Download or read book Algorithms and Architectures for Cryptography and Source Coding in Non Volatile Flash Memories written by Malek Safieh and published by Springer Nature. This book was released on 2021-08-09 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, algorithms and architectures for cryptography and source coding are developed, which are suitable for many resource-constrained embedded systems such as non-volatile flash memories. A new concept for elliptic curve cryptography is presented, which uses an arithmetic over Gaussian integers. Gaussian integers are a subset of the complex numbers with integers as real and imaginary parts. Ordinary modular arithmetic over Gaussian integers is computational expensive. To reduce the complexity, a new arithmetic based on the Montgomery reduction is presented. For the elliptic curve point multiplication, this arithmetic over Gaussian integers improves the computational efficiency, the resistance against side channel attacks, and reduces the memory requirements. Furthermore, an efficient variant of the Lempel-Ziv-Welch (LZW) algorithm for universal lossless data compression is investigated. Instead of one LZW dictionary, this algorithm applies several dictionaries to speed up the encoding process. Two dictionary partitioning techniques are introduced that improve the compression rate and reduce the memory size of this parallel dictionary LZW algorithm.
Download or read book Algorithms and Architectures for Cryptography and Source Coding in Non Volatile Flash Memories written by Malek Safieh and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this work, algorithms and architectures for cryptography and source coding are developed, which are suitable for many resource-constrained embedded systems such as non-volatile flash memories. A new concept for elliptic curve cryptography is presented, which uses an arithmetic over Gaussian integers. Gaussian integers are a subset of the complex numbers with integers as real and imaginary parts. Ordinary modular arithmetic over Gaussian integers is computational expensive. To reduce the complexity, a new arithmetic based on the Montgomery reduction is presented. For the elliptic curve point multiplication, this arithmetic over Gaussian integers improves the computational efficiency, the resistance against side channel attacks, and reduces the memory requirements. Furthermore, an efficient variant of the Lempel-Ziv-Welch (LZW) algorithm for universal lossless data compression is investigated. Instead of one LZW dictionary, this algorithm applies several dictionaries to speed up the encoding process. Two dictionary partitioning techniques are introduced that improve the compression rate and reduce the memory size of this parallel dictionary LZW algorithm. About the Author Malek Safieh is a research scientist in the field of cryptography and data compression.
Download or read book Embedded Systems Architecture written by Daniele Lacamera and published by Packt Publishing Ltd. This book was released on 2023-01-13 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design safe and reliable software for embedded systems and explore the internals of device drivers, RTOS, and TEE Key Features Identify and overcome challenges in embedded environments Understand and implement the steps required to increase the security of IoT solutions Build safety-critical and memory-safe parallel and distributed embedded systems Book DescriptionEmbedded Systems Architecture begins with a bird’s-eye view of embedded development and how it differs from the other systems that you may be familiar with. This book will help you get the hang of the internal working of various components in real-world systems. You’ll start by setting up a development environment and then move on to the core system architectural concepts, exploring system designs, boot-up mechanisms, and memory management. As you progress through the topics, you’ll explore the programming interface and device drivers to establish communication via TCP/IP and take measures to increase the security of IoT solutions. Finally, you’ll be introduced to multithreaded operating systems through the development of a scheduler and the use of hardware-assisted trusted execution mechanisms. With the help of this book, you will gain the confidence to work with embedded systems at an architectural level and become familiar with various aspects of embedded software development on microcontrollers—such as memory management, multithreading, and RTOS—an approach oriented to memory isolation.What you will learn Participate in the design and definition phase of an embedded product Get to grips with writing code for ARM Cortex-M microcontrollers Build an embedded development lab and optimize the workflow Secure embedded systems with TLS Demystify the architecture behind the communication interfaces Understand the design and development patterns for connected and distributed devices in the IoT Master multitasking parallel execution patterns and real-time operating systems Become familiar with Trusted Execution Environment (TEE) Who this book is for If you're a software developer or designer looking to learn about embedded programming, this is the book for you. You’ll also find this book useful if you’re a beginner or a less experienced embedded programmer on a quest to expand your knowledge on embedded systems.
