates and researchers who use X-rays. It also discusses the fundamentals of these physical properties from an experimental viewpoint which is not covered in more specialised texts.
Download or read book Particle Detectors written by Hermann Kolanoski and published by Oxford University Press. This book was released on 2020-06-30 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fundamentals of particle detectors as well as their applications. Detector development is an important part of nuclear, particle and astroparticle physics, and through its applications in radiation imaging, it paves the way for advancements in the biomedical and materials sciences. Knowledge in detector physics is one of the required skills of an experimental physicist in these fields. The breadth of knowledge required for detector development comprises many areas of physics and technology, starting from interactions of particles with matter, gas- and solid-state physics, over charge transport and signal development, to elements of microelectronics. The book's aim is to describe the fundamentals of detectors and their different variants and implementations as clearly as possible and as deeply as needed for a thorough understanding. While this comprehensive opus contains all the materials taught in experimental particle physics lectures or modules addressing detector physics at the Master's level, it also goes well beyond these basic requirements. This is an essential text for students who want to deepen their knowledge in this field. It is also a highly useful guide for lecturers and scientists looking for a starting point for detector development work.
Download or read book Spectroscopy for Materials Characterization written by Simonpietro Agnello and published by John Wiley & Sons. This book was released on 2021-09-08 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: SPECTROSCOPY FOR MATERIALS CHARACTERIZATION Learn foundational and advanced spectroscopy techniques from leading researchers in physics, chemistry, surface science, and nanoscience In Spectroscopy for Materials Characterization, accomplished researcher Simonpietro Agnello delivers a practical and accessible compilation of various spectroscopy techniques taught and used to today. The book offers a wide-ranging approach taught by leading researchers working in physics, chemistry, surface science, and nanoscience. It is ideal for both new students and advanced researchers studying and working with spectroscopy. Topics such as confocal and two photon spectroscopy, as well as infrared absorption and Raman and micro-Raman spectroscopy, are discussed, as are thermally stimulated luminescence and spectroscopic studies of radiation effects on optical materials. Each chapter includes a basic introduction to the theory necessary to understand a specific technique, details about the characteristic instrumental features and apparatuses used, including tips for the appropriate arrangement of a typical experiment, and a reproducible case study that shows the discussed techniques used in a real laboratory. Readers will benefit from the inclusion of: Complete and practical case studies at the conclusion of each chapter to highlight the concepts and techniques discussed in the material Citations of additional resources ideal for further study A thorough introduction to the basic aspects of radiation matter interaction in the visible-ultraviolet range and the fundamentals of absorption and emission A rigorous exploration of time resolved spectroscopy at the nanosecond and femtosecond intervals Perfect for Master and Ph.D. students and researchers in physics, chemistry, engineering, and biology, Spectroscopy for Materials Characterization will also earn a place in the libraries of materials science researchers and students seeking a one-stop reference to basic and advanced spectroscopy techniques.
Download or read book Passive Nondestructive Assay of Nuclear Materials written by Doug Reilly and published by . This book was released on 1991 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Plasma Spectroscopy written by Hans-Joachim Kunze and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although based on lectures given for graduate students and postgraduates starting in plasma physics, this concise introduction to the fundamental processes and tools is as well directed at established researchers who are newcomers to spectroscopy and seek quick access to the diagnostics of plasmas ranging from low- to high-density technical systems at low temperatures, as well as from low- to high-density hot plasmas. Basic ideas and fundamental concepts are introduced as well as typical instrumentation from the X-ray to the infrared spectral regions. Examples, techniques and methods illustrate the possibilities. This book directly addresses the experimentalist who actually has to carry out the experiments and their interpretation. For that reason about half of the book is devoted to experimental problems, the instrumentation, components, detectors and calibration.
Download or read book Solid State Nuclear Track Detection written by S. A. Durrani and published by Pergamon. This book was released on 1987 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Nuclear Track Detection: Principles, Methods and Applications is the second book written by the authors after Nuclear Tracks in Solids: Principles and Applications. The book is meant as an introduction to the subject solid state of nuclear track detection. The text covers the interactions of charged particles with matter; the nature of the charged-particle track; the methodology and geometry of track etching; thermal fading of latent damage trails on tracks; the use of dielectric track recorders in particle identification; radiation dossimetry; and solid state nuclear track detecti ...
Download or read book Nuclear Tracks in Solids written by Robert L. Fleischer and published by Univ of California Press. This book was released on 2022-05-27 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is part of UC Press's Voices Revived program, which commemorates University of California Press’s mission to seek out and cultivate the brightest minds and give them voice, reach, and impact. Drawing on a backlist dating to 1893, Voices Revived makes high-quality, peer-reviewed scholarship accessible once again using print-on-demand technology. This title was originally published in 1975.
