Download or read book Aircraft Control Using Sliding Mode Control written by Christian Tournes and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Application of Sliding Mode Methods to the Design of Reconfigurable Flight Control Systems written by Scott R. Wells and published by . This book was released on 2002 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Observer-based sliding mode control is investigated for application to aircraft reconfigurable flight control. An overview of reconfigurable flight control is given, including a review of the current state-of-the-art within the subdisciplines of fault detection parameter identification, adaptive control schemes, and dynamic control allocation. Of the adaptive control methods reviewed, sliding mode control (SMC) appears promising due its property of invariance to matched uncertainty. An overview of SMC is given and its properties are demonstrated. Sliding mode methods, however, are difficult to implement because unmodeled parasitic dynamics cause immediate and severe instability. This presents a challenge for all practical applications with limited bandwidth actuators. One method to deal with parasitic dynamics is the use of an asymptotic observer. Observer-based SMC is investigated, and a method for selecting observer gains is offered. An additional method for shaping the feedback loop using a filter is also developed. It is shown that this SMC prefilter is equivalent to a form of model reference hedging. A complete design procedure is given which takes advantage of the sliding mode boundary layer to recast the SMC as a linear control law. Frequency domain loop shaping is then used to design the sliding manifold. Finally, three aircraft applications are demonstrated. An F-18/HARV is used to demonstrate SISO and MIMO designs. The third application is a linear six degree-of-freedom advanced tailless fighter model. The observer-based SMC is seen to provide excellent tracking with superior robustness to parameter changes and actuator failures.

Download or read book Simulator Study of Stall post stall Characteristics of a Fighter Airplane with Relaxed Longitudinal Static Stability written by and published by . This book was released on 1979 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Sliding Mode Control for Mechanical Systems written by Jinkun Liu and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation" takes readers through the basic concepts, covering the most recent research in sliding mode control. The book is written from the perspective of practical engineering and examines numerous classical sliding mode controllers, including continuous time sliding mode control, discrete time sliding mode control, fuzzy sliding mode control, neural sliding mode control, backstepping sliding mode control, dynamic sliding mode control, sliding mode control based on observer, terminal sliding mode control, sliding mode control for robot manipulators, and sliding mode control for aircraft. This book is intended for engineers and researchers working in the field of control. Dr. Jinkun Liu works at Beijing University of Aeronautics and Astronautics and Dr. Xinhua Wang works at the National University of Singapore.

Download or read book Recent Developments in Sliding Mode Control written by Andrzej Bartoszewicz and published by BoD – Books on Demand. This book was released on 2017-06-28 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main purpose of control engineering is to steer the regulated plant in such a way that it operates in a required manner. The desirable performance of the plant should be obtained despite the unpredictable influence of the environment on the control system and no matter if the plant parameters are precisely known. Even though the parameters may change with time and load, still the system should preserve its nominal properties and ensure the required behavior of the plant. In other words, the principal objective of control engineering is to design systems that are robust with respect to external disturbances and modeling uncertainty. This objective may be very well achieved using the sliding mode technique, which is the subject of this book.

Download or read book Sliding Mode Control Using MATLAB written by Jinkun Liu and published by Academic Press. This book was released on 2017-05-25 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sliding Mode Control Using MATLAB provides many sliding mode controller design examples, along with simulation examples and MATLAB® programs. Following the review of sliding mode control, the book includes sliding mode control for continuous systems, robust adaptive sliding mode control, sliding mode control for underactuated systems, backstepping, and dynamic surface sliding mode control, sliding mode control based on filter and observer, sliding mode control for discrete systems, fuzzy sliding mode control, neural network sliding mode control, and sliding mode control for robot manipulators. The contents of each chapter are independent, providing readers with information they can use for their own needs. It is suitable for the readers who work on mechanical and electronic engineering, electrical automation engineering, etc., and can also be used as a teaching reference for universities. Provides many sliding mode controller design examples to help readers solve their research and design problems Includes various, implementable, robust sliding mode control design solutions from engineering applications Provides the simulation examples and MATLAB programs for each sliding mode control algorithm

Download or read book Applications of Sliding Mode Control written by Nabil Derbel and published by Springer. This book was released on 2016-10-14 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential studies and applications in the context of sliding mode control, highlighting the latest findings from interdisciplinary theoretical studies, ranging from computational algorithm development to representative applications. Readers will learn how to easily tailor the techniques to accommodate their ad hoc applications. To make the content as accessible as possible, the book employs a clear route in each paper, moving from background to motivation, to quantitative development (equations), and lastly to case studies/illustrations/tutorials (simulations, experiences, curves, tables, etc.). Though primarily intended for graduate students, professors and researchers from related fields, the book will also benefit engineers and scientists from industry.

