Download or read book Air conditioning System Design Manual written by Walter T. Grondzik and published by Elsevier. This book was released on 2007 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Air Conditioning Manual assists entry-level engineers in the design of air-conditioning systems. It is also usable - in conjunction with fundamental HVAC&R resource material - as a senior- or graduate-level text for a university course in HVAC system design. The manual was written to fill the void between theory and practice - to bridge the gap between real-world design practices and the theoretical calculations and analytical procedures or on the design of components. This second edition represents an update and revision of the manual. It now features the use of SI units throughout, updated references and the editing of many illustrations. * Helps engineers quickly come up with a design solution to a required air conditioning system. * Includes issues from comfort to cooling load calculations. * New sections on "Green HVAC" systems deal with hot topic of sustainable buildings.
Download or read book Air Conditioning System Design Manual Third Edition written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Air conditioning Systems Design Manual written by Harold G. Lorsch and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HVAC Design Manual for Hospitals and Clinics written by ASHRAE (Firm) and published by Ashrae. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health care HVAC systems serve facilities in which the population is uniquely vulnerable and exposed to an elevated risk of health, fire, and safety hazard. These heavily regulated, high-stakes facilities undergo continuous maintenance, verification, inspection, and recertification, typically operate 24/7, and are owner occupied for long life. The HVAC systems in health care facilities must be carefully designed to be installed, operated and maintained in coordination with specialized buildings services, including emergency and normal power, plumbing and medical gas systems, automatic transport, fire protections and a myriad of IT systems, all within a limited building envelope.
Download or read book Air Conditioning Systems Design Manual written by Harold G. Lorsch and published by . This book was released on 1993 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ASHRAE 581-RP Project Team
Download or read book HVAC Design Sourcebook written by W. Larsen Angel and published by McGraw Hill Professional. This book was released on 2011-11-07 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE DEFINITIVE GUIDE TO HVAC DESIGN This practical manual describes the HVAC system design process step by step using photographs, drawings, and a discussion of pertinent design considerations for different types of HVAC components and systems. Photographs of HVAC components in their installed condition illustrate actual size and proper configuration. Graphical representations of the components as they should appear on construction drawings are also included. Learn how to design HVAC systems accurately and efficiently from this detailed resource. HVAC DESIGN SOURCEBOOK COVERS: The design process HVAC load calculations Codes and standards Coordination with other design disciplines Piping, valves, and specialties Central plant equipment and design Air system equipment and design Piping and ductwork distribution systems Terminal equipment Noise and vibration control Automatic temperature controls Construction drawings
Download or read book Air Conditioning System Design written by Roger Legg and published by Butterworth-Heinemann. This book was released on 2017-06-15 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Air Conditioning System Design summarizes essential theory and then explains how the latest air conditioning technology operates. Load calculations, energy efficiency, and selection of technology are all explained in the context of air conditioning as a system, helping the reader fully consider the implications of design decisions. Whether users need to figure out how to apply their mechanical engineering degree to an air conditioning design task or simply want to find out more about air conditioning technology for a research project, this book provides a perfect guide. - Approaches air conditioning as a system, not just a collection of machines - Covers the essential theory on fluid flow and the latest in A/C technology in a very readable and easy-to-use style - Explains the significance of factors, such as climate and thermal comfort as A/C design considerations - Addresses design using a range of air conditioning technologies, such as evaporative cooling, VRF systems, psychromatic software, and dessicant dehumidification
Download or read book HVAC Simplified written by Stephen P. Kavanaugh and published by American Society of Heating Refrigerating and Air-Conditioning Engineers. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: HVAC Simplified (zip file)This text provides an understanding of fundamental HVAC concepts and how to extend these principles to the explanation of simple design tools used to create building systems that are efficient and provide comfortable and healthy environments. The text contains twelve chapters that review the fundamentals of refrigeration, heat transfer, and psychrometrics. Information from the ASHRAE Handbook"Fundamentals is summarized and supplemented with items from industry sources. The remaining chapters assemble information from ASHRAE Handbooks, ASHRAE standards and manufacturer data present design procedures commonly used by professional engineers. Other topics include equipment selection and specification, comfort and IAQ, building assemblies, heating and cooling loads, air distribution system design, water distribution system design, electrical and control systems, design for energy efficiency, and design for economic value. A suite of complementary spreadsheet programs that incorporate design and computation procedures from the text are provided on the CD that accompanies this book. These programs include psychrometric analysis, equipment selection, heating and cooling load calculation, an electronic "ductulator," piping system design, a ductwork cost calculator, and programs to evaluate building system demand and energy efficiency. Future updates to these programs can be found at www.ashrae.org/updates. The downloadable version of this product comes as a zip file and includes a PDF of the User's Manual and all the supporting files located on the CD that accompanies the print version. You must have WinZip to open the download.
