Download or read book ASM Ready Reference written by Fran Cverna and published by ASM International. This book was released on 2002-01-01 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: A quick and easy to use source for qualified thermal properties of metals and alloys. The data tables are arranged by material hierarchy, with summary tables sorted by property value. Values are given for a range of high and low temperatures. Short technical discussions at the beginning of each chapter are designed to refresh the reader's understanding of the properties and units covered in that section

Download or read book Mechanical Properties of Metals and Alloys written by John Laurence Everhart and published by . This book was released on 1943 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermomechanical Processing of High Strength Low Alloy Steels written by Imao Tamura and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermomechanical Processing of High-Strength Low-Alloy Steels considers some advanced techniques and metallurgical bases for controlled-rolling. This book contains 12 chapters. In Chapter 1, the purpose of thermomechanical processing and historical survey is described, while in Chapter 2, the kinetics of phase transformations and refinement of grain size in steels are elaborated. The techniques and metallurgical bases for controlled-rolling in the recrystallization, non-recrystallization, and (? + y) regions are reviewed in Chapters 3 to 5. Chapters 6 and 7 discuss the deformation resistance during hot-rolling and restoration processes. The phase transformations during cooling following hot-rolling are mentioned in Chapter 8, followed by a summarization of the effects of alloying elements in Chapter 9. Chapters 10 and 11 deal with the mechanical properties of controlled-rolled steel and prediction and control of microstructure and properties by thermomechanical processes. The problems faced and possibilities for future developments are stated in the last chapter. This publication is recommended for physicists, metallurgists, and researchers concerned with controlled-rolling, including non-specialists who have some knowledge of metallurgy.

Download or read book Recommended Values of Thermophysical Properties for Selected Commercial Alloys written by K. C. Mills and published by Woodhead Publishing. This book was released on 2002 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High temperature Property Data written by Michael F. Rothman and published by ASM International(OH). This book was released on 1988 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume organizes information by alloy so that pertinent data can be found easily. Physical and mechanical properties from room temperature to temperatures in excess of 100 C are shown graphically or in tabular form. All data is thoroughly referenced. Now high-temperature property data can be found in one complete reference! Over 200 alloys are organized by AISI number into 11 major sections: Irons, Carbon Steels, Alloy Steels, ASTM Steels, Low Alloy Constructional Steels, Ultra High Strength Steels, Tool Steels, Maraging Steels, Wrought Stainless Steels, Heat Resistant Casting Alloys, and Wrought Iron-Nickel Alloys and Iron-Nickel Superalloys. Each alloy record lists the designation, specifications, UNS number composition product forms and a comment on the high-temperature properties and applications. Data is then given for physical properties such as density, specific heat, thermal conductivity, thermal expansion, electrical conductivity. Poisons ratio, moduli of elasticity and rigidity, etc. Mechanical properties follow, and include tensile properties, shearing and bearing properties, impact properties, creep, stress rupture and stress relaxation, and fatigue properties.The last part of the alloy record gives other effects of temperature, such as hot hardness, corrosion, and growth.

Download or read book Improved Properties of Lead antimony Alloys by Thermomechanical Treatments written by Milton M. Tilman and published by . This book was released on 1975 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical and Physical Properties of Invar and Invar type Alloys written by W. S. McCain and published by . This book was released on 1965 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal Radiative Properties written by Yeram Sarkis Touloukian and published by Springer. This book was released on 1970 with total page 1670 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1957, the Thermophysical Properties Research that about 100 journals are required to yield fifty Center (TPRC) of Purdue University, under the percent. But that other fifty percent! It is scattered leadership ofits founder, Professor Y. S. Touloukian, through more than 3500 journals and other docu began to develop a coordinated experimental, ments, often items not readily identifiable or ob theoretical, and Iiterature review program covering tainable. Nearly 50,000 references are now in the a set of properties of great importance to science and files. technology. Over the years, this program has grown Thus, the man who wants to use existing data, steadily, producing bibliographies, data compila rather than make new measurements himself, faces tions and recommendations, experimental measure a long and costly task if he wants to assure hirnself ments, and other output. The series of volumes for that he has found all the relevant results. More often which these remarks constitute a foreword is one of than not, a search for data stops after one or two these many important products. These volumes are a results are found-or after the searcher decides he monumental accomplishment in themselves, re has spent enough time looking. Now with the quiring for their production the combined knowledge appearance of these volumes, the scientist or engineer and skills of dozens of dedicated specialists. The who needs these kinds of data can consider hirnself Thermophysical Properties Research Center de very fortunate.

Download or read book Thermo Mechanical Behaviour of Structural Lightweight Alloys written by Guillermo Requena and published by MDPI. This book was released on 2019-09-23 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to reduce the ecological footprint of water/land/air vehicles in this era of climate change requires pushing the limits regarding the development of lightweight structures and materials. This requires a thorough understanding of their thermomechanical behavior at several stages of the production chain. Moreover, during service, the response of lightweight alloys under the simultaneous influence of mechanical loads and temperature can determine the lifetime and performance of a multitude of structural components. The present Special Issue, comprising eight original research articles, is dedicated to disseminating current efforts around the globe aimed at advancing understanding of the thermomechanical behavior of structural lightweight alloys under processing or service conditions.

