Download or read book Ground Penetrating Radar Theory and Applications written by Harry M. Jol and published by Elsevier. This book was released on 2008-12-08 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-penetrating radar (GPR) is a rapidly developing field that has seen tremendous progress over the past 15 years. The development of GPR spans aspects of geophysical science, technology, and a wide range of scientific and engineering applications. It is the breadth of applications that has made GPR such a valuable tool in the geophysical consulting and geotechnical engineering industries, has lead to its rapid development, and inspired new areas of research in academia. The topic of GPR has gone from not even being mentioned in geophysical texts ten years ago to being the focus of hundreds of research papers and special issues of journals dedicated to the topic. The explosion of primary literature devoted to GPR technology, theory and applications, has lead to a strong demand for an up-to-date synthesis and overview of this rapidly developing field. Because there are specifics in the utilization of GPR for different applications, a review of the current state of development of the applications along with the fundamental theory is required. This book will provide sufficient detail to allow both practitioners and newcomers to the area of GPR to use it as a handbook and primary research reference.*Review of GPR theory and applications by leaders in the field*Up-to-date information and references*Effective handbook and primary research reference for both experienced practitioners and newcomers

Download or read book Advances in Measurement Technology Disaster Prevention and Mitigation written by Zongming Li and published by CRC Press. This book was released on 2022-12-09 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Measurement Technology, Disaster Prevention and Mitigation collects papers resulting from the conference on Measurement Technology, Disaster Prevention and Mitigation (MTDPM 2022), Zhengzhou, China, 27–29 May, 2022. The primary goal is to promote research and developmental activities in measurement, disaster prevention and mitigation, and another goal is to promote scientific information interchange between scholars from the top universities, business associations, research centers and high-tech enterprises working all around the world. The conference conducts in-depth exchanges and discussions on relevant topics such as measurement, disaster prevention and mitigation, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of measurement application, measurement in civil engineering and disaster reduction. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world comprehend the academic development trend and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.

Download or read book Bridging the Centuries with SAMPE s Materials and Processes Technology written by Steve Loud and published by Taylor & Francis. This book was released on 2000 with total page 2381 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emerging Technologies in NDT written by Gerhard Busse and published by CRC Press. This book was released on 2008-04-16 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-destructive testing (NDT) is a pertinent task in nearly every field of human activity, from the assuring of aircraft integrity to the evaluation of infrastructural decay caused by deterioration or damage. The development of non-destructive methods for quality management results in economic and environmental benefits, in an increase in product reliability, and in improved public safety and security. This book contains over fifty reviewed and edited papers on the innovative developments and new applications in NDT. It covers cutting-edge NDT methods, including optical, acoustic, ultrasonic, and electromagnetic techniques, tomography, radiography, and thermography. Intended for a researchers and practitioners involved with studying, testing and maintaining machinery, products and components in laboratory and industrial environments.

Download or read book Fundamentals of Ultrasonic Testing written by Chunguang Xu and published by CRC Press. This book was released on 2024-08-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the theory and state-of-the-art technologies of ultrasonic testing (UT), this book examines ultrasonic propagation in solids and its detection applications, and explores the intersection of UT technology with various fields of electromagnetics, optics and physics. UT is one of the most widely used nondestructive testing techniques due to its high performance in terms of detection efficiency and safety. The rapid development of modern industrial products and technologies has created a new challenge and demand for ultrasonic nondestructive testing technology. This book introduces the fundamentals of UT, including sound wave and sound field, interface wave theory and liquid-solid coupled sound field. It then discusses various types of UT methods, ranging from the critically refracted longitudinal wave method to ultrasonic surface wave and ultrasonic guided wave detection methods. Some newly developed UT techniques are also discussed, including phased-array UT, high-frequency UT and non-contact UT. This title will appeal to engineering students and technicians in the field of ultrasonic nondestructive testing.

Download or read book Sandwich Structures 7 Advancing with Sandwich Structures and Materials written by O.T. Thomsen and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sandwich structures represent a special form of a laminated composite material or structural elements, where a relatively thick, lightweight and compliant core material separates thin stiff and strong face sheets. The faces are usually made of laminated polymeric based composite materials, and typically, the core can be a honeycomb type material, a polymeric foam or balsa wood. The faces and the core are joined by adhesive bonding, which ensures the load transfer between the sandwich constituent parts. The result is a special laminate with very high bending stiffness and strength to weight ratios. Sandwich structures are being used successfully for a variety of applications such as spacecraft, aircraft, train and car structures, wind turbine blades, boat/ship superstructures, boat/ship hulls and many others. The overall objective of the 7th International Conference on Sandwich Structures (ICSS-7) is to provide a forum for the presentation and discussion of the latest research and technology on all aspects of sandwich structures and materials, spanning the entire spectrum of research to applications in all the fields listed above.

