Download or read book Advances in Ultra Precision Machining Technology and Applications written by Benny C F Cheung and published by . This book was released on 2024-07-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-precision machining technology has been widely used in the manufacture of many mission-critical components for various industrial areas, such as advanced optics, photonics aerospace, the automotive industry, telecommunications, biomedical areas, energy, the environment, etc. Nowadays, ultra-precision machining technology is capable of producing workpieces with submicron shape accuracy, nanometer surface roughness, and high geometric complexity. Due to increasing geometrical complexity, high-precision requirements and the evolution of advanced materials of the workpiece being machined lead to numerous research challenges in different fields, including ultra-precision machining technologies, novel machining processes, cutting mechanics, surface generation mechanisms, novel machine design, advanced sensing, and machine metrology. In addition, the machining process can be accurately controlled through the modeling and simulation of ultra-precision machining processes, error compensation, materials sciences, measurement and on-machine metrology, as well as advanced applications for functional uses. This reprint aims to collate the latest research results on ultra-precision machining technology and applications in order to promote the development of related industrial technology with high efficiency, high precision, and intelligence.
Download or read book Advances in CMP Polishing Technologies written by Toshiro Doi and published by William Andrew. This book was released on 2011-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMP and polishing are the most precise processes used to finish the surfaces of mechanical and electronic or semiconductor components. Advances in CMP/Polishing Technologies for Manufacture of Electronic Devices presents the latest developments and technological innovations in the field - making cutting-edge R&D accessible to the wider engineering community. Most of the applications of these processes are kept as confidential as possible (proprietary information), and specific details are not seen in professional or technical journals and magazines. This book makes these processes and applications accessible to a wider industrial and academic audience. Building on the fundamentals of tribology - the science of friction, wear and lubrication - the authors explore the practical applications of CMP and polishing across various market sectors. Due to the high pace of development of the electronics and semiconductors industry, many of the presented processes and applications come from these industries. Demystifies scientific developments and technological innovations, opening them up for new applications and process improvements in the semiconductor industry and other areas of precision engineering Explores stock removal mechanisms in CMP and polishing, and the challenges involved in predicting the outcomes of abrasive processes in high-precision environments The authors bring together the latest innovations and research from the USA and Japan
Download or read book Foundations of Ultra Precision Mechanism Design written by Stuart T. Smith and published by CRC Press. This book was released on 2003-09-02 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: The realm of ultra precision mechanisms, for example in controlling motion to small fractions of a micrometer, is encroaching into many fields of technology. This book aims to provide a bridge for those moving from either an engineering or physics background towards the challenges offered by ultraprecision mechanisms. Using case study examples, this book provides a guide to basic techniques and gives technical, analytical and practical information.
Download or read book Micro Cutting written by Dehong Huo and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro-Cutting: Fundamentals and Applications comprehensively covers the state of the art research and engineering practice in micro/nano cutting: an area which is becoming increasingly important, especially in modern micro-manufacturing, ultraprecision manufacturing and high value manufacturing. This book provides basic theory, design and analysis of micro-toolings and machines, modelling methods and techniques, and integrated approaches for micro-cutting. The fundamental characteristics, modelling, simulation and optimization of micro/nano cutting processes are emphasized with particular reference to the predictabilty, producibility, repeatability and productivity of manufacturing at micro and nano scales. The fundamentals of micro/nano cutting are applied to a variety of machining processes including diamond turning, micromilling, micro/nano grinding/polishing, ultraprecision machining, and the design and implementation of micro/nano cutting process chains and micromachining systems. Key features • Contains contributions from leading global experts • Covers the fundamental theory of micro-cutting • Presents applications in a variety of machining processes • Includes examples of how to implement and apply micro-cutting for precision and micro-manufacturing Micro-Cutting: Fundamentals and Applications is an ideal reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, as well as machine tool designers. It is also a suitable textbook for postgraduate students in the areas of micro-manufacturing, micro-engineering and advanced manufacturing methods.