Download or read book Sliding Mode Control and Observation written by Yuri Shtessel and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sliding mode control methodology has proven effective in dealing with complex dynamical systems affected by disturbances, uncertainties and unmodeled dynamics. Robust control technology based on this methodology has been applied to many real-world problems, especially in the areas of aerospace control, electric power systems, electromechanical systems, and robotics. Sliding Mode Control and Observation represents the first textbook that starts with classical sliding mode control techniques and progresses toward newly developed higher-order sliding mode control and observation algorithms and their applications. The present volume addresses a range of sliding mode control issues, including: *Conventional sliding mode controller and observer design *Second-order sliding mode controllers and differentiators *Frequency domain analysis of conventional and second-order sliding mode controllers *Higher-order sliding mode controllers and differentiators *Higher-order sliding mode observers *Sliding mode disturbance observer based control *Numerous applications, including reusable launch vehicle and satellite formation control, blood glucose regulation, and car steering control are used as case studies Sliding Mode Control and Observation is aimed at graduate students with a basic knowledge of classical control theory and some knowledge of state-space methods and nonlinear systems, while being of interest to a wider audience of graduate students in electrical/mechanical/aerospace engineering and applied mathematics, as well as researchers in electrical, computer, chemical, civil, mechanical, aeronautical, and industrial engineering, applied mathematicians, control engineers, and physicists. Sliding Mode Control and Observation provides the necessary tools for graduate students, researchers and engineers to robustly control complex and uncertain nonlinear dynamical systems. Exercises provided at the end of each chapter make this an ideal text for an advanced course taught in control theory.

Download or read book Variable Structure Systems written by Asif Sabanovic and published by IET. This book was released on 2004-10-08 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book fulfils the definite need for an accessible book on variable structure systems and also provides the very latest results in research on this topic. Divided into three parts - basics of sliding mode control, new trends in sliding mode control, and applications of sliding mode control - the book contains many numerical design examples, so that readers can quickly understand the design methodologies and their applications to practical problems. Primarily aimed at students and researchers in the field, the book will also be useful for practising control engineers.

Download or read book Sliding mode Control Applied for Robust Control of a Highly Unstable Aircraft written by Travis Kenneth Vetter and published by . This book was released on 2002 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Model free Sliding Mode Control in the Lateral and Direction Dynamics of an Aircraft written by Nicholas Hutson and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Traditional control methods require extensive tuning or a derivation of a system model making them increasingly antiquated for use on new, more complex systems. Sliding Mode Control has emerged as a more effective alternative as a control method that can directly handle nonlinear systems with increased robustness while guaranteeing stability. However, it is still limited by the need for a system model for the derivation of the controller form. This work proposes a new model-free control method based on Sliding Mode Control referred to as Model-Free Sliding Mode Control where the form of the controller is only dependent on system order, state measurements, and previous control inputs. Lyapunov’s stability theorem is used to ensure global asymptotic stability and a boundary layer is incorporated to reduce chattering. The model-free properties of the controller are enabled by a least-squares online parameter estimation method used to estimate the control input influence gain matrix of the system directly. The estimation process is essential as previous work was limited by assuming the bounds of the control input influence gain matrix are known or the assumption it was unitary. The estimation method also incorporated exponential forgetting to only include updated data for parameter estimation, increasing the speed of convergence. Another addition was a bounded gain forgetting factor to ensure that the magnitude of the control input influence gain was upper bounded. The performance of this controller was simulated on various example systems to test its performance. These included single-input, single-output and multi-input, multi-output first and second order systems. Principally, the controller was implemented to control a lateral-directional state space model of an aircraft with a shaped input characterizing aircraft roll and yaw dynamics. The controller proved to exhibit outstanding tracking performance, convergence of estimated parameters, smooth and acceptable control input, and increased robustness to parameter uncertainty. Therefore, the controller was proven to be a feasible method to control the lateral and directional dynamics of an aircraft."--Abstract.