Download or read book Ultrasound in Food Processing written by Mar Villamiel and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I: Fundamentals of ultrasound This part will cover the main basic principles of ultrasound generation and propagation and those phenomena related to low and high intensity ultrasound applications. The mechanisms involved in food analysis and process monitoring and in food process intensification will be shown. Part II: Low intensity ultrasound applications Low intensity ultrasound applications have been used for non-destructive food analysis as well as for process monitoring. Ultrasonic techniques, based on velocity, attenuation or frequency spectrum analysis, may be considered as rapid, simple, portable and suitable for on-line measurements. Although industrial applications of low-intensity ultrasound, such as meat carcass evaluation, have been used in the food industry for decades, this section will cover the most novel applications, which could be considered as highly relevant for future application in the food industry. Chapters addressing this issue will be divided into three subsections: (1) food control, (2) process monitoring, (3) new trends. Part III: High intensity ultrasound applications High intensity ultrasound application constitutes a way to intensify many food processes. However, the efficient generation and application of ultrasound is essential to achieving a successful effect. This part of the book will begin with a chapter dealing with the importance of the design of efficient ultrasonic application systems. The medium is essential to achieve efficient transmission, and for that reason the particular challenges of applying ultrasound in different media will be addressed. The next part of this section constitutes an up-to-date vision of the use of high intensity ultrasound in food processes. The chapters will be divided into four sections, according to the medium in which the ultrasound vibration is transmitted from the transducers to the product being treated. Thus, solid, liquid, supercritical and gas media have been used for ultrasound propagation. Previous books addressing ultrasonic applications in food processing have been based on the process itself, so chapters have been divided in mass and heat transport, microbial inactivation, etc. This new book will propose a revolutionary overview of ultrasonic applications based on (in the authors’ opinion) the most relevant factor affecting the efficiency of ultrasound applications: the medium in which ultrasound is propagated. Depending on the medium, ultrasonic phenomena can be completely different, but it also affects the complexity of the ultrasonic generation, propagation and application. In addition, the effect of high intensity ultrasound on major components of food, such as proteins, carbohydrates and lipids will be also covered, since this type of information has not been deeply studied in previous books. Other aspects related to the challenges of food industry to incorporate ultrasound devices will be also considered. This point is also very important since, in the last few years, researchers have made huge efforts to integrate fully automated and efficient ultrasound systems to the food production lines but, in some cases, it was not satisfactory. In this sense, it is necessary to identify and review the main related problems to efficiently produce and transmit ultrasound, scale-up, reduce cost, save energy and guarantee the production of safe, healthy and high added value foods.

Download or read book Nondestructive Testing and Evaluation of Fiber Reinforced Composite Structures written by Shuncong Zhong and published by Springer Nature. This book was released on 2022-04-01 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed description of the most common nondestructive testing(NDT) techniques used for the testing and evaluation fiber-reinforced composite structures, during manufacturing and/or in service stages. In order to facilitate the understanding and the utility of the different NDT techniques presented, the book first provides some information regarding the defects and material degradation mechanisms observed in fiber-reinforced composite structures as well as their general description and most probable causes. It is written based on the extensive scientific research and engineering backgrounds of the authors in the NDT and structural health monitoring (SHM) of structural systems from various areas including electrical, mechanical, materials, civil and biomedical engineering. Pursuing a rigorous approach, the book establishes a fundamental framework for the NDT of fiber-reinforced composite structures, while emphasizing on the importance of technique’s spatial resolution, integrated systems analysis and the significance of the influence stemming from the applicability of the NDT and the physical parameters of the test structures in the selection and utilization of adequate NDT techniques. The book is intended for students who are interested in the NDT of fiber-reinforced composite structures, researchers investigating the applicability of different NDT techniques to the inspections of structural systems, and NDT researchers and engineers working on the optimization of NDT systems for specific applications involving the use of fiber-reinforced composite structures.

Download or read book Bearing Capacity of Roads Railways and Airfields written by Andreas Loizos and published by CRC Press. This book was released on 2017-07-20 with total page 3209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bearing Capacity of Roads, Railways and Airfields includes the contributions to the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields (BCRRA 2017, 28-30 June 2017, Athens, Greece). The papers cover aspects related to materials, laboratory testing, design, construction, maintenance and management systems of transport infrastructure, and focus on roads, railways and airfields. Additional aspects that concern new materials and characterization, alternative rehabilitation techniques, technological advances as well as pavement and railway track substructure sustainability are included. The contributions discuss new concepts and innovative solutions, and are concentrated but not limited on the following topics: · Unbound aggregate materials and soil properties · Bound materials characteritics, mechanical properties and testing · Effect of traffic loading · In-situ measurements techniques and monitoring · Structural evaluation · Pavement serviceability condition · Rehabilitation and maintenance issues · Geophysical assessment · Stabilization and reinforcement · Performance modeling · Environmental challenges · Life cycle assessment and sustainability Bearing Capacity of Roads, Railways and Airfields is essential reading for academics and professionals involved or interested in transport infrastructure systems, in particular roads, railways and airfields.

