Download or read book Agent Based Manufacturing and Control Systems written by Massimo Paolucci and published by CRC Press. This book was released on 2004-10-28 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditional manufacturing systems rely upon centralized, hierarchical systems that are not responsive enough to the increasing demand for mass customization. Decentralized, or heterarchical, management systems using autonomous agents promise to nullify the limitations of previous solutions. Agent-Based Manufacturing and Control Systems: New
Download or read book Agent Based Manufacturing written by S.M. Deen and published by Springer Science & Business Media. This book was released on 2003-04-16 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-volume high-variety products like personalized cars or customized engines will be the key issues for manufacturing in the 21st century. The necessary control technology is based on the concept of holons, which are the units of production and behave as autonomous and cooperative agents, providing flexibility, adaptability, agility, and dynamic reconfigurability. This book presents the latest research results in agent-based manufacturing as carried out by researchers in academia and industry within the international "Holonic Manufacturing Systems" project. As this project was driven by industry, the results presented here are of vital interest not just to researchers in agent technologies or distributed artificial intelligence, but also to engineers and professionals in industry who have to respond to rapid changes and new demands in production.
Download or read book Multi Agent Based Production Planning and Control written by Jie Zhang and published by John Wiley & Sons. This book was released on 2017-08-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the crossroads of artificial intelligence, manufacturing engineering, operational research and industrial engineering and management, multi-agent based production planning and control is an intelligent and industrially crucial technology with increasing importance. This book provides a complete overview of multi-agent based methods for today’s competitive manufacturing environment, including the Job Shop Manufacturing and Re-entrant Manufacturing processes. In addition to the basic control and scheduling systems, the author also highlights advance research in numerical optimization methods and wireless sensor networks and their impact on intelligent production planning and control system operation. Enables students, researchers and engineers to understand the fundamentals and theories of multi-agent based production planning and control Written by an author with more than 20 years’ experience in studying and formulating a complete theoretical system in production planning technologies Fully illustrated throughout, the methods for production planning, scheduling and controlling are presented using experiments, numerical simulations and theoretical analysis Comprehensive and concise, Multi-Agent Based Production Planning and Control is aimed at the practicing engineer and graduate student in industrial engineering, operational research, and mechanical engineering. It is also a handy guide for advanced students in artificial intelligence and computer engineering.
Download or read book Multiagent Systems for Manufacturing Control written by Stefan Bussmann and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a methodology developed by DaimlerChrysler. Illustrates the methodology through detailed case studies.
Download or read book Multi Agent Systems for Concurrent Intelligent Design and Manufacturing written by Weiming Shen and published by CRC Press. This book was released on 2003-09-02 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agent Technology, or Agent-Based Approaches, is a new paradigm for developing software applications. It has been hailed as 'the next significant breakthrough in software development', and 'the new revolution in software' after object technology or object-oriented programming. In this context, an agent is a computer system which is capable of acting autonomously in its environment in order to meet its design objectives. So in the area of concurrent design and manufacturing, a manufacturing resource, namely a machine or an operator, may cooperate and negotiate with other agents for task assignment; and an existing engineering software can be integrated with a distributed integrated engineering design and manufacturing system. Hence in agent-based systems, there is no centralized system control structure, and no pre-defined agenda for the system execution, as exist in traditional systems. This book systematically describes the principles, key issues, and applications of agent technology in relation to concurrent engineering design and manufacturing. It introduces the methodology, standards, frameworks, tools, and languages of agent-based approaches and presents a general procedure for building agent-based concurrent engineering design and manufacturing systems. Both professional and university researchers and postgraduates should find this an invaluable presentation of the corresponding theories and methods, with some practical examples for developing multi-agent systems in the domain.
