Download or read book Airborne Electronic Hardware Design Assurance written by Randall Fulton and published by CRC Press. This book was released on 2017-08-01 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a Federal Aviation Administration (FAA) consultant designated engineering representative (DER) and an electronics hardware design engineer who together taught the DO-254 class at the Radio Technical Commission for Aeronautics, Inc. (RTCA) in Washington, District of Columbia, USA, Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 is a testimony to the lessons learned and wisdom gained from many years of first-hand experience in the design, verification, and approval of airborne electronic hardware. This practical guide to the use of RTCA/DO-254 in the development of airborne electronic hardware for safety critical airborne applications: Describes how to optimize engineering processes and practices to harmonize with DO-254 Addresses the single most problematic aspect of engineering and compliance to DO-254—poorly written requirements Includes a tutorial on how to write requirements that will minimize the cost and effort of electronic design and verification Discusses the common pitfalls encountered by practitioners of DO-254, along with how those pitfalls occur and what can be done about them Settles the ongoing debate and misconceptions about the true definition of a derived requirement Promotes embracing DO-254 as the best means to achieve compliance to it, as well as the best path to high-quality electronic hardware Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 offers real-world insight into RTCA/DO-254 and how its objectives can be satisfied. It provides engineers with valuable information that can be applied to any project to make compliance to DO-254 as easy and problem-free as possible.

Download or read book RTCA Inc Document RTCA DO 254 Design Assurance Guidance for Airborne Electronic Hardware written by United States. Federal Aviation Administration and published by . This book was released on 2005 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Developing Safety Critical Software written by Leanna Rierson and published by CRC Press. This book was released on 2017-12-19 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount of software used in safety-critical systems is increasing at a rapid rate. At the same time, software technology is changing, projects are pressed to develop software faster and more cheaply, and the software is being used in more critical ways. Developing Safety-Critical Software: A Practical Guide for Aviation Software and DO-178C Compliance equips you with the information you need to effectively and efficiently develop safety-critical, life-critical, and mission-critical software for aviation. The principles also apply to software for automotive, medical, nuclear, and other safety-critical domains. An international authority on safety-critical software, the author helped write DO-178C and the U.S. Federal Aviation Administration’s policy and guidance on safety-critical software. In this book, she draws on more than 20 years of experience as a certification authority, an avionics manufacturer, an aircraft integrator, and a software developer to present best practices, real-world examples, and concrete recommendations. The book includes: An overview of how software fits into the systems and safety processes Detailed examination of DO-178C and how to effectively apply the guidance Insight into the DO-178C-related documents on tool qualification (DO-330), model-based development (DO-331), object-oriented technology (DO-332), and formal methods (DO-333) Practical tips for the successful development of safety-critical software and certification Insightful coverage of some of the more challenging topics in safety-critical software development and verification, including real-time operating systems, partitioning, configuration data, software reuse, previously developed software, reverse engineering, and outsourcing and offshoring An invaluable reference for systems and software managers, developers, and quality assurance personnel, this book provides a wealth of information to help you develop, manage, and approve safety-critical software more confidently.

Download or read book Aircraft System Safety written by Duane Kritzinger and published by Woodhead Publishing. This book was released on 2016-09-12 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft System Safety: Assessments for Initial Airworthiness Certification presents a practical guide for the novice safety practitioner in the more specific area of assessing aircraft system failures to show compliance to regulations such as FAR25.1302 and 1309. A case study and safety strategy beginning in chapter two shows the reader how to bring safety assessment together in a logical and efficient manner. Written to supplement (not replace) the content of the advisory material to these regulations (e.g. AMC25.1309) as well as the main supporting reference standards (e.g. SAE ARP 4761, RTCA/DO-178, RTCA/DO-154), this book strives to amalgamate all these different documents into a consolidated strategy with simple process maps to aid in their understanding and optimise their efficient use. Covers the effect of design, manufacturing, and maintenance errors and the effects of common component errors Evaluates the malfunctioning of multiple aircraft components and the interaction which various aircraft systems have on the ability of the aircraft to continue safe flight and landing Presents and defines a case study (an aircraft modification program) and a safety strategy in the second chapter, after which each of the following chapters will explore the theory of the technique required and then apply the theory to the case study