Download or read book Precision Manufacturing written by David A. Dornfeld and published by Springer Science & Business Media. This book was released on 2007-11-22 with total page 785 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision Manufacturing provides an introduction to precision engineering for manufacturing. With an emphasis on design and performance of precision machinery for manufacturing – machine tool elements and structure, sources of error, precision machining processes and process models sensors for process monitoring and control, metrology, actuators, and machine design. This book will be of interest to design engineers, quality engineers and manufacturing engineers, academics and those who may or may not have previous experience with precision manufacturing, but want to learn more.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Ultra precision Machining Technologies written by Julong Yuan and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS).This special volume presents the very latest findings and ideas in the field of ultra-precision machining. The topics covered include: Single-point diamond turning of optical materials or moulding dies; Single-point diamond turning of other materials; Ultra-precision grinding of optical materials or moulding dies; Ultra-precision grinding of hard materials; Ultra-precision polishing of optical materials or moulding dies; Ultra-precision polishing of single crystals or chemical-mechanical polishing; Ultra-precision polishing of metals or alloys; High-speed machining technology and applications; Ion beam figuring and polishing; Electron beam patterning and polishing; Ultra-precision laser machining; Ultra-precision electro-discharge machining; Ultra-precision coating; Glass moulding and plastic injection moulding of optical and electrical components; Fabrication of micro-electromechanical systems (MEMS); Ultra-precision machine tools; New ultra-precision machine and its machine elements; Ultra-precision positioning and control; Ultra-precision shape or surface-roughness measurement; New tools or new applications of tools; Other precision machining technology; Advanced manufacturing and design methods.This book will provide a valuable and fruitful reference source for researchers in the field of ultra-precision machining who wish to understand further the underlying mechanisms and to create new and practical design technologies, systems and processes. It will also be particularly useful for practising engineers who are responsible for providing efficient, precise and effective machining. Papers from a fall 2008 conference present the latest findings in the field of ultra-precision machining. Major themes include ultra-precision grinding and polishing of optical materials, moulding dies, hard materials, single crystals, and metals or alloys. Other areas explored include high-speed machining technology and applications, ion beam figuring and polishing, electron beam patterning and polishing, laser machining, electro-discharge machining, glass and plastic injection moulding of optical and electrical components, fabrication of micro-electromechanical systems (MEMS), ultra-precision machine tools, and advanced manufacturing and design methods. Specific topics covered include the white layer of hard-turned GCr15 bearing steel, surface modification of diamond to improve machining properties of an ultraviolet-curing wire saw, and laser and water-jet fiber coupling technology for micromachining. The book is illustrated with b&w images. It will be useful as a reference for researchers in the field of ultra-precision machining and for practicing engineers.
Download or read book Machining Recent Advances Applications and Challenges written by Luis Norberto L´opez de Lacalle and published by MDPI. This book was released on 2019-08-26 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue Machining—Recent Advances, Applications and Challenges is intended as a humble collection of some of the hottest topics in machining. The manufacturing industry is a varying and challenging environment where new advances emerge from one day to another. In recent years, new manufacturing procedures have retained increasing attention from the industrial and scientific community. However, machining still remains the key operation to achieve high productivity and precision for high-added value parts. Continuous research is performed, and new ideas are constantly considered. This Special Issue summarizes selected high-quality papers which were submitted, peer-reviewed, and recommended by experts. It covers some (but not only) of the following topics: High performance operations for difficult-to-cut alloys, wrought and cast materials, light alloys, ceramics, etc.; Cutting tools, grades, substrates and coatings. Wear damage; Advanced cooling in machining: Minimum quantity of lubricant, dry or cryogenics; Modelling, focused on the reduction of risks, the process outcome, and to maintain surface integrity; Vibration problems in machines: Active and passive/predictive methods, sources, diagnosis and avoidance; Influence of machining in new concepts of machine–tool, and machine static and dynamic behaviors; Machinability of new composites, brittle and emerging materials; Assisted machining processes by high-pressure, laser, US, and others; Introduction of new analytics and decision making into machining programming. We wish to thank the reviewers and staff from Materials for their comments, advice, suggestions and invaluable support during the development of this Special Issue.
Download or read book High Speed Machining written by Kapil Gupta and published by Academic Press. This book was released on 2020-01-31 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Speed Machining covers every aspect of this important subject, from the basic mechanisms of the technology, right through to possible avenues for future research. This book will help readers choose the best method for their particular task, how to set up their equipment to reduce chatter and wear, and how to use simulation tools to model high-speed machining processes. The different applications of each technology are discussed throughout, as are the latest findings by leading researchers in this field. For any researcher looking to understand this topic, any manufacturer looking to improve performance, or any manager looking to upgrade their plant, this is the most comprehensive and authoritative guide available. - Summarizes important R&D from around the world, focusing on emerging topics like intelligent machining - Explains the latest best practice for the optimization of high-speed machining processes for greater energy efficiency and machining precision - Provides practical advice on the testing and monitoring of HSM machines, drawing on practices from leading companies
Download or read book Advanced Machining Science written by Vijay Kumar Jain and published by CRC Press. This book was released on 2022-09-30 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: As machining processes become more advanced, so does the science behind them. This book emphasizes these scientific developments in addition to the more widely covered technological aspects, providing a full understanding of how machining has adapted to material constraints and moved beyond conventional methods in recent years. Numerous processes have been developed to allow the use of increasingly tough, corrosion-resistant, and temperature-resistant materials in machining. The advanced machining processes covered in this book range from mechanical, thermoelectric, and electrochemical, including abrasive water jet machining, electric discharge machining and micromachining, ion beam machining, and hybrid processes. It also addresses the sustainability issues raised by these processes. The underlying science of machining is centered throughout, as none of these processes can reach their full potential without both technical expertise and scientific understanding. Advanced Machining Science and its scientific approach will be of particular interest to students, researchers, and shop floor engineers.