Download or read book Intelligent Computing written by Kohei Arai and published by Springer Nature. This book was released on 2021-07-05 with total page 1108 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collection of chapters focusing on the core areas of computing and their further applications in the real world. Each chapter is a paper presented at the Computing Conference 2021 held on 15-16 July 2021. Computing 2021 attracted a total of 638 submissions which underwent a double-blind peer review process. Of those 638 submissions, 235 submissions have been selected to be included in this book. The goal of this conference is to give a platform to researchers with fundamental contributions and to be a premier venue for academic and industry practitioners to share new ideas and development experiences. We hope that readers find this volume interesting and valuable as it provides the state-of-the-art intelligent methods and techniques for solving real-world problems. We also expect that the conference and its publications is a trigger for further related research and technology improvements in this important subject.
Download or read book Emerging Non Volatile Memories written by Seungbum Hong and published by Springer. This book was released on 2014-11-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the fundamentals of emerging non-volatile memories and provides an overview of future trends in the field. Readers will find coverage of seven important memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), Multiferroic RAM (MFRAM), Phase-Change Memories (PCM), Oxide-based Resistive RAM (RRAM), Probe Storage, and Polymer Memories. Chapters are structured to reflect diffusions and clashes between different topics. Emerging Non-Volatile Memories is an ideal book for graduate students, faculty, and professionals working in the area of non-volatile memory. This book also: Covers key memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), and Multiferroic RAM (MFRAM), among others. Provides an overview of non-volatile memory fundamentals. Broadens readers’ understanding of future trends in non-volatile memories.
Download or read book Logic Non volatile Memory The Nvm Solutions For Ememory written by Charles Ching-hsiang Hsu and published by World Scientific. This book was released on 2014-03-18 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Would you like to add the capabilities of the Non-Volatile Memory (NVM) as a storage element in your silicon integrated logic circuits, and as a trimming sector in your high voltage driver and other silicon integrated analog circuits? Would you like to learn how to embed the NVM into your silicon integrated circuit products to improve their performance?This book is written to help you.It provides comprehensive instructions on fabricating the NVM using the same processes you are using to fabricate your logic integrated circuits. We at our eMemory company call this technology the embedded Logic NVM. Because embedded Logic NVM has simple fabrication processes, it has replaced the conventional NVM in many traditional and new applications, including LCD driver, LED driver, MEMS controller, touch panel controller, power management unit, ambient and motion sensor controller, micro controller unit (MCU), security ID setting tag, RFID, NFC, PC camera controller, keyboard controller, and mouse controller. The recent explosive growth of the Logic NVM indicates that it will soon dominate all NVM applications. The embedded Logic NVM was invented and has been implemented in users' applications by the 200+ employees of our eMemory company, who are also the authors and author-assistants of this book.This book covers the following Logic NVM products: One Time Programmable (OTP) memory, Multiple Times Programmable (MTP) memory, Flash memory, and Electrically Erasable Programmable Read Only Memory (EEPROM). The fundamentals of the NVM are described in this book, which include: the physics and operations of the memory transistors, the basic building block of the memory cells and the access circuits.All of these products have been used continuously by the industry worldwide. In-depth readers can attain expert proficiency in the implementation of the embedded Logic NVM technology in their products.
Download or read book Principles of Secure Processor Architecture Design written by Jakub Szefer and published by Springer Nature. This book was released on 2022-06-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: With growing interest in computer security and the protection of the code and data which execute on commodity computers, the amount of hardware security features in today's processors has increased significantly over the recent years. No longer of just academic interest, security features inside processors have been embraced by industry as well, with a number of commercial secure processor architectures available today. This book aims to give readers insights into the principles behind the design of academic and commercial secure processor architectures. Secure processor architecture research is concerned with exploring and designing hardware features inside computer processors, features which can help protect confidentiality and integrity of the code and data executing on the processor. Unlike traditional processor architecture research that focuses on performance, efficiency, and energy as the first-order design objectives, secure processor architecture design has security as the first-order design objective (while still keeping the others as important design aspects that need to be considered). This book aims to present the different challenges of secure processor architecture design to graduate students interested in research on architecture and hardware security and computer architects working in industry interested in adding security features to their designs. It aims to educate readers about how the different challenges have been solved in the past and what are the best practices, i.e., the principles, for design of new secure processor architectures. Based on the careful review of past work by many computer architects and security researchers, readers also will come to know the five basic principles needed for secure processor architecture design. The book also presents existing research challenges and potential new research directions. Finally, this book presents numerous design suggestions, as well as discusses pitfalls and fallacies that designers should avoid.
