Download or read book Aircraft Engine Design written by Jack D. Mattingly and published by AIAA. This book was released on 2002 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A design textbook attempting to bridge the gap between traditional academic textbooks, which emphasize individual concepts and principles; and design handbooks, which provide collections of known solutions. The airbreathing gas turbine engine is the example used to teach principles and methods. The first edition appeared in 1987. The disk contains supplemental material. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Aircraft Engine Design written by Jack D. Mattingly and published by Aiaa. This book was released on 2002-01-01 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significantly expanded and modernized, this text emphasizes recent developments impacting engine design such as theta break/throttle ratio, life management, controls, and stealth. The key steps of the process are detailed in 10 chapters enhanced by AEDsys software on CD-ROM that provides comprehensive computational support for every design step. A user's manual is provided with the software, along with the complete data files used for the Air-to-Air Fighter and Global Range Airlifter design examples of the book.
Download or read book Aircraft Engine Controls written by Link C. Jaw and published by AIAA Education. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overview of engine control systems -- Engine modeling and simulation -- Model reduction and dynamic analysis -- Design of set-point controllers -- Design of transient and limit controllers -- Control system integration -- Advanced control concepts -- Engine monitoring and health management -- Integrated control and health monitoring -- Appendix A. Fundamentals of automatic control systems -- Appendix B. Gas turbine engine performance and operability.
Download or read book Aircraft Engine Design written by Joseph Liston and published by . This book was released on 1940 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines for Model Aircraft written by Kurt Schreckling and published by Traplet Publications. This book was released on 1994 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Aircraft Design written by John P. Fielding and published by Cambridge University Press. This book was released on 1999-10-14 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an accessible introduction to the fundamentals of civil and military aircraft design. Giving a largely descriptive overview of all aspects of the design process, this well-illustrated account provides an insight into the requirements of each specialist in an aircraft design team. After discussing the need for new designs, the text assesses the merits of different aircraft shapes from micro-lights and helicopters to super-jumbos and V/STOL aircraft. Following chapters explore structures, airframe systems, avionics and weapons systems. Later chapters examine the costs involved in the acquisition and operation of new aircraft, aircraft reliability and maintainability, and a variety of unsuccessful projects to see what conclusions can be drawn. Three appendices and a bibliography give a wealth of useful information, much not published elsewhere, including simple aerodynamic formulae, aircraft, engine and equipment data and a detailed description of a parametric study of a 500-seat transport aircraft.
Download or read book Simplified Aircraft Design for Homebuilders written by Daniel P. Raymer and published by Design Dimentions Press. This book was released on 2003 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Easy-to-follow, step-by-step methods to lay out, analyse, and optimise your new homebuilt aircraft concept; Industry methods distilled to the essence, and written in a straight forward, easy-to-read style; No derivations, proofs, or complicated equations. Every step is illustrated with an all-new design example that is followed through from beginning to end.
Download or read book Mike Busch on Engines written by Mike Busch and published by Createspace Independent Publishing Platform. This book was released on 2018-05-12 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The risk of engine failure is greatest when your engine is young, NOT when it's old. You should worry more about pediatrics than geriatrics." -Mike Busch A&P/IA Mike Busch on Engines expands the iconoclastic philosophy of his groundbreaking first book Manifesto to the design, operation, condition monitoring, maintenance and troubleshooting of piston aircraft engines. Busch begins with the history and theory of four-stroke spark-ignition engines. He describes the construction of both the "top end" (cylinders) and "bottom end" (inside the case), and functioning of key systems (lubrication, ignition, carburetion, fuel injection, turbocharging). He reviews modern engine leaning technique (which your POH probably has all wrong), and provides a detailed blueprint for maximizing the life of your engine. The second half presents a 21st-century approach to health assessment, maintenance, overhaul and troubleshooting. Busch explains how modern condition monitoring tools-like borescopy, oil analysis and digital engine monitor data analysis-allow you to extend engine life and overhaul strictly on-condition rather at an arbitrary TBO. The section devoted to troubleshooting problems like rough running, high oil consumption, temperamental ignition and turbocharging issues is worth its weight in gold. If you want your engine to live long and prosper, you need this book.