Download or read book Applications on Ultrasonic Wave written by Jaesun Lee and published by MDPI. This book was released on 2021-09-02 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents applications on the ultrasonic wave for material characterization and nondestructive evaluations. It could be of interest to the researchers and students who are studying on the fields of ultrasonic waves.

Download or read book Ultrasonic Transducers written by K Nakamura and published by Elsevier. This book was released on 2012-08-23 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic transducers are key components in sensors for distance, flow and level measurement as well as in power, biomedical and other applications of ultrasound. Ultrasonic transducers reviews recent research in the design and application of this important technology.Part one provides an overview of materials and design of ultrasonic transducers. Piezoelectricity and basic configurations are explored in depth, along with electromagnetic acoustic transducers, and the use of ceramics, thin film and single crystals in ultrasonic transducers. Part two goes on to investigate modelling and characterisation, with performance modelling, electrical evaluation, laser Doppler vibrometry and optical visualisation all considered in detail. Applications of ultrasonic transducers are the focus of part three, beginning with a review of surface acoustic wave devices and air-borne ultrasound transducers, and going on to consider ultrasonic transducers for use at high temperature and in flaw detection systems, power, biomedical and micro-scale ultrasonics, therapeutic ultrasound devices, piezoelectric and fibre optic hydrophones, and ultrasonic motors are also described.With its distinguished editor and expert team of international contributors,Ultrasonic transducers is an authoritative review of key developments for engineers and materials scientists involved in this area of technology as well as in its applications in sectors as diverse as electronics, wireless communication and medical diagnostics. - Reviews recent research in the design and application of ultrasonic transducers - Provides an overview of the materials and design of ultrasonic transducers, with an in-depth exploration of piezoelectricity and basic configurations - Investigates modelling and characterisation, applications of ultrasonic transducers, and ultrasonic transducers for use at high temperature and in flaw detection systems

Download or read book Evaluation of Quality and Safety of Agricultural Products by Non destructive Sensing Technology written by Jiangbo Li and published by Frontiers Media SA. This book was released on 2023-06-28 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quality and safety of agricultural products affect human nutrition and health. Agricultural products results from natural process influenced by a myriad of factors (e.g., genetics, environments before harvest, postharvest storage conditions). These factors lead to significant variations of agricultural products, externally and internally, which consequently pose great challenges with quality and safety evaluation. Development of advanced techniques for measuring agricultural product quality and safety is thus crucial to ensuring high quality, nutritious and safe food supplies. Non-destructive sensing technologies (e.g., optical, thermal, ultrasonic), in conjunction with advanced data analytics (e.g., machine learning) and control and automation technology, have evolved as a potent means for augmenting existing quality and safety control efforts of agricultural products, which largely rely on human or manual product assessment. With advancements in sensor and computer technologies, recent years have seen commercial-scale adoption of non-destructive sensing technology (e.g., machine vision, near-infrared spectroscopy) for postharvest quality evaluation for a diversity of specialty crop products (e.g., apples, citrus, kiwi). However, there are still numerous challenges with robust, high-performance detection of many quality and safety issues, such as subsurface/internal defects and contamination. This Research Topic covers the latest developments and applications of advanced non-destructive sensing technologies for quality and safety evaluation of agricultural products, with relevant areas including but not limited to: 1. Assessment of external and internal quality; 2. Detection of subsurface and internal defects; 3. Safety detection of agricultural products; 4. Design and development of advanced sensing system; 5. Multi-modal sensing and applications; 6. Online product grading and sorting; 7. Data handling methods (e.g., machine learning)