Download or read book 3D Flash Memories written by Rino Micheloni and published by Springer. This book was released on 2016-05-26 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book walks the reader through the next step in the evolution of NAND flash memory technology, namely the development of 3D flash memories, in which multiple layers of memory cells are grown within the same piece of silicon. It describes their working principles, device architectures, fabrication techniques and practical implementations, and highlights why 3D flash is a brand new technology. After reviewing market trends for both NAND and solid state drives (SSDs), the book digs into the details of the flash memory cell itself, covering both floating gate and emerging charge trap technologies. There is a plethora of different materials and vertical integration schemes out there. New memory cells, new materials, new architectures (3D Stacked, BiCS and P-BiCS, 3D FG, 3D VG, 3D advanced architectures); basically, each NAND manufacturer has its own solution. Chapter 3 to chapter 7 offer a broad overview of how 3D can materialize. The 3D wave is impacting emerging memories as well and chapter 8 covers 3D RRAM (resistive RAM) crosspoint arrays. Visualizing 3D structures can be a challenge for the human brain: this is way all these chapters contain a lot of bird’s-eye views and cross sections along the 3 axes. The second part of the book is devoted to other important aspects, such as advanced packaging technology (i.e. TSV in chapter 9) and error correction codes, which have been leveraged to improve flash reliability for decades. Chapter 10 describes the evolution from legacy BCH to the most recent LDPC codes, while chapter 11 deals with some of the most recent advancements in the ECC field. Last but not least, chapter 12 looks at 3D flash memories from a system perspective. Is 14nm the last step for planar cells? Can 100 layers be integrated within the same piece of silicon? Is 4 bit/cell possible with 3D? Will 3D be reliable enough for enterprise and datacenter applications? These are some of the questions that this book helps answering by providing insights into 3D flash memory design, process technology and applications.
Download or read book VLSI Architecture written by Brian Randell and published by Prentice Hall International (UK). This book was released on 1983 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Flash Memory for Embedded Systems Technology Design for Sub systems and Innovations written by Hideto Hidaka and published by Springer. This book was released on 2017-09-09 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to embedded flash memory, describing the history, current status, and future projections for technology, circuits, and systems applications. The authors describe current main-stream embedded flash technologies from floating-gate 1Tr, floating-gate with split-gate (1.5Tr), and 1Tr/1.5Tr SONOS flash technologies and their successful creation of various applications. Comparisons of these embedded flash technologies and future projections are also provided. The authors demonstrate a variety of embedded applications for auto-motive, smart-IC cards, and low-power, representing the leading-edge technology developments for eFlash. The discussion also includes insights into future prospects of application-driven non-volatile memory technology in the era of smart advanced automotive system, such as ADAS (Advanced Driver Assistance System) and IoE (Internet of Everything). Trials on technology convergence and future prospects of embedded non-volatile memory in the new memory hierarchy are also described. Introduces the history of embedded flash memory technology for micro-controller products and how embedded flash innovations developed; Includes comprehensive and detailed descriptions of current main-stream embedded flash memory technologies, sub-system designs and applications; Explains why embedded flash memory requirements are different from those of stand-alone flash memory and how to achieve specific goals with technology development and circuit designs; Describes a mature and stable floating-gate 1Tr cell technology imported from stand-alone flash memory products - that then introduces embedded-specific split-gate memory cell technologies based on floating-gate storage structure and charge-trapping SONOS technology and their eFlash sub-system designs; Describes automotive and smart-IC card applications requirements and achievements in advanced eFlash beyond 4 0nm node.