Download or read book Civil Aircraft Electrical Power System Safety Assessment written by Peng Wang and published by Butterworth-Heinemann. This book was released on 2017-06-12 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Civil Aircraft Electrical Power System Safety Assessment: Issues and Practices provides guidelines and methods for conducting a safety assessment process on civil airborne systems and equipment. As civil aircraft electrical systems become more complicated, electrical wiring failures have become a huge concern in industry and government—especially on aging platforms. There have been several accidents (most recently battery problems on the Boeing 777) with some of these having a relationship to wiring and power generation. Featuring a case study on the continuous safety assessment process of the civil airborne electrical power system, this book addresses problems, issues and troubleshooting techniques such as single event effects (SEE), the failure effects of electrical wiring interconnection systems (EWIS), formal theories and safety analysis methods in civil aircrafts. Introduces how to conduct assignment of development assurance levels for the electrical power system Includes safety assessments of aging platforms and their respective Electrical Wiring Interconnection System (EWIS) Features material on failure mechanisms for wiring systems and discussion of Failure Modes and Effects Analysis (FMEA) sustainment

Download or read book Avionics written by Cary R. Spitzer and published by CRC Press. This book was released on 2018-10-03 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renamed to reflect the increased role of digital electronics in modern flight control systems, Cary Spitzer's industry-standard Digital Avionics Handbook, Second Edition is available in two comprehensive volumes designed to provide focused coverage for specialists working in different areas of avionics development. The second installment, Avionics: Development and Implementation explores the practical side of avionics. The book examines such topics as modeling and simulation, electronic hardware reliability, certification, fault tolerance, and several examples of real-world applications. New chapters discuss RTCA DO-297/EUROCAE ED-124 integrated modular avionics development and the Genesis platform.

Download or read book Learning and Relearning Equipment Complexity written by Sasho Andonov and published by CRC Press. This book was released on 2023-07-07 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: With industrial systems becoming ever more mechanized and reliant on advanced technology, the complexity of equipment, especially in risky industries, is increasing on a daily basis. A thorough understanding of operations and providing safety for these complex systems has become a firm requirement for many. This book offers the knowledge required by safety professionals to provide and maintain the safety of engineering complex systems. Through a scientific and engineering approach to designing, implementing, operating, and maintaining complex systems, Learning and Relearning Equipment Complexity: Achieving Safety in Engineering Complex Systems details the need for more engineering and scientific knowledge to understand and maintain their safety. It gives clear explanations of reasons for a system’s complexity, based on control systems and non-linear dynamics. In addition, the book addresses the necessary changes in the approach and the procedures for the safety assessment of engineering complex systems. The reader will develop a thorough understanding of what complex systems are, why they are complex, and how they are utilized. This book will appeal to any safety professional tasked with complex systems. This extends to professionals in risky industries such as aviation, nuclear power, chemicals, railway and transport, and pharmaceuticals.

Download or read book The Digital Signal Processing Handbook 3 Volume Set written by Vijay K. Madisetti and published by CRC Press. This book was released on 2018-10-08 with total page 2394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now available in a three-volume set, this updated and expanded edition of the bestselling Digital Signal Processing Handbook continues to provide the engineering community with authoritative coverage of the fundamental and specialized aspects of information-bearing signals in digital form. Encompassing essential background material, technical details, standards, and software, The Digital Signal Processing Handbook, Second Edition reflects cutting-edge information on signal processing algorithms and protocols related to speech, audio, multimedia, and video processing technology associated with standards ranging from WiMax to MP3 audio, low-power/high-performance DSPs, color image processing, and chips on video. The three-volume set draws on the experience of leading engineers, researchers, and scholars and includes 29 new chapters that address multimedia and Internet technologies, tomography, radar systems, architecture, standards, and future applications in speech, acoustics, video, radar, and telecommunications. Each volume in the set is also available individually ... Emphasizing theoretical concepts, Digital Signal Processing Fundamentals (Catalog no. 46063) provides comprehensive coverage of the basic foundations of DSP. Coverage includes: Signals and Systems, Signal Representation and Quantization, Fourier Transforms, Digital Filtering, Statistical Signal Processing, Adaptive Filtering, Inverse Problems and Signal Reconstruction, and Time–Frequency and Multirate Signal Processing. Wireless, Networking, Radar, Sensor Array Processing, and Nonlinear Signal Processing (Catalog no. 46047) thoroughly covers the foundations of signal processing related to wireless, radar, space–time coding, and mobile communications together with associated applications to networking, storage, and communications. Video, Speech, and Audio Signal Processing and Associated Standards, (Catalog no. 4608X) details the basic foundations of speech, audio, image, and video processing and associated applications to broadcast, storage, search and retrieval, and communications.

Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.

Download or read book Makers of the Microchip written by Christophe Lecuyer and published by MIT Press. This book was released on 2010-09-03 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first years of the company that developed the microchip and created the model for a successful Silicon Valley start-up. In the first three and a half years of its existence, Fairchild Semiconductor developed, produced, and marketed the device that would become the fundamental building block of the digital world: the microchip. Founded in 1957 by eight former employees of the Schockley Semiconductor Laboratory, Fairchild created the model for a successful Silicon Valley start-up: intense activity with a common goal, close collaboration, and a quick path to the market (Fairchild's first device hit the market just ten months after the company's founding). Fairchild Semiconductor was one of the first companies financed by venture capital, and its success inspired the establishment of venture capital firms in the San Francisco Bay area. These firms would finance the explosive growth of Silicon Valley over the next several decades. This history of the early years of Fairchild Semiconductor examines the technological, business, and social dynamics behind its innovative products. The centerpiece of the book is a collection of documents, reproduced in facsimile, including the company's first prospectus; ideas, sketches, and plans for the company's products; and a notebook kept by cofounder Jay Last that records problems, schedules, and tasks discussed at weekly meetings. A historical overview, interpretive essays, and an introduction to semiconductor technology in the period accompany these primary documents.

Download or read book Process Technology Equipment written by Center for the Advancement of Process Technology and published by Pearson. This book was released on 2010 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Equipmen t is designed to teach readers about equipment used in the process industries. This book includes a variety of topics including, valves, tanks, pumps, turbines, motors, heat exchangers, cooling towers, furnaces, boilers, separation equipment, reactors, filters, dryers and solids handling equipment. Each chapter contains objectives, key terms, a summary, review questions and activities to enhance the learning experience. Readers will find this book to be a valuable resource throughout their process technology career. The Center for the Advancement of Process Technology (CAPT) currently offers several instructor manuals and student workbooks for their books. Currently these must be PURCHASED by the instructor or institution. These materials, order forms, and pricing, can be viewed and purhcased at this website: http://www.naptaonline.org/app/learning

Download or read book Advances in Microelectronics Reviews Vol 1 written by Sergey Yurish and published by Lulu.com. This book was released on 2018-01-12 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1st volume of 'Advances in Microelectronics: Reviews' Book Series contains 19 chapters written by 72 authors from academia and industry from 16 countries. With unique combination of information in each volume, the 'Advances in Microelectronics: Reviews' Book Series will be of value for scientists and engineers in industry and at universities. In order to offer a fast and easy reading of the state of the art of each topic, every chapter in this book is independent and self-contained. All chapters have the same structure: first an introduction to specific topic under study; second particular field description including sensing applications. Each of chapter is ending by well selected list of references with books, journals, conference proceedings and web sites. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.

Download or read book Digital Avionics Handbook written by Cary Spitzer and published by CRC Press. This book was released on 2017-11-22 with total page 1185 pages. Available in PDF, EPUB and Kindle. Book excerpt: A perennial bestseller, the Digital Avionics Handbook offers a comprehensive view of avionics. Complete with case studies of avionics architectures as well as examples of modern systems flying on current military and civil aircraft, this Third Edition includes: Ten brand-new chapters covering new topics and emerging trends Significant restructuring to deliver a more coherent and cohesive story Updates to all existing chapters to reflect the latest software and technologies Featuring discussions of new data bus and display concepts involving retina scanning, speech interaction, and synthetic vision, the Digital Avionics Handbook, Third Edition provides practicing and aspiring electrical, aerospace, avionics, and control systems engineers with a pragmatic look at the present state of the art of avionics.