Download or read book Physical Ultrasonics of Composites written by Stanislav Rokhlin and published by Oxford University Press. This book was released on 2011-02-04 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Ultrasonics of Composites is a rigorous introduction to the characterization of composite materials by means of ultrasonic waves. Composites are treated here not simply as uniform media, but as inhomogeneous layered anisotropic media with internal structure characteristic of composite laminates. The objective here is to concentrate on exposing the singular behavior of ultrasonic waves as they interact with layered, anisotropic materials, materials which incorporate those structural elements typical of composite laminates. This book provides a synergistic description of both modeling and experimental methods in addressing wave propagation phenomena and composite property measurements. After a brief review of basic composite mechanics, a thorough treatment of ultrasonics in anisotropic media is presented, along with composite characterization methods. The interaction of ultrasonic waves at interfaces of anisotropic materials is discussed, as are guided waves in composite plates and rods. Waves in layered media are developed from the standpoint of the "Stiffness Matrix", a major advance over the conventional, potentially unstable Transfer Matrix approach. Laminated plates are treated both with the stiffness matrix and using Floquet analysis. The important influence on the received electronic signals in ultrasonic materials characterization from transducer geometry and placement are carefully exposed in a dedicated chapter. Ultrasonic wave interactions are especially susceptible to such influences because ultrasonic transducers are seldom more than a dozen or so wavelengths in diameter. The book ends with a chapter devoted to the emerging field of air-coupled ultrasonics. This new technology has come of age with the development of purpose-built transducers and electronics and is finding ever wider applications, particularly in the characterization of composite laminates.

Download or read book New Technologies in Electromagnetic Non destructive Testing written by Songling Huang and published by Springer. This book was released on 2016-03-05 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces novel developments in the field of electromagnetic non-destructive testing and evaluation (NDT/E). The topics include electromagnetic ultrasonic guided wave testing, pulsed eddy current testing, remote field eddy current testing, low frequency eddy current testing, metal magnetic memory testing, and magnetic flux leakage testing. Considering the increasing concern about the safety maintenance of critical structures in various industries and everyday life, these topics presented here will be of particular interest to the readers in the NDT/E field. This book covers both theoretical researches and the engineering applications of the electromagnetic NDT technology. It could serve as a valuable reference for college students and relevant NDT technicians. It is also a useful material for qualification training and higher learning for nondestructive testing professionals.

Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 2348 pages. Available in PDF, EPUB and Kindle. Book excerpt: These Proceedings, consisting of Parts A and B, contain the edited versions of most of the papers presented at the annual Review of Progress in Quantitative Nondestructive Evaluation held at the University of Washington, Seattle on July 30 to August 4, 1995. The Review was organized by the Center for NDE at Iowa State University, in cooperation with the Ames Laboratory of the USDOE, the American Society of Nondestructive Testing, the Department of Energy, the National Institute of Standards and Technology, the Federal Aviation Administration, the National Science Foundation IndustryiUniversity Cooperative Research Centers, and the Working Group in Quantitative NDE. This year's Review of Progress in QNDE was attended by approximately 450 participants from the US and many foreign countries who presented over 375 papers. The meeting was divided into 36 sessions with as many as four sessions running concurrently. The Review covered all phases of NDE research and development from fundamental investigations to engineering applications or inspection systems, and it included many important methods of inspection science from acoustics to x-rays. In the last several years, the Review has stabilized at about its current size. Most participants seem to agree it is large enough to permit a full-scale overview of the latest developments but still small enough to retain the collegial atmosphere which has marked the Review since its inception. The Proceedings are structured in a format to reflect the organization of the Review itself, producing a more logical organization for both the meeting and the present volume.

Download or read book TMS 2012 141st Annual Meeting and Exhibition Materials Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2012-05-15 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains chapters on cutting-edge developments presented at the TMS annual conference of 2012.

Download or read book Delamination in Wood Wood Products and Wood Based Composites written by Voichita Bucur and published by Springer Science & Business Media. This book was released on 2010-11-02 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last quarter century, delamination has come to mean more than just a failure in adhesion between layers of bonded composite plies that might affect their load-bearing capacity. Ever-increasing computer power has meant that we can now detect and analyze delamination between, for example, cell walls in solid wood. This fast-moving and critically important field of study is covered in a book that provides everyone from manufacturers to research scientists the state of the art in wood delamination studies. Divided into three sections, the book first details the general aspects of the subject, from basic information including terminology, to the theoretical basis for the evaluation of delamination. A settled terminology in this subject area is a first key goal of the book, as the terms which describe delamination in wood and wood-based composites are numerous and often confusing. The second section examines different and highly specialized methods for delamination detection such as confocal laser scanning microscopy, light microscopy, scanning electron microscopy and ultrasonics. Ways in which NDE (non-destructive evaluation) can be employed to detect and locate defects are also covered. The book’s final section focuses on the practical aspects of this defect in a wide range of wood products covering the spectrum from trees, logs, laminated panels and glued laminated timbers to parquet floors. Intended as a primary reference, this book covers everything from the microscopic, anatomical level of delamination within solid wood sections to an examination of the interface of wood and its surface coatings. It provides readers with the perspective of industry as well as laboratory and is thus a highly practical sourcebook for wood engineers working in manufacturing as well as a comprehensively referenced text for materials scientists wrestling with the theory underlying the subject.