Download or read book Basics of Precision Engineering written by Richard Leach and published by CRC Press. This book was released on 2018-04-09 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in engineering precision have tracked with technological progress for hundreds of years. Over the last few decades, precision engineering has been the specific focus of research on an international scale. The outcome of this effort has been the establishment of a broad range of engineering principles and techniques that form the foundation of precision design. Today’s precision manufacturing machines and measuring instruments represent highly specialised processes that combine deterministic engineering with metrology. Spanning a broad range of technology applications, precision engineering principles frequently bring together scientific ideas drawn from mechanics, materials, optics, electronics, control, thermo-mechanics, dynamics, and software engineering. This book provides a collection of these principles in a single source. Each topic is presented at a level suitable for both undergraduate students and precision engineers in the field. Also included is a wealth of references and example problems to consolidate ideas, and help guide the interested reader to more advanced literature on specific implementations.
Download or read book Environmentally Benign Machining written by Şenol Bayraktar and published by CRC Press. This book was released on 2024-09-05 with total page 245 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides essential information on environmentally benign/sustainable machining processes including innovations and developments in conventional machining, considering economy, safety, and productivity. Developments in machine tools, recent research on green lubricants and lubrication techniques, process hybridization, and the role of optimization techniques are discussed. Green machining of difficult-to-machine materials and composites is also explained with attempts towards making electric discharge and electrochemical machining technologies. Features: Covers up to date and latest information on environmentally benign machining technologies. Includes current approaches regarding the machinability properties of biomaterials, smart materials, and difficult-to-cut materials. Reviews theoretical understanding and practical aspects of using different technological approaches to attain sustainability in machining. Includes sustainability aspects for both conventional and modern machining. Aids industrial users in the optimum selection of machining parameters with regard to sustainability. This book is aimed at researchers and professionals in manufacturing and mechanical engineering, and sustainable processes.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2008-01-22 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials updates our knowledge on the metal cutting processes in relation to theory and industrial practice. In particular, many topics reflect recent developments, e.g. modern tool materials, computational machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, and generation and modelling of surface integrity. This book addresses the present state and future development of machining technologies. It provides a comprehensive description of metal cutting theory, experimental and modelling techniques along with basic machining processes and their effective use in a wide range of manufacturing applications. Topics covered include fundamental physical phenomena and methods for their evaluation, available technology of machining processes for specific classes of materials and surface integrity. The book also provides strategies for optimalization techniques and assessment of machinability. Moreover, it describes topics not currently covered in other sources, such as high performance and multitasking (complete) machining with a high potential for increasing productivity, and virtual and e-machining. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks but also new potential (emerging) applications such as micro- and nanotechnology. - Many practical examples of modern machining technology - Applicable for various technical, engineering and scientific levels - Collects together 20 years of research in the field and related technical information
Download or read book Advances in Manufacturing Technology XVII 2003 written by Y. Qin and published by John Wiley & Sons. This book was released on 2003-10-24 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing Technology XVII continues a well-respected series with the papers presented at the 1st International Conference on Manufacturing Research (ICMR 2003) - incorporating the 19th National Conference on Manufacturing Research (NCMR). This essential text provides a thorough review of all aspects of manufacturing engineering and management and will be of interest to all those involved in this rapidly advancing sphere of mechanical and manufacturing engineering. Topics covered include Machining Processes and Tooling Forming Processes and Tools Advanced Manufacturing Techniques Advanced Manufacturing Systems Design Methods, Processes, and Systems CAD/CAM Testing/Experimentation/Metrology Internet and E-design/Manufacture Virtual Enterprise and Enterprise Integration
Download or read book Machining of Hard Materials written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-02-24 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hard machining is a relatively recent technology that can be defined as a machining operation, using tools with geometrically defined cutting edges, of a work piece that has hardness values typically in the 45-70HRc range. This operation always presents the challenge of selecting a cutting tool insert that facilitates high-precision machining of the component, but it presents several advantages when compared with the traditional methodology based in finish grinding operations after heat treatment of work pieces. Machining of Hard Materials aims to provide the reader with the fundamentals and recent advances in the field of hard machining of materials. All the chapters are written by international experts in this important field of research. They cover topics such as: • advanced cutting tools for the machining of hard materials; • the mechanics of cutting and chip formation; • surface integrity; • modelling and simulation; and • computational methods and optimization. Machining of Hard Materials can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals in machining and related industries. It can also be used as a text for advanced undergraduate or postgraduate students studying mechanical engineering, manufacturing, or materials.
Download or read book NASA Tech Briefs written by and published by . This book was released on 1991 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hybrid Machining written by Xichun Luo and published by Academic Press. This book was released on 2018-06-27 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Machining: Theory, Methods, and Case Studies covers the scientific fundamentals, techniques, applications and real-world descriptions of emerging hybrid machining technology. This field is advancing rapidly in industrial and academic contexts, creating a great need for the fundamental and technical guidance that this book provides. The book includes discussions of basic concepts, process design principles, standard hybrid machining processes, multi-scale modeling approaches, design, on-machine metrology and work handling systems. Readers interested in manufacturing systems, product design or machining technology will find this one-stop guide to hybrid machining the ideal reference. - Includes tables of recommended processing parameters for key engineering materials/products for each hybrid machining process - Provides case studies covering real industrial applications - Explains how to use multiscale modeling for hybrid machining