Download or read book Thermal and Time Stability of Amorphous Alloys written by A. M. Glezer and published by CRC Press. This book was released on 2017-09-07 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference is dedicated to the problem of time-temperature stability of amorphous (non-crystalline) metal alloys with strongly nonequilibrium structure and unique physical and mechanical properties that are obtained by quenching from the melt at a rate that exceeds one millions of degrees c.o.s. second. As a stability test, the behavior of the plasticity of amorphous alloys is studied. The book examines the fundamental characteristics of amorphous alloys, the basic laws of structural relaxation, generalized information about the phenomenon of the ductile-brittle transition (temper embrittlement), the development of physically justified methods of predicting the stability of the properties, and provides information about the attempts of controlling the structure for the purpose of suppressing or deceleration of the ductile-brittle transition and, as a consequence, increasing the temperature and temporal stability of the amorphous state.

Download or read book Thermal Properties of Titanium and Titanium Alloys written by J. W. Holladay and published by . This book was released on 1958 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Microstructure and Properties of Materials written by James Chen-Min Li and published by World Scientific. This book was released on 1996 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of an advanced textbook on microstructure and properties of materials. (The first volume is on aluminum alloys, nickel-based superalloys, metal matrix composites, polymer matrix composites, ceramics matrix composites, inorganic glasses, superconducting materials and magnetic materials). It covers titanium alloys, titanium aluminides, iron aluminides, iron and steels, iron-based bulk amorphous alloys and nanocrystalline materials.There are many elementary materials science textbooks, but one can find very few advanced texts suitable for graduate school courses. The contributors to this volume are experts in the subject, and hence, together with the first volume, it is a good text for graduate microstructure courses. It is a rich source of design ideas and applications, and will provide a good understanding of how microstructure affects the properties of materials.Chapter 1, on titanium alloys, covers production, thermomechanical processing, microstructure, mechanical properties and applications. Chapter 2, on titanium aluminides, discusses phase stability, bulk and defect properties, deformation mechanisms of single phase materials and polysynthetically twinned crystals, and interfacial structures and energies between phases of different compositions. Chapter 3, on iron aluminides, reviews the physical and mechanical metallurgy of Fe3Al and FeAl, the two important structural intermetallics. Chapter 4, on iron and steels, presents methodology, microstructure at various levels, strength, ductility and strengthening, toughness and toughening, environmental cracking and design against fracture for many different kinds of steels. Chapter 5, on bulk amorphous alloys, covers the critical cooling rate and the effect of composition on glass formation and the accompanying mechanical and magnetic properties of the glasses. Chapter 6, on nanocrystalline materials, describes the preparation from vapor, liquid and solid states, microstructure including grain boundaries and their junctions, stability with respect to grain growth, particulate consolidation while maintaining the nanoscale microstructure, physical, chemical, mechanical, electric, magnetic and optical properties and applications in cutting tools, superplasticity, coatings, transformers, magnetic recordings, catalysis and hydrogen storage.

Download or read book Carbon Nanotube Reinforced Polymers written by Roham Rafiee and published by Elsevier. This book was released on 2017-10-06 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanotube-Reinforced Polymers: From Nanoscale to Macroscale addresses the advances in nanotechnology that have led to the development of a new class of composite materials known as CNT-reinforced polymers. The low density and high aspect ratio, together with their exceptional mechanical, electrical and thermal properties, render carbon nanotubes as a good reinforcing agent for composites. In addition, these simulation and modeling techniques play a significant role in characterizing their properties and understanding their mechanical behavior, and are thus discussed and demonstrated in this comprehensive book that presents the state-of-the-art research in the field of modeling, characterization and processing. The book separates the theoretical studies on the mechanical properties of CNTs and their composites into atomistic modeling and continuum mechanics-based approaches, including both analytical and numerical ones, along with multi-scale modeling techniques. Different efforts have been done in this field to address the mechanical behavior of isolated CNTs and their composites by numerous researchers, signaling that this area of study is ongoing. Explains modeling approaches to carbon nanotubes, together with their application, strengths and limitations Outlines the properties of different carbon nanotube-based composites, exploring how they are used in the mechanical and structural components Analyzes the behavior of carbon nanotube-based composites in different conditions

Download or read book Effect of Thermomechanical Treatment on Mechanical Properties of Ti 7 5Mo Alloys written by 陳俊廷 and published by . This book was released on 2010 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aluminium and Its Alloys written by Charles Grard and published by . This book was released on 1921 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Thermal and Mechanical Treatments for Nickel and Some Nickel base Alloys Effects on Mechanical Properties written by Albert M. Hall and published by . This book was released on 1972 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Columbus Laboratories, Battelle Memorial Institute, originally prepared these reports in 1965 and later revised them, updating the information to include the latest technology through 1968. This report is one of a series pertaining to the fabricating of nickel, nickel-base, and cobalt-base alloys. This report deals with heat treating and working nickel and nickel-base alloys, and with the effects of these operations on the mechanical properties of the materials. The subjects covered are annealing, solution treating, stress relieving, stress equalizing, age hardening, hot working, cold working, combinations of working and heat treating (often referred to as thermomechanical treating), and properties of the materials at various temperatures. The equipment and procedures used in working the materials are discussed, along with the common problems that may be encountered and the precautions and corrective measures that are available."--Foreword.

Download or read book AB INITIO Modeling of Thermomechanical Properties of Mo Based Alloys for Fossil Energy Conversion written by and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In this final scientific/technical report covering the period of 3.5 years started on July 1, 2011, we report the accomplishments on the study of thermo-mechanical properties of Mo-based intermetallic compounds under NETL support. These include computational method development, physical properties investigation of Mo-based compounds and alloys. The main focus is on the mechanical and thermo mechanical properties at high temperature since these are the most crucial properties for their potential applications. In particular, recent development of applying ab initio molecular dynamic (AIMD) simulations to the T1 (Mo5Si3) and T2 (Mo5SiB2) phases are highlighted for alloy design in further improving their properties.