Download or read book Error Correction Codes for Non Volatile Memories written by Rino Micheloni and published by Springer Science & Business Media. This book was released on 2008-06-03 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays it is hard to find an electronic device which does not use codes: for example, we listen to music via heavily encoded audio CD's and we watch movies via encoded DVD's. There is at least one area where the use of encoding/decoding is not so developed, yet: Flash non-volatile memories. Flash memory high-density, low power, cost effectiveness, and scalable design make it an ideal choice to fuel the explosion of multimedia products, like USB keys, MP3 players, digital cameras and solid-state disk. In ECC for Non-Volatile Memories the authors expose the basics of coding theory needed to understand the application to memories, as well as the relevant design topics, with reference to both NOR and NAND Flash architectures. A collection of software routines is also included for better understanding. The authors form a research group (now at Qimonda) which is the typical example of a fruitful collaboration between mathematicians and engineers.
Download or read book Computer Organization and Architecture written by Stallings and published by Pearson Education India. This book was released on 2008-02 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern C Design written by Andrei Alexandrescu and published by Addison-Wesley Professional. This book was released on 2001 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title documents a convergence of programming techniques - generic programming, template metaprogramming, object-oriented programming and design patterns. It describes the C++ techniques used in generic programming and implements a number of industrial strength components.
Download or read book IBM FlashSystem 7200 Product Guide written by Jon Herd and published by IBM Redbooks. This book was released on 2021-04-14 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® Product Guide publication describes the IBM FlashSystem® 7200 solution, which is a comprehensive, all-flash, and NVMe-enabled enterprise storage solution that delivers the full capabilities of IBM FlashCore® technology. In addition, it provides a rich set of software-defined storage (SDS) features, including data reduction and de-duplication, dynamic tiering, thin-provisioning, snapshots, cloning, replication, data copy services, and IBM HyperSwap® for high availability (HA). Scale-out and scale-up configurations further enhance capacity and throughput for better availability
Download or read book Digital Integrated Circuit Design written by Hubert Kaeslin and published by Cambridge University Press. This book was released on 2008-04-28 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical, tool-independent guide to designing digital circuits takes a unique, top-down approach, reflecting the nature of the design process in industry. Starting with architecture design, the book comprehensively explains the why and how of digital circuit design, using the physics designers need to know, and no more.
Download or read book A Practical Introduction to Data Structures and Algorithm Analysis written by Clifford A. Shaffer and published by . This book was released on 2001 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical text contains fairly "traditional" coverage of data structures with a clear and complete use of algorithm analysis, and some emphasis on file processing techniques as relevant to modern programmers. It fully integrates OO programming with these topics, as part of the detailed presentation of OO programming itself.Chapter topics include lists, stacks, and queues; binary and general trees; graphs; file processing and external sorting; searching; indexing; and limits to computation.For programmers who need a good reference on data structures.
Download or read book Flash Memories written by Paulo Cappelletti and published by Springer. This book was released on 1999-06-30 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Flash memory is a Non Volatile Memory (NVM) whose "unit cells" are fabricated in CMOS technology and programmed and erased electrically. In 1971, Frohman-Bentchkowsky developed a folating polysilicon gate tran sistor [1, 2], in which hot electrons were injected in the floating gate and removed by either Ultra-Violet (UV) internal photoemission or by Fowler Nordheim tunneling. This is the "unit cell" of EPROM (Electrically Pro grammable Read Only Memory), which, consisting of a single transistor, can be very densely integrated. EPROM memories are electrically programmed and erased by UV exposure for 20-30 mins. In the late 1970s, there have been many efforts to develop an electrically erasable EPROM, which resulted in EEPROMs (Electrically Erasable Programmable ROMs). EEPROMs use hot electron tunneling for program and Fowler-Nordheim tunneling for erase. The EEPROM cell consists of two transistors and a tunnel oxide, thus it is two or three times the size of an EPROM. Successively, the combination of hot carrier programming and tunnel erase was rediscovered to achieve a single transistor EEPROM, called Flash EEPROM. The first cell based on this concept has been presented in 1979 [3]; the first commercial product, a 256K memory chip, has been presented by Toshiba in 1984 [4]. The market did not take off until this technology was proven to be reliable and manufacturable [5].