Download or read book An Introduction to Agent Based Modeling written by Uri Wilensky and published by MIT Press. This book was released on 2015-04-03 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and hands-on introduction to the core concepts, methods, and applications of agent-based modeling, including detailed NetLogo examples. The advent of widespread fast computing has enabled us to work on more complex problems and to build and analyze more complex models. This book provides an introduction to one of the primary methodologies for research in this new field of knowledge. Agent-based modeling (ABM) offers a new way of doing science: by conducting computer-based experiments. ABM is applicable to complex systems embedded in natural, social, and engineered contexts, across domains that range from engineering to ecology. An Introduction to Agent-Based Modeling offers a comprehensive description of the core concepts, methods, and applications of ABM. Its hands-on approach—with hundreds of examples and exercises using NetLogo—enables readers to begin constructing models immediately, regardless of experience or discipline. The book first describes the nature and rationale of agent-based modeling, then presents the methodology for designing and building ABMs, and finally discusses how to utilize ABMs to answer complex questions. Features in each chapter include step-by-step guides to developing models in the main text; text boxes with additional information and concepts; end-of-chapter explorations; and references and lists of relevant reading. There is also an accompanying website with all the models and code.
Download or read book Multi Agent Based Production Planning and Control written by Jie Zhang and published by John Wiley & Sons. This book was released on 2017-05-15 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the crossroads of artificial intelligence, manufacturing engineering, operational research and industrial engineering and management, multi-agent based production planning and control is an intelligent and industrially crucial technology with increasing importance. This book provides a complete overview of multi-agent based methods for today’s competitive manufacturing environment, including the Job Shop Manufacturing and Re-entrant Manufacturing processes. In addition to the basic control and scheduling systems, the author also highlights advance research in numerical optimization methods and wireless sensor networks and their impact on intelligent production planning and control system operation. Enables students, researchers and engineers to understand the fundamentals and theories of multi-agent based production planning and control Written by an author with more than 20 years’ experience in studying and formulating a complete theoretical system in production planning technologies Fully illustrated throughout, the methods for production planning, scheduling and controlling are presented using experiments, numerical simulations and theoretical analysis Comprehensive and concise, Multi-Agent Based Production Planning and Control is aimed at the practicing engineer and graduate student in industrial engineering, operational research, and mechanical engineering. It is also a handy guide for advanced students in artificial intelligence and computer engineering.
Download or read book Agent Based Manufacturing written by S.M. Deen and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-volume high-variety products like personalized cars or customized engines will be the key issues for manufacturing in the 21st century. The necessary control technology is based on the concept of holons, which are the units of production and behave as autonomous and cooperative agents, providing flexibility, adaptability, agility, and dynamic reconfigurability. This book presents the latest research results in agent-based manufacturing as carried out by researchers in academia and industry within the international "Holonic Manufacturing Systems" project. As this project was driven by industry, the results presented here are of vital interest not just to researchers in agent technologies or distributed artificial intelligence, but also to engineers and professionals in industry who have to respond to rapid changes and new demands in production.
Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.
Download or read book Multi Agent Systems written by Adelinde M. Uhrmacher and published by CRC Press. This book was released on 2018-10-08 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methodological Guidelines for Modeling and Developing MAS-Based Simulations The intersection of agents, modeling, simulation, and application domains has been the subject of active research for over two decades. Although agents and simulation have been used effectively in a variety of application domains, much of the supporting research remains scattered in the literature, too often leaving scientists to develop multi-agent system (MAS) models and simulations from scratch. Multi-Agent Systems: Simulation and Applications provides an overdue review of the wide ranging facets of MAS simulation, including methodological and application-oriented guidelines. This comprehensive resource reviews two decades of research in the intersection of MAS, simulation, and different application domains. It provides scientists and developers with disciplined engineering approaches to modeling and developing MAS-based simulations. After providing an overview of the field’s history and its basic principles, as well as cataloging the various simulation engines for MAS, the book devotes three sections to current and emerging approaches and applications. Simulation for MAS — explains simulation support for agent decision making, the use of simulation for the design of self-organizing systems, the role of software architecture in simulating MAS, and the use of simulation for studying learning and stigmergic interaction. MAS for Simulation — discusses an agent-based framework for symbiotic simulation, the use of country databases and expert systems for agent-based modeling of social systems, crowd-behavior modeling, agent-based modeling and simulation of adult stem cells, and agents for traffic simulation. Tools — presents a number of representative platforms and tools for MAS and simulation, including Jason, James II, SeSAm, and RoboCup Rescue. Complete with over 200 figures and formulas, this reference book provides the necessary overview of experiences with MAS simulation and the tools needed to exploit simulation in MAS for future research in a vast array of applications including home security, computational systems biology, and traffic management.