Download or read book Handbook of Air Conditioning and Refrigeration written by Shan K. Wang and published by McGraw Hill Professional. This book was released on 2000-11-07 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: * A broad range of disciplines--energy conservation and air quality issues, construction and design, and the manufacture of temperature-sensitive products and materials--is covered in this comprehensive handbook * Provide essential, up-to-date HVAC data, codes, standards, and guidelines, all conveniently located in one volume * A definitive reference source on the design, selection and operation of A/C and refrigeration systems
Download or read book Heating and Cooling of Buildings written by T. Reddy and published by CRC Press. This book was released on 2016-09-01 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Follows a strict pedagogical structure and content sequence tested over fifteen years of teaching. Starts by coverings the most up-to-date calculation procedures and standards from ASHRAE and other organizations relevant to building loads, then provides a detailed treatment of primary, traditional secondary and hybrid/emerging secondary equipment and systems. Addresses contemporary issues such as emerging green building design technologies, alternative energy sources, and uncertainties in simulation. Discusses drivers for efficiency such as codes and standards, building rating systems, design guides, and the green building movement Offers a complete Solutions Manual, chapter outcomes, free HCB software download along with associated resources, and detailed and tested slides of individual chapters for classroom projection for qualified instructors adopting the text, with access through author's website
Download or read book Pressure Vessel Design Manual written by Dennis R. Moss and published by Butterworth-Heinemann. This book was released on 2012-12-31 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. - Covers almost all problems that a working pressure vessel designer can expect to face, with 50+ step-by-step design procedures including a wealth of equations, explanations and data - Internationally recognized, widely referenced and trusted, with 20+ years of use in over 30 countries making it an accepted industry standard guide - Now revised with up-to-date ASME, ASCE and API regulatory code information, and dual unit coverage for increased ease of international use
Download or read book Handbook of Air Conditioning System Design written by Carrier Corporation. Carrier Air Conditioning Company and published by McGraw-Hill Companies. This book was released on 1965 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASHRAE Laboratory Design Guide written by and published by Ashrae. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reference manual for planning, design, and operation of laboratory HVAC systems to reduce the laboratory's energy footprint while ensuring safety, providing good comfort and indoor air quality, and protecting the integrity of experiments; includes online access to electronic design tools that illustrate features of laboratories and provide practical design aids"--
Download or read book HVAC Engineer s Handbook written by Fred Porges and published by Routledge. This book was released on 2001 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the almost sixty years since the publication of the first edition of HVAC Engineer's Handbook, it has become widely known as a highly useful and definitive reference for HVAC engineers and technicians alike, and those working on domestic hot and cold water services, gas supply and steam services. The 11th edition continues in the tradition of previous editions, being easily transportable and therefore an integral part of the HVAC engineer or technician's daily tools. Newly updated data on natural ventilation, ventilation rates, free cooling and night-time cooling, make the 11th edition of the HVAC Engineer's Handbook a vital source of information. Fred Porges has worked in both the manufacturing and process industries, and became a partner in a building services consultancy in 1962. He has held senior positions with design contractors, and his experience covers every building service and type of building from schools to housing, factories to laboratories.
Download or read book Automotive Air Conditioning and Climate Control Systems written by Steven Daly and published by Elsevier. This book was released on 2011-04-18 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Air-conditioning and Climate Control Systems is a complete text and reference on the theoretical, practical and legislative aspects of vehicle climate control systems for automotive engineering students and service professionals. It provides the reader with a thorough up-to-date knowledge of current A/C systems, refrigerants and the new possible replacement systems like CO2, and includes unrivalled coverage of electronic and electrical control. Filling the gap in the automotive engineering and servicing market for students and those training on the job, this book will help both newcomers and those with more experience of air-conditioning systems maintenance engineering to keep up with the latest developments and legislation. Detailed coverage of European and US vehicle HVAC systems Thorough explanation of current and future systems including CO2 Meets relevant C&G, IMI, and HND vocational and professional qualifications IMI recommended reading material Includes practical cases studies and examples from design and manufacturing companies including Ford, Vauxhall, Toyota, VW, Visteon, Sanden and others, accompanied by over 300 detailed illustrations and photographs
Download or read book HVAC written by Ali Vedavarz and published by Industrial Press Inc.. This book was released on 2007 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive handbook and essential reference, providing instant access to all the data, calculations, and equations needed for modern HVAC design.
Download or read book Heating Cooling Lighting written by Norbert Lechner and published by Wiley-Interscience. This book was released on 1991-01-16 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using a qualitative rather than a quantitative approach, presents detailed information based on concepts, rules, guidelines, intuition, and experience for architects in the areas of heating, cooling, and lighting at the schematic design stage. The data explored supports a three-tiered approach--load avoidance, using natural energy sources, and mechanical equipment. Among the topics covered are shading, thermal envelope, passive heating and cooling, electric lighting, and HVAC. Case studies illustrate how certain buildings use techniques at all three tiers for heating, cooling, and lighting. An appendix lists some of the more appropriate computer programs available to the architect for analysis at the schematic design stage.