Download or read book THE AVIATION DEVELOPMENT ECOSYSTEM written by Vance Hilderman and published by . This book was released on 2021-03-20 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until this book, aviation developers were frantically forced to search thousand of aviation standards for relevant information on aircraft, systems, software, and hardware development. Similar to designing a skyscraper by searching through a hardware store for parts, the results were chaotic and disconnected at best. But Today, aviation systems are increasingly integrated, complex, and inter-related; indeed, a new Ecosystem approach is required to succeed in aviation development. In his latest book Aviation Development Ecosystem, one of the world's foremost authorities on aviation development and certification clearly describes and explains in detail the true "Ecosystem" of aviation Safety, Systems, Hardware, and Software and "How To" apply the related standards and guidelines TOGETHER, including the following for aircraft, ground systems, eVTOL, rotorcraft, civil aviation, and military aircraft: DO-178C for Airborne Software: ARP4754A for Aircraft & Systems Development ARP4761 for Safety & Assessments DO-254 for Airborne Hardware DO-278A for Ground & Satellite Based Systems TSO's, TC/STC's, & PMA's DO-330 for Software Tool Qualification DO-331 for Model-Based Development DO-332 for Object Oriented Technology DO-160 for Environmental Testing DO-200B for Aeronautical Data DO-326A for Cyber-Security Multi-Core Processing Requirements, Design and Logic/Code Implementation Validation & Verification Traceability & Transition Criteria Aviation Plans, Standards, & Checklists Quality Assurance & Certification Mitigating Common Mistakes Reducing Engineering / Certification Costs & Risks Best Practices and How-To-Succeed in Aviation Development & Certification The author, Mr. Vance Hilderman, was the principal founder/CTO of three of the world's most significant aviation development/certification companies including TekSci, HighRely, and AFuzion. Hilderman has trained over 25,500 engineers in 700 aviation companies and 30 countries the above topics. His intellectual property is in use by 70% of the world's top 300 aviation and systems developers worldwide, and he has employed and personally presided over 500 of the world's foremost aviation engineers on 300+ projects the past thirty-five years. This book is the Capstone of his career and he readily provides the practical knowledge gained via tens of thousands of hours personally designing and certifying the aviation systems relied upon today for civil aircraft, military aircraft, UAV's, eVTOL, satellites, ground systems, and UAS's.

Download or read book Handbook of Radio Engineering and Wireless Technology written by Kevin Merriman and published by . This book was released on 2019-06-25 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio engineering refers to the study and development of devices which have been designed to operate in the radio frequency spectrum between 3 kHz to 300 GHz. This includes all devices that transmit or receive a radio wave, like two-way radios, mobile phones and Wi-Fi. Wireless technology is associated with the transmission of information between two remote points without the presence of any electrical conductor. Radio waves are the primarily used wireless technology in GPS units, satellite television, wireless headphones, etc. The application of radio engineering and wireless technology are present in diverse industries. This book aims to provide detailed information about the modern concepts and theories related to this field. It elucidates the innovative models around prospective developments with respect to radio engineering and wireless technology. The various studies that are constantly contributing towards advancing technologies and evolution of these fields have also been included herein. This book is appropriate for students seeking detailed information in this area as well as for experts.

Download or read book Avionics Certification written by Vance Hilderman and published by Avionics Communications. This book was released on 2007 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building the Information Society written by Rene Jacquart and published by Springer. This book was released on 2008-04-08 with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the context of the 18th IFIP World Computer Congress (WCC’04), and beside the traditional organization of conferences, workshops, tutorials and student forum, it was decided to identify a range of topics of dramatic interest for the building of the Information Society. This has been featured as the "Topical day/session" track of the WCC’04. Topical Sessions have been selected in order to present syntheses, latest developments and/or challenges in different business and technical areas. Building the Information Society provides a deep perspective on domains including: the semantic integration of heterogeneous data, virtual realities and new entertainment, fault tolerance for trustworthy and dependable information infrastructures, abstract interpretation (and its use for verification of program properties), multimodal interaction, computer aided inventing, emerging tools and techniques for avionics certification, bio-, nano-, and information technologies, E-learning, perspectives on ambient intelligence, the grand challenge of building a theory of the Railway domain, open source software in dependable systems, interdependencies of critical infrastructure, social robots, as a challenge for machine intelligence. Building the Information Society comprises the articles produced in support of the Topical Sessions during the IFIP 18th World Computer Congress, which was held in August 2004 in Toulouse, France, and sponsored by the International Federation for Information Processing (IFIP).