Download or read book Multivariable Sliding Mode Control Design for Aircraft Engines written by Sirirat Sangwian and published by . This book was released on 2011 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many control theories are used in controlling aircraft engines. However, the multivariablesliding mode control is not yet established in this application even though ithas a lot of potential in dealing with complex and nonlinear systems such as aircraftengines. Therefore, a guideline in developing multivariable sliding mode control law for an aircraft engine is presented in this thesis. The problem of chattering in thesliding mode control is suppressed by the use of the boundary layer method. The controllogic is tested by implementing NASA's Commercial Modular Aero-PropulsionSystem Simulation 40k (C-MAPSS40k). Simulation results are analyzed and comparedto the results obtained from the baseline controller. The robust property of multivariable sliding mode control is also examined by altering the flight condition ofthe engine.

Download or read book Fault Tolerant Control Schemes Using Integral Sliding Modes written by Mirza Tariq Hamayun and published by Springer. This book was released on 2016-04-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key attribute of a Fault Tolerant Control (FTC) system is its ability to maintain overall system stability and acceptable performance in the face of faults and failures within the feedback system. In this book Integral Sliding Mode (ISM) Control Allocation (CA) schemes for FTC are described, which have the potential to maintain close to nominal fault-free performance (for the entire system response), in the face of actuator faults and even complete failures of certain actuators. Broadly an ISM controller based around a model of the plant with the aim of creating a nonlinear fault tolerant feedback controller whose closed-loop performance is established during the design process. The second approach involves retro-fitting an ISM scheme to an existing feedback controller to introduce fault tolerance. This may be advantageous from an industrial perspective, because fault tolerance can be introduced without changing the existing control loops. A high fidelity benchmark model of a large transport aircraft is used to demonstrate the efficacy of the FTC schemes. In particular a scheme based on an LPV representation has been implemented and tested on a motion flight simulator.

Download or read book Fault Detection and Fault Tolerant Control Using Sliding Modes written by Halim Alwi and published by Springer Science & Business Media. This book was released on 2011-06-07 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fault Detection and Fault-tolerant Control Using Sliding Modes is the first text dedicated to showing the latest developments in the use of sliding-mode concepts for fault detection and isolation (FDI) and fault-tolerant control in dynamical engineering systems. It begins with an introduction to the basic concepts of sliding modes to provide a background to the field. This is followed by chapters that describe the use and design of sliding-mode observers for FDI using robust fault reconstruction. The development of a class of sliding-mode observers is described from first principles through to the latest schemes that circumvent minimum-phase and relative-degree conditions. Recent developments have shown that the field of fault tolerant control is a natural application of the well-known robustness properties of sliding-mode control. A family of sliding-mode control designs incorporating control allocation, which can deal with actuator failures directly by exploiting redundancy, is presented. Various realistic case studies, specifically highlighting aircraft systems and including results from the implementation of these designs on a motion flight simulator, are described. A reference and guide for researchers in fault detection and fault-tolerant control, this book will also be of interest to graduate students working with nonlinear systems and with sliding modes in particular. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Fault Tolerant Flight Control written by Christopher Edwards and published by Springer. This book was released on 2010-04-18 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by leading experts in the field, this book provides the state-of-the-art in terms of fault tolerant control applicable to civil aircraft. The book consists of five parts and includes online material.

Download or read book Sliding Mode Control In Engineering written by Wilfrid Perruquetti and published by CRC Press. This book was released on 2002-01-29 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of the most recent developments in the theory of non-Archimedean pseudo-differential equations and its application to stochastics and mathematical physics--offering current methods of construction for stochastic processes in the field of p-adic numbers and related structures. Develops a new theory for parabolic equat

Download or read book Robust Flight Control written by Jean-Francois Magni and published by Springer. This book was released on 1997-03-07 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: In October 1994, 22 organisations throughout Europe accepted a challenge to solve a specific robust flight control design problem. The results of that design challenge, presented at the GARTEUR Specialists' Workshop in Toulouse, France in April 1997, are reported here. Two flight control benchmarks are considered, based on the automatic landing phase of a large cargo aircraft and on the control of a military aircraft. Methods applied include: classical control; multi-objective optimisation; eigenstructure assignment; modal multi-model approach; LQ, Lyapunov and H¿-techniques; ¿-synthesis; nonlinear dynamic inversion; robust inverse dynamics estimation; model predictive control and following; and fuzzy control. Involved in the definition of the benchmarks and the evaluation process have been representatives from the European aeronautical industry, bringing a strong link with flight control law design practice.