Download or read book Aircraft Propulsion Systems Technology and Design written by Gordon C. Oates and published by AIAA. This book was released on 1989 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book Model Jet Engines written by Thomas Kamps and published by . This book was released on 2005 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Performance Design written by John David Anderson and published by McGraw-Hill Science, Engineering & Mathematics. This book was released on 1999 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Balancing technical material with important historical aspects of the invention and design of aeroplanes, this book develops aircraft performance techniques from first principles and applies them to real aeroplanes.
Download or read book Aircraft Design written by Mohammad H. Sadraey and published by John Wiley & Sons. This book was released on 2012-11-20 with total page 811 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive approach to the air vehicle design process using the principles of systems engineering Due to the high cost and the risks associated with development, complex aircraft systems have become a prime candidate for the adoption of systems engineering methodologies. This book presents the entire process of aircraft design based on a systems engineering approach from conceptual design phase, through to preliminary design phase and to detail design phase. Presenting in one volume the methodologies behind aircraft design, this book covers the components and the issues affected by design procedures. The basic topics that are essential to the process, such as aerodynamics, flight stability and control, aero-structure, and aircraft performance are reviewed in various chapters where required. Based on these fundamentals and design requirements, the author explains the design process in a holistic manner to emphasise the integration of the individual components into the overall design. Throughout the book the various design options are considered and weighed against each other, to give readers a practical understanding of the process overall. Readers with knowledge of the fundamental concepts of aerodynamics, propulsion, aero-structure, and flight dynamics will find this book ideal to progress towards the next stage in their understanding of the topic. Furthermore, the broad variety of design techniques covered ensures that readers have the freedom and flexibility to satisfy the design requirements when approaching real-world projects. Key features: • Provides full coverage of the design aspects of an air vehicle including: aeronautical concepts, design techniques and design flowcharts • Features end of chapter problems to reinforce the learning process as well as fully solved design examples at component level • Includes fundamental explanations for aeronautical engineering students and practicing engineers • Features a solutions manual to sample questions on the book’s companion website Companion website - www.wiley.com/go/sadraey
Download or read book Studebaker s Xh 9350 and Their Involvement with Other Aircraft Engines written by William Pearce and published by . This book was released on 2018-11-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Before the United States entered World War II, the Army Air Corps conceptualized a large aircraft engine for which fuel efficiency was the paramount concern. It was believed that such an engine could power bombers from North America to attack targets in Europe, a tactic that would be needed if the United Kingdom were to fall. This engine project was known as MX-232, and Studebaker was tasked with its development. After years of testing and development, the MX-232 program produced the Studebaker XH-9350 engine design. Although a complete XH-9350 engine was not built, Studebaker's XH-9350 and Their Involvement with Other Aircraft Engines details the development of the MX-232 program and the XH-9350 design. In addition, the book covers Studebaker's work with other aircraft engines: the power plant for the Waterman Arrowbile, their licensed production of the Wright R-1820 radial engine during World War II, and their licensed production of the General Electric J47 jet engine during the Korean War.
Download or read book Modern Engineering for Design of Liquid Propellant Rocket Engines written by Dieter K. Huzel and published by AIAA. This book was released on 1992 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elements of Gas Turbine Propulsion written by Jack D. Mattingly and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to gas turbine engines and jet propulsion for aerospace or mechanical engineers. The text is divided into four parts: introduction to aircraft propulsion; basic concepts and one-dimensional/gas dynamics; parametric (design point) and performance (off-design) analysis of air breathing propulsion systems; and analysis and design of major gas turbine engine components (fans, compressors, turbines, inlets, nozzles, main burners, and afterburners). Design concepts are introduced early (aircraft performance in introductory chapter) and integrated throughout. Written with extensive student input on the design of the book, the book builds upon definitions and gradually develops the thermodynamics, gas dynamics, and gas turbine engine principles.
Download or read book Introduction to Aeronautics written by Steven A. Brandt and published by AIAA. This book was released on 2004 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