Download or read book Industrial Agents written by Paulo Leitão and published by Morgan Kaufmann. This book was released on 2015-03-13 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Agents explains how multi-agent systems improve collaborative networks to offer dynamic service changes, customization, improved quality and reliability, and flexible infrastructure. Learn how these platforms can offer distributed intelligent management and control functions with communication, cooperation and synchronization capabilities, and also provide for the behavior specifications of the smart components of the system. The book offers not only an introduction to industrial agents, but also clarifies and positions the vision, on-going efforts, example applications, assessment and roadmap applicable to multiple industries. This edited work is guided and co-authored by leaders of the IEEE Technical Committee on Industrial Agents who represent both academic and industry perspectives and share the latest research along with their hands-on experiences prototyping and deploying industrial agents in industrial scenarios. - Learn how new scientific approaches and technologies aggregate resources such next generation intelligent systems, manual workplaces and information and material flow system - Gain insight from experts presenting the latest academic and industry research on multi-agent systems - Explore multiple case studies and example applications showing industrial agents in a variety of scenarios - Understand implementations across the enterprise, from low-level control systems to autonomous and collaborative management units
Download or read book Information Technology for Balanced Manufacturing Systems written by Weiming Shen and published by Springer. This book was released on 2007-03-07 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: BASYS conferences were initially organized to promote the development of balanced automation systems. The first BASYS conference was successfully launched in Victoria, Brazil, in 1995. BASYS'06 is the 7th edition in this series. This book comprises three invited keynote papers and forty-nine regular papers accepted for presentation at the conference. All together, these papers will make significant contributions to the literature of Intelligent Technology for Balanced Manufacturing Systems.
Download or read book Holonic and Multi Agent Systems for Manufacturing written by Vladimír Mařík and published by Springer Science & Business Media. This book was released on 2011-08-19 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2011, held in Toulouse, France, August 29-31, 2011. The 25 revised full papers presented were carefully reviewed and selected from 36 submissions. The papers are organized in topical sections on industrial agents, simulation and modelling, planning and scheduling, smart technical systems, and MAS for unmanned aerial vehicles.
Download or read book Holonic and Multi Agent Systems for Manufacturing written by Thomas Strasser and published by Springer Science & Business Media. This book was released on 2009-08-17 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2009, held in Linz, Austria, August 31 - September 2, 2009. The 31 revised full papers presented were carefully reviewed and selected from 47 submissions. The papers are organized in topical sections on introduction & motivation, knowledge-centered approaches, selected theoretical aspects, MAS scheduling & simulation, holonic systems for manufacturing, and MAS & holonic applications.
Download or read book Industrial Control Systems written by Adedeji B. Badiru and published by CRC Press. This book was released on 2016-04-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues such as logistics, the coordination of different teams, and automatic control of machinery become more difficult when dealing with large, complex projects. Yet all these activities have common elements and can be represented by mathematics. Linking theory to practice, Industrial Control Systems: Mathematical and Statistical Models and Techni
Download or read book Agent Based Approach For Supply Chain Management written by Dr. M S Uppin and published by Notion Press. This book was released on 2018-05-25 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is concerned with the application of basic concepts of Agent-based technology for the flow of information between various components of the supply chain formed for a manufacturing organization with following objectives: • Identifying issues related to sharing information as the most critical factor in supply chain activities • Addressing problems associated with sharing information both within and between different organizations • Sharing effective information by formulating an agent-based framework for supply chain management activities • To enhance the effectiveness of Supply chain management activities
Download or read book Multi Agent Systems for Concurrent Intelligent Design and Manufacturing written by Weiming Shen and published by CRC Press. This book was released on 2019-09-17 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agent Technology, or Agent-Based Approaches, is a new paradigm for developing software applications. It has been hailed as 'the next significant breakthrough in software development', and 'the new revolution in software' after object technology or object-oriented programming. In this context, an agent is a computer system which is capable of act
