Download or read book Aerodynamics of Airframe engine Integration of Supersonic Aircraft written by Mark R. Nichols and published by . This book was released on 1966 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Commercial Aircraft Propulsion and Energy Systems Research written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-09 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.
Download or read book Engine Airframe Integration written by and published by . This book was released on 1992 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Propulsion Systems Technology and Design written by Gordon C. Oates and published by AIAA. This book was released on 1989 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reusable Space Transportation Systems written by Heribert Kuczera and published by Springer. This book was released on 2011-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brings together for the first time details of the technology available and being developed to provide totally reusable launch vehicles for the future exploitation and exploration of space.
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Aeronautical Technologies for the Twenty first Century written by National Research Council (U.S.). Committee on Aeronautical Technologies and published by . This book was released on 1992 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Aerodynamic Methods for Direct and Inverse Applications written by Wilson C. Chin and published by John Wiley & Sons. This book was released on 2019-03-21 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: A powerful new monograph from an aerodynamicist reviewing modern conventional aerodynamic approaches, this volume covers aspects of subsonic, transonic and supersonic flow, inverse problems, shear flow analysis, jet engine power addition, engine and airframe integration, and other areas, providing readers with the tools needed to evaluate their own ideas and to implement the newer methods suggested in this book. This new book, by a prolific fluid-dynamicist and mathematician who has published more than twenty research monographs, represents not just another contribution to aerodynamics, but a book that raises serious questions about traditionally accepted approaches and formulations, providing new methods that solve longstanding problems of importance to the industry. While both conventional and newer ideas are discussed, the presentations are readable and geared to advanced undergraduates with exposure to elementary differential equations and introductory aerodynamics principles. Readers are introduced to fundamental algorithms (with Fortran source code) for basic applications, such as subsonic lifting airfoils, transonic supercritical flows utilizing mixed differencing, models for inviscid shear flow aerodynamics, and so on. These are models they can extend to include newer effects developed in the second half of the book. Many of the newer methods have appeared over the years in various journals and are now presented with deeper perspective and integration. This book helps readers approach the literature more critically. Rather than simply understanding an approach, for instance, the powerful "type differencing" behind transonic analysis, or the rationale behind "conservative" formulations, or the use of Euler equation methods for shear flow analysis when they are unnecessary, the author guides and motivates the user to ask why and why not and what if. And often, more powerful methods can be developed using no more than simple mathematical manipulations. For example, Cauchy-Riemann conditions, which are powerful tools in subsonic airfoil theory, can be readily extended to handle compressible flows with shocks, rotational flows, and even three-dimensional wing flowfields, in a variety of applications, to produce powerful formulations that address very difficult problems. This breakthrough volume is certainly a "must have" on every engineer's bookshelf.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1984 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Paper written by and published by . This book was released on 1987 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by United States. National Aeronautics and Space Administration and published by . This book was released on 1959 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Assessment of Aerodynamic Performance of V STOL and STOVL Fighter Aircraft written by and published by . This book was released on 1984 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aircraft Design written by Ajoy Kumar Kundu and published by Cambridge University Press. This book was released on 2010-04-12 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Design explores fixed winged aircraft design at the conceptual phase of a project. Designing an aircraft is a complex multifaceted process embracing many technical challenges in a multidisciplinary environment. By definition, the topic requires intelligent use of aerodynamic knowledge to configure aircraft geometry suited specifically to the customer's demands. It involves estimating aircraft weight and drag and computing the available thrust from the engine. The methodology shown here includes formal sizing of the aircraft, engine matching, and substantiating performance to comply with the customer's demands and government regulatory standards. Associated topics include safety issues, environmental issues, material choice, structural layout, understanding flight deck, avionics, and systems (for both civilian and military aircraft). Cost estimation and manufacturing considerations are also discussed. The chapters are arranged to optimize understanding of industrial approaches to aircraft design methodology. Example exercises from the author's industrial experience dealing with a typical aircraft design are included.
Download or read book Aerodynamic Design of Transport Aircraft written by E. Obert and published by IOS Press. This book was released on 2009-04-16 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origin of Aerodynamic Design of Transport Aircraft stems from the time when the author was appointed part-time professor in the Aerospace Faculty of Delft University of Technology. At the time his main activities were those of leading the departments of Aerodynamics, Performance and Preliminary Design at Fokker Aircraft Company. The groundwork for this book started in 1987 as a series of lecture notes consisting mainly of pictorial material with a minimum of English explanatory text. After the demise of Fokker in 1996 one feared that interest in aeronautical engineering would strongly diminish. As a result of this, the course was discontinued and the relationship between the author and the faculty came to an end. Two years later the situation was reappraised, and the interest in aeronautical engineering remained, so the course was reinstated with a former Fokker colleague Ronald Slingerland as lecturer. The lecture notes from these courses form the foundation of this publication.
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Information Output of the Langley Research Center for Calendar Year written by and published by . This book was released on 1